Yost Vises 904-AS 4 Heavy Duty Steel Bench Vise

  • Bench-mount vise with 4" nominal top jaw width and 1/4"- to 1-1/2"-diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Cast steel body is painted black for mild protection against corrosion and has flat portion that acts as a reinforced anvil and an additional work....
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

Yost Vises 910-AS 10" Heavy Duty Steel Bench Vise

  • Bench-mount vise with 10" nominal top jaw width and 7/8"- to 2-5/8"- diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Cast steel body is painted black for mild protection against corrosion and has flat portion that acts as a reinforced anvil and an additional work surface.
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

QWORK Flat Pliers Leather Press Pliers, Leather Edge Adjustment Flattening Pliers, DIY Leather Craft Tools for Bag Belt

  • Steel: Made of high quality steel, coated with rubber coating, quenched and heat-treated, high hardness, good toughness and long service life..
  • Strong bite force: The leather pliers bite force is strong, the jaws polished flat and tight, helping you save labor and time..
  • Fit: The jaws are not perfectly straight, but slightly curved for better fit to various leather shapes..
  • Easy to use: The jaws are polished flat and tight to help you save work and time, easy and safe to use..
  • Widely used: Perfect for leather products, such as wallets, handbags, bags, etc. it is a great tool for DIY leather craft lovers..
Check Stock

PIILOO Knife Making Tongs Set Assembled Knife Making Blacksmith Bladesmith Anvil Forge (3PCS)

  • V-Bit Blade Tongs– Extremely versatile and effective in respect to processing wider flat stock sizes up to 1 1/2 inches, 1/4 inch thickness or less. Designed with deep V groves in the jaws to insure that your flat stock will remain deadlocked while delivering heavy hammer blows..
  • Blade Tongs–Designed for knife-smiths and will allow you to grip the knife in different positions when drawing out the blade. Lightweight and durable, these tongs will handle a variety of stock thickness from 1/8 to 3/8 inches, making it easy to transition from forging to anvil..
  • Flat Tongs–For 1/4 inch flat stock. These tongs are made of thinner materials, making the tongs lighter and easier to handle when using smaller stock sizes. They are perfect for almost all projects and can be shaped into box jaws, wolf jaws or v-bit tongs to accommodate various sizes of metal..
  • Material–Forged from high quality steel round stock, and finished with non-slip wax to protect from rust and corrosion. The size of all tongs is about 15 1/2 to 16 inches, making them easy to maneuver in addition to keeping your hands and forgings at a safe distance when removing steel..
  • Function–All tongs will provide you with excellent grip and deadlock the work piece so that you can accurately contro....
Check Stock

Yost Vises 908-HV 8\ High-Visibility Heavy Duty Steel Bench Vise

  • Bench-mount vise with 8" nominal top jaw width and 3/4"- to 2-1/4"-diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Yellow-painted cast steel body is highly visible for safety and has a flat portion that acts as a reinforced anvil and an additional work surface.
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

Yost Vises 910-HV 10" High-Visibility Heavy Duty Steel Bench Vise

  • Bench-mount vise with 10" nominal top jaw width and 7/8"- to 2-5/8"-diameter pipe capacity provides clamping action for light-duty applications.
  • 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place.
  • Yellow-painted cast steel body is highly visible for safety and has a flat portion that acts as a reinforced anvil and an additional work surface.
  • Replaceable top jaws and built-in pipe jaws are grooved for enhanced grip.
  • Main screw that controls the jaws is covered by a bar to protect it from damage.
Check Stock

TRISENSE 6' Vise Jaws with Strong Magnetic, Universal Soft Vice Jaws Pads Covers, Multi-Purpose Protector for Any Metal Vice,2 pcs,Golden

  • PERFORMANCE: Aluminum 6" Vise Jaws can use on any metal Vise for holding wood, metal, plastic, tubing, threaded items safely to protect any product flat or round..
  • APPLICATION: The magnetic Vise jaws are great with variety of vices, including vice block, bench vices, mill clamps, drill press vices and so on..
  • ADVANTAGE: Strong embedded magnets keep vice jaws in place securely..
  • DESIGN: Special designed V-Shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping..
  • Great for holding wood, metal, plastic. Ideal for all kinds of shop, craft, jewelry, and gunsmithing projects..
Check Stock

TEKTON 10-1/2 Inch Fencing Pliers | PSP10010

  • STAPLE AND NAIL PULLER: The parallel jaws can grip the crown of a staple or the head of a nail and easily pry them out.
  • WIRE SPLICER: Use the top and bottom jaws to isolate two strands of wire for splicing or separating.
  • the bottom jaws are large enough to grip and twist multiple strands of wire.
  • STAPLE STARTER: Use the two jaw openings to hold a staple in place and drive it with a hammer.
  • start a staple with one hand by gripping it in the upper jaws and swinging it into the post.
  • STRIKING FACE: The flat surface is less prone to chipping and deformation than a serrated surface.
  • hit the striking face with a hammer to drive the claw under a staple.
  • STAPLE CLAW: The longer, more pointed claw gives better access for prying out staples.
Check Stock

Knife Making Tongs Set Bladesmith Blacksmith Knife Tong Anvil Vise Forge (4 Tongs)

  • 【Professional-Grade Steel Jaws】These tongs are forged with heavy-duty steel and finished with linseed oil to protect from rust and corrosion. They can fully articulate and supply exceptional vise gripping strength on the work-piece during heavy hammer bufftes..
  • 【Flat Tongs】Flat Tongs For 1/4 inch flat stock. The jaws of the pliers have a smooth surface that will not scratch the workpiece..
  • 【V Bit Tongs】Designed to hold 5/8'' square and round stock. Designed with a deep V Grove to ensure that your buttstock remains deadlocked while being able to withstand heavy hammering. Extremely versatile tongs..
  • 【Blade Tongs】For flat stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide. Designed to hold the majority of stock sizes according to knife making..
  • 【Wolf Jaw tongs】Designed for holding a variety of stock sizes including Flat, Square and Round stock. Offering a superior grip. It is very suitable for reaching inconvenient areas and is essential in many cases..
Check Stock

Knife Making Tongs Set and Blacksmiths’ Hammer Assembled Bladesmith Blacksmith Forge Tongs Tools Set Vise Tools with 1500G / 3.3LB Blacksmiths’ Hammer – 4Pcs

  • V-Bit Blade Tongs-- Extremely versatile and effective in respect to processing wider flat stock sizes up to 1 1/2 inches, 1/4 inch thickness or less. Designed with deep V groves in the jaws to insure that your flat stock will remain deadlocked while delivering heavy hammer blows..
  • Blade Tongs--Designed for knife-smiths and will allow you to grip the knife in different positions when drawing out the blade. Lightweight and durable, these tongs will handle a variety of stock thickness from 1/8 to 3/8 inches, making it easy to transition from forging to anvil..
  • Flat Tongs--For 1/4 inch flat stock. making the tongs lighter and easier to handle when using smaller stock sizes. They are perfect for almost all projects and can be shaped into box jaws, wolf jaws or v-bit tongs to accommodate various sizes of metal..
  • Blacksmiths’ Hammer--1500g (3.3 pound) weight blacksmith’s hammer has a good feel and balance that offering a solid feel of control. The hammer could be used for sheet-metal, mild wrought iron and forging works. Also fit for others who need pounding things..
Check Stock

Titan Attachments Heavy Duty Post and Tree Puller for Skid Steers Universal

  • ...tachment is equipped with 2 x 10-inch hydraulic cylinders to power the jaws. This equipment delivers 3,000-pounds of clamping force to pull stubborn tree roots or fence posts directly from the ground. Additionally, the jaws have a single hinge pin for a strong attachment and increased durability..
  • INCLUDES HOSES AND FLAT-FACED COUPLERS: This attachment tool is provided with flat-faced couplers and hoses to maintain consistent pressure levels during operation. These features come together to preserve the longevity of the attachment. They also protect your landscape kit and accessories investment and allow you to accomplish more work over a more extended period..
  • RUGGED STEEL TEETH: This attachment has powerful reinforced steel jaws with rugged 1-inch-thick metal teeth to remove tough roots and wood fencing posts from the ground. These jaws can eliminate 12-inch-wide trees directly from the environment without leaving any pieces behind..
  • DURABLE CONSTRUCTION: Since this attachment is used in rough or damp environments for landscaping or farm work, we have finished the steel with a powder coating making it more resistant to corrosion and rust over time. This corrosion resistance is essential to keep the attachment in working order for years to come..
Check Stock

PHUKIMLONG CKS275 2-3/4 Inch Wood Lathe Chuck Set with 1\-8TPI Includes 2.75 Gear Chuck 5 Interchangeable Jaws, 1 Wood Screw,3 Years Warranty

  • PRODUCT INCLUDES: (1) 2.75 Inch chuck body with 1”-8TPI Thread, (5)self-centering jaw sets, (1) woodworm screw chuck, (1) gear key, (1) Allen wrench, (8) screws, (1) Aluminum storage case.
  • Jaw Includes: Interchangeable dovetail jaws, step jaws, and internal/external grip jaws , Interchangeable flat lathe chuck jaws with 8Ea*short and 8Ea*long multi-position grip-studs.
  • Material: PHUKIMLONG Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with Black oxidation treatment. for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life..
  • Application: This CKS275 2-3/4"Wood Lathe Chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects..
  • LIFETIME WARRANTY: PHUKIMLONG are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer..
Check Stock

Klein Tools 63050-INS Cable Cutter, Insulated Cable Cutter w/One-Hand Shearing for Aluminum, Soft Copper, Communications Cable

  • Handles have heavy vinyl grips with flat grips ends for 90-degree cuts.
  • All-purpose, center-cut jaws for soft, medium, and hard metals.
  • Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life.
  • Lockplate reinforcement prevents jaw bolts from loosening or turning, keeps jaws in correct alignment.
  • Cutting capacities for soft and medium materials is up to Brinell 300, Rockwell C31.
  • Cutting capacities for hard materials is up to Brinell 400, Rockwell C42.
Check Stock