Best Flat End Mills

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

• 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
• Hardened and ground For Bridgeport type milling machines.
• Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
• 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
• For double and single end mills (single end mils only for sizes over 5/8").

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

• APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
• Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
• Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
• Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
• These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

LittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)

• Set of five 3 Morse taper end mill holders.
• Compatible with Mills with 3 Morse Taper Spindle.

LittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)

• Set of five R8 end mill holders from 3/16" to 3/4".

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

• Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
• 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
• Stub length end mills for extra rigidity.
• Fitted wood block stand included and each size comes in a marked plastic tube.
• Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

• Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
• Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
• Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

HHIP 1/2 INCH R8 Shell END Mill Holder (3900-1711)

• Diameter for Bore in Shell End Mill 1/2".
• Diameter range of standard end mills is 1-1/4 to 1-1/2"..

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

• Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
• Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
• This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
• Shell mills can easily be held with Straight Shank arbors.
• Clearance & relief angels are built into the base.

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

• 4 flute design for creating finer finishes and a higher metal removal rate.
• General purpose end mill for working on all types of materials.
• Made of extra-fine grade carbide for ultra high transverse rupture strength.
• Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

• High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
• Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
• Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
• Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
• Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

• Package Including:1pc 4 Flute T Type End Mills.

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

• Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
• Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
• When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
• Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
• Used for slotting and peripheral milling.