Categories

Best Flash Umbrella Bracket Adapter

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

SUPON Flash Bracket U-Shape,180° Adjustable Swivel Umbrella Softbox Holder with 1/4 to 3/8 Screw &Nut Adapter and Cold Shoe Mount for DSLR Cameras,Speedlites,Tripod,Light Stand,Studio,LED Light

  • Special Design- This flash bracket can attach on your light stand and flash light, insert your photography umbrella or Softbox and adjust your angle....
  • Umbrella/Softbox Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella or softbox. Allows 180° swivel to adjust....
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash....
  • Cold Shoe Mount Bracket- Come with a cold shoe mount on top design fits DSLR camera flash speedlites or video LED light, studio light, monitor, ring....
  • Durable- The flash bracket is made of whole aluminum alloy,durable and solid to use..
Check Stock

SLOW DOLPHIN Camera Flash Speedlite Mount Swivel Light Stand with Umbrella Bracket Holder （2 PCS）

  • It can be applied to various flash,and many more speedlites..
  • 180 Degree Swivel Joint- lamp holder in reflective umbrella or soft light umbrella socket, and can adjust the flash back office degrees, 180 degrees....
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread..
  • High Quality Aluminum Alloy- The camera umbrella holder is made of aluminum alloy,durable and solid..
  • NOTE: Flash,Tripod and soft umbrella are not included This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position....
Check Stock

Camera Speedlite Mount Stand Flash Stand Bracket Umbrella Mount Holder Shoe Mount Compatible with Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes E Type-2 Pack

  • 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
  • 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
  • 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
  • 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
  • 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Check Stock

WELLMAKING U-Shape Camera Flash 180°Swivel Mount Bracket with Standard 1/4 to 3/8 inch Metal Male Screw Spigot Stud Compatible for Umbrella Softbox Reflector Holder Stand for Video Light Studio Light

  • 【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
  • 【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
  • 【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
  • 【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
  • 【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..
Check Stock

Impact Deluxe Umbrella Mount with Adjustable Shoe -

  • 180 DEGREE TILT and 360 DEGREE SWIVEL - Impact light stand bracket can tilt 180 degrees and swivel 360 degrees, allowing you to aim your flash or....
  • SPACE SAVING MOUNTING OPTIONS - Useful and versatile addition to any photography umbrella lighting kit.
  • this umbrella and flash bracket mount features....
  • MADE OF PREMIUM ALUMINUM ALLOY - This sturdy camera flash bracket is durable and can take a lot of beating, making it a....
  • MULTIPLE ADJUSTMENTS and SUITABILITY - Impact speedlight mount is a good alternative for mounting small light fixtures. It can be installed on any....
  • 1-YEAR WARRANTY - Unlike many flimsy, all-plastic competitors, our umbrella and flash holder is long-lasting and super....
Check Stock

Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes Studio Light LED Light 3 Pack

  • Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder.
  • Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does....
  • A hole specially designs for holding umbrellas,180° vertical and 360° horizontal adjustment.
  • Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand.
  • Note: Light stand, speedlite flash and umbrella are not included.
Check Stock

Universal 3-in-1 Tri-Hot Shoe Mount Flash Bracket Holder with 2 Umbrella Hole for Light Stand Camera Tripod Reflective Umbrella Studio Flash Soft Box Speedlite Diffuser

  • 1. The flash bracket is made of metal material, surface antioxidant treatment.
  • hot shoe mount is made of aluminium alloy, stainless steel spring, very solid.
  • 2. Three hot shoes can be adjusted independently within the rang of 15.5mm to 18.5mm, compatible with standard cold foot flashes of Canon, Nikon, Pentax, Ricoh, Olympus, Panasonic and so on.
  • 3. The flash holder can be removed from the tri-hot shoe mount.
  • the top of the holder with 1/4" screw hole which can be connected with 1/4"screw and extended to other use.
  • the flash holder uses gear meshing, can tilt from left to right within 180°.
  • locked by screw, easy to use together with spanner.
  • 4. The tri-hot shoe mount has a built-in lateral umbrella hole locked by push bar and reed, suitable for umbrella shaft of diameter less than 10mm.
  • 5. The umbrella holder has a vertical umbrella hole, suitable for umbrella shaft of diameter less than 10mm.
  • with a 18mm hole in the bottom, if used with 1/4" to 3/8" adapter screw, can be used with all kinds of light stands and tripods, including light stands with 15.8mm diameter head, and tripods or monopods with 1/4" or 3/8" screw head..
Check Stock

simorr Dual Cold Shoe Extension Bar Universal Cold Shoe Mount Bracket Plate Adapter, Camera Flash Brackets with 1/4\ Thread Holes for Microphone,Led Video Light,Audio Recorder Monitors-3483

  • Compatibility--S2 Speedlite bracket compatible with Godox speed light including:V1 AD200Pro AD200 AD400Pro V860II Series TT685 Series TT600 Series TT350 Series, etc Compatible.
  • Bowens S-Type Mount--Godox Bowens mount, easy to be attached with All Bowens Mount studio lighting accessories, softbox, modifiers, umbrella reflectors, snoot and more.
  • Adjustment -- Godox Flash gun holder bracket with removable gasket,for round head flashgun &square head flashgun,mount speedlite vertically or horizontally. adjustable handle precisely control tilt angle.
  • Portable -- Godox S2 speedlite bracket upgraded version from Godox S1 speedlite bracket, with greater compatibility and more compact design, fold it, can easily put it in your pocket.
  • Practical Design-- Godox Flash gun bracket,Firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite, with a hole specially designs for holding umbrella reflector.
Check Stock

Neewer Universal E-Type and S-Type Bracket Holder with Bowens Mount for Speedlite Flash Snoot Softbox Beauty Dish Reflector Umbrella Photo Studio

  • KIT INCLUDES: (1)S-Type Bracket Holder with Bowens Mount, (1)E-Type Bracket Holder, Suitable for Speedlite Flash Snoot Softbox Beauty Dish Reflector....
  • S-TYPE SPEEDLITE BRACKET: Great combination of L-type and T-type speedlite mounts and improved from them.
  • Smaller size, lighter weight, less space....
  • BOWEN MOUNT DESIGN AND FURTHER SUPPORT: Bowens mount design facilitates most studio flash accessories, such as softboxes, reflectors, beauty dishes....
  • E-TYPE SPEEDLITE BRACKET: The bracket has screw fittings for the flash mount, umbrella and tripod mount.
  • This bracket is an inexpensive way of....
  • PRACTICAL DESIGN: S-Type Bracket Holder Firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite, E-Type Bracket....
Check Stock

MagMod MagShoe v2 - Universal Cold Shoe Flash Mount for Off Camera Flash LED Light Panels Umbrella Modifiers MagBox PRO 42 Octa Softbox and MagBox PRO 36 Strip

  • STRONGER THAN EVER - MagMod re-engineered the popular MagShoe to support the larger, heavier MagBox PRO Octa and Grid Softboxes. The new MagShoe v2 features a gold anodized color top and improved neodymium, rare-earth magnets..
  • SECURES OFF-CAMERA FLASHES AND LIGHT MODIFIERS - The ergonomic and universal cold shoe bracket offers a firm locking mechanism that keeps your Speedlight flash, umbrella modifier, and large softbox in place. It includes a 1/4-20" adapter for flashes like the AD200 or mounting LED light panels and GoPro cameras..
  • LOCKS IN FAST - Simply slide in your flash, turn the lock, and you are good to go. You don't have to waste time, nor do you need to deal with small screws and nuts..
  • ADJUST THE ANGLE IN ANY WAY - The large squeezable button makes adjusts the MagShoe's position and locks it in any angle quickly. You can even tilt the MagBox PRO at a deep angle with one hand..
  • OFFERS EASY HANDLING - The ergonomic pistol grip and silky, smooth silicone coating are gentle on your hands when tightening the MagShoe to a stand or attaching an umbrella. The MagShoe v2 feels just right in your hand..
Check Stock

Neewer 35.4''/90cm Octagonal Softbox with S-Type Bracket Mount, Carrying Case Compatible with Neewer TT560 NW561 NW625 NW635 NW645 NW655 NW-670 750II Speedlites and Q3 AD200Pro Flash Strobe, etc

  • Great compatibility with NEEWER TT560 750II NW670 Series Speedlite Flash.
  • Unique speedlite mounting method: the speedlite can be clamped firmly into the mount both horizontally and vertically.
  • No Pre-assembly or Post Disassembly, Mounts with Light Pressure - No Touch-Fasteners.
  • Made of Impact Resistant ABS Plastic, Precise Stepless Tilt Control, Large Adjustment Handle, Integrated Umbrella Mount.
  • The plastic gasket of the inner bracket can be removed, so that larger size light can be installed on the bracket.
  • Adjustable for Different Shoe Mount Flashes and Barebulb Strobes, Allowing Depth and Spread Control of the Mounted Light Head.
  • Bowens S-Type mount design facilitates most studio flash accessories, e.g. Flash Snoot, softboxes, reflectors, beauty dishes, umbrella, etc.
Check Stock

TARION Camera Flash Bracket H-Type Mount Swivel Tilt Light Stand Metal Umbrella Softbox Holder Adapter 180° Adjustable for 1/4\ 3/8\ Lamp Mount Tripod

  • It fits for holding the softbox or umbrella on the light stand and allows for flashing from horizontal / vertical or at the middle and low position.
  • 180° adjustment supports any angle of flashing The flash can be fixed by the screw on the top of the adapter provide safety.
  • The detachable 1/4"-3/8" double-end nut at the bottom allows for installing your flash on the light stand or tripod freely.
  • Dimension approx 11.5x2.7 cm/ 4.5x1.1 " Diameter of umbrella hole approx 1.5 cm/ 0.6".
  • Suitable for 1/4" or 3/8" light stand tripod softbox umbrella or flash etc..
Check Stock