Categories

Best Flat Head Roofing Nails

Dubbs Hardware - 1.5 Inch Copper Nails Roofing Finish - Solid Pure Copper Slate Spikes Flashing Furniture Boat - Package Includes 10 oz of The Highest Quality Nails

  • PURE COPPER NAILS - Pure copper 1.5 inch roofing nails with a 3/8" head.
  • ROOFING NAILS - Great for roofing, boat building, or any other decorative projects.
  • INSTALLATION - To ensure no bending when hammering in, drill a 3/32" pilot hole for best results.
  • PACKAGE INCLUDES - Approximately 100 nails per 10 ounce pack of premium copper nail.
  • USA MADE - Proudly Made in the United States.
Check Stock

Senco 8V0001N 1-3/4\ 15 Degree Angle Wire Coil Nailer, Red/Gray - 445Xp

  • Drives 11 gauge (.120"), full round head roofing nails 3/4" 1-3/4" smooth shank..
  • Tool-free adjustable depth of drive for consistent and controllable nail set.
  • Adjustable nail canister accommodates entire range of true round-head roofing nails.
Check Stock

Shingle Removal Tool,Roof Shingle Remover Roof Shingle Nail Puller Shingle Pry Bar,Roofing repairs Removing and installing replacement shingles,Professional Roofing Tools

  • 【Handy And Premium Quality】Our Roof Shingles Removers are Made Of Premium High-strength Steel,Portable And Handy Size For Easily Using And Storage.With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot and Claw Tip Design】The Nail-slot Head Can Help You Put the Nails Easily.Claw Tip Can Remove Nails Easily From Roof Shingles,Roof shingle remover Makes it way easier to nail underneath shingles and do repairs.During installation, with the extended offset head that holds a roofing nail perfectly and you can strike the offset head with a hammer..
  • 【Repair more efficiently】Professional Roofing Tools,it makes replacing individual or multiple Shingles a BREEZE.It saved pulling out old nails and lining up the new ones, For those who don't like being on the ROOF any longer than needed..
  • 【A Must Have for All Roofers】Shingle Removal Tool is a must have tool for roofing repairs, it makes removing and installing replacement shingles a breeze without damaging the top overlapping and outer shingles especially if your dealing with a roof that has some age on it..
  • 【Quality assurance】Any questions , any reason, you’re not happy with your purchase, please contact u....
Check Stock

Solid Copper Nails - 1.5 Inch Smooth Shank Roofing Nails - Slating Spikes - Perfect For Copper Flashing Install - Wide Flat Head Design - Decorative Finishing (5 oz)

  • Solid 1.5 Inch Copper Nails - Used For Roofing, Slating, Flashing, Decor.
  • Flashing Kings Corrosion Resistant Copper Nails Are Perfect For Mounting Our Flashing Products.
  • Order With Confidence Our Products Are Covered By The Amazon A To Z Guarantee.
Check Stock

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

  • TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
  • APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
  • TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
  • COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.
Check Stock

Grip-Rite GRCR3DGAL 1-1/4-Inch-by-15-Degree Galvanized Coil Roofing Nail (7,200 per Box)

  • 1-1/4-by-.120-by-3/8-inch diameter thin flat head.
  • "High Wire" collation compatible with most tools.
Check Stock

Grip-Rite GRCR2DCGAL 7/8-Inch by 15-Degree Wire Collated Galvanized Coil Roofing Nail (7,200 per Box)

  • 7/8" x .120" x 3/8" Diameter Thin Flat Head.
  • "High Wire" Collation Compatible with Most Tools.
  • Use with Grip-Rite GRTCR175 Coil Roofing Nailer.
Check Stock

Grip-Rite GRCR5DGAL 1-3/4-Inch by 0.120-by-15-Degree Galvanized Coil Roofing Nail, 7,200 per Box

  • 1-3/4-inch by .120-inch by 3/8-inch Diameter Thin Flat Head.
  • "High Wire" Collation Compatible with Most Tools.
  • Use with Grip-Rite GRTCR175 Coil Roofing Nailer.
Check Stock

Round Plastic Cap Nail 1 Inch Roofing Nails Galvanized Tar Paper Nails for House Wrap Fastening Foam Board Roofing Felt Insulation Film 4000

  • Sufficient Quantity: you will receive 4000 pieces of plastic cap nails, ample amount to satisfy your daily use and replacement demands, you can also share with your friend.
  • Quality Material: the nail caps are made of quality plastic, reliable and sturdy, not easy to break or deform.
  • The nails are electro galvanized treatment, not easy to rust or corrode, providing you with a long use time.
  • Size Information: the nail cap is about 29/32 inches in diameter, the hole measures approx. 3 mm/ 7/64 inches in diameter, the roofing nails are approx. 1 inches in length.
  • Please check the dimension before purchasing.
  • Creative Design: the round plastic caps adopt a flexible round head that conforms to surfaces, making it harder for water to get under the cap, the integrated design saving you time and energy, convenient for you to use.
  • Where to Apply: the tar paper nails are widely applicable, suitable for securing roofing felt, sheathing, anchoring house wrap, fastening foam board, bringing you much convenience when using.
Check Stock

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

  • [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
  • [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
  • [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
  • [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
  • [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..
Check Stock

1\ Smooth Shank Pure Copper Nails for Slating & Roofing 11 Guage USA Made by Metal Magery (Pack of 50)

  • Pure Copper 1" Roofing Nails with 3/8" Head..
  • High Quality Nails Perfect for DIY, Home Building Projects, Decor, Boat Building and Much More..
  • Also used for Slate Roofs, Rain Gutters, Fascia Installation, Furniture Restoration, and Much More..
  • Package includes Quantity 50 Solid Copper 1" Nails.
Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

  • Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
  • 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
  • Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
  • Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
  • Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
Check Stock

Freeman FR.131-3B 21 Degree .131 x 3 Plastic Collated Brite Finish Smooth Shank Full Round Head Framing Nails 2000 count

  • ...ble for many framing and general construction applications. They offer appropriate holding power for most everyday uses..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt..
Check Stock