Categories

Best Flexible Joint Sealant

Sound and Fire Rated Acoustical Putty Pads - Box of 10

  • TESTED AND LISTED: For up to 3-hours in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079) and CAN/ULC S115.
  • FORMS AN EFFECTIVE WATER BARRIER: Meets the UL Water Leakage Test achieving a Class 1 W Rating in accordance with ANSI/UL 1479.
  • ONE-PART, NON-SLUMP SILICONE SEALANT: For use in both through- penetration and construction joint applications—cures to form a flexible seal.
  • WITHSTANDS CONSTRUCTION CONDITIONS: Durable sealant provides excellent weatherability during construction.
  • EASILY RE-ENTERABLE: Formulated as a re-enterable and repairable fire barrier solution.
  • PRIMER PAINT READY: Sealant is paintable with primer.
  • For industrial/occupational use only. Not for consumer sale or use.
Check Stock

EWT (3mm Thick) Asphalt Tarmac Parking lot Joint and Crack Sealer Repair Hot-Filler II Tape 2IN x 50 FT Long (3mm Thick)

  • ✔️ EXTREME TEMPERATURES are no match for this joint sealant. It stays flexible and pliable in both high heat and low temperatures. It is waterproof and salt-resistant..
  • ✔️ CURES IN 30 MINUTES, unlike cheap hardware store alternatives. This commercial-grade sealant is traffic ready in just half an hour..
  • ✔️ FILL UP TO 15,000 LINEAR FEET OF CRACKS PERMANENTLY AND PROFESSIONALLY with commercial-grade hot-applied crack and joint sealant for asphalt and concrete. Use for cracks up to 1.5 inches wide..
  • ✔️ RECOMMENDED FOR Airports, roads, parking lots, municipal streets, gaps in asphalt joints driveways, and other pavement surfaces. Dries quickly..
  • ✔️ 30 LB BOXES so you can handle them easily and melt the bricks of crack filler in a direct-fire or oil-jacketed melter. Melt to 380 - 400°F (193 - 204°C)..
Check Stock

4 Pieces Silicone Caulking Tool Caulk Remover Tool Finishing Tools for Bathroom Kitchen and Frames Sealant Seals (Black, Blue)

  • Material: 4 pieces good sealant finishing tools, the black one is made of hard plastic.
  • The others are made of flexible plastic, durable and not easy to be broken though you break it hard.
  • Simple to use: use directly without masking tape or cleaning afterwards, save time, easy to use and handle, make your silicone sealant seal work like a professional plumber.
  • Silicone finishing tools: it’s an good tool for smoothing sealing lines, caulking lines.
  • Finish to most silicone jobs, any edge, corner, joint.
  • Save cost: the caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant, no need for masking tape, convenient and quick to use, saves money and time.
  • Wide use: apply to kitchen bathroom fitter sink, DIY works or floor silicone sealant sealing.
  • Works with most types of sealant, silicone, acrylic, resin, grout and more.
Check Stock

3M 1000 NS 20 Oz. Fire Barrier Water Tight Sealant (Pack of 1)

  • TESTED AND LISTED: For up to 3-hours in accordance with ASTM E814 (UL 1479), ASTM E1966 (UL 2079) and CAN/ULC S115.
  • FORMS AN EFFECTIVE WATER BARRIER: Meets the UL Water Leakage Test achieving a Class 1 W Rating in accordance with ANSI/UL 1479.
  • ONE-PART, NON-SLUMP SILICONE SEALANT: For use in both through- penetration and construction joint applications—cures to form a flexible seal.
  • WITHSTANDS CONSTRUCTION CONDITIONS: Durable sealant provides excellent weatherability during construction.
  • EASILY RE-ENTERABLE: Formulated as a re-enterable and repairable fire barrier solution.
  • PRIMER PAINT READY: Sealant is paintable with primer.
Check Stock

3M Polyurethane Sealant 540, Gray, 310 mL Cartridge

  • Polyurethane Seam Sealer/Adhesive Compound is a one component, moisture-cure sealant designed exclusively for automotive uses..
  • This product cures under the effect of atmospheric humidity to form a permanently flexible and resistant joint..
  • This product is a high quality elastomeric sealant formulated to combine high flexibility with high ultimate strength, permanent bonds and long service life..
  • This product provides excellent adhesion to a wide variety of substrates and comes in an easy to use, non-sag consistency suitable for easy application with a standard caulking gun in both horizontal and vertical automotive joints..
  • Easy application, ready to use, no mixing required.
Check Stock

Sika Backer Rod, Gray, Polyethylene Foam, Closed Cell Used to Partially Fill deep Cracks or Joints Before applying sealant, 3/4\ Diameter x 20' Long

  • Sika Backer Rod is inserted into a joint to control sealant depth and to prevent 3 sided adhesion.
  • DURABILITY: Good temperature resistance and will not absorb water..
  • PERFORMANCE: Partially fills deep cracks before sealant application. Oil and most other solvents resistant..
  • SUPPORTS: Ideal for glazing installations, expansion joints, window and door perimeters, copings, and pavement joints..
  • APPLICATION: Highly flexible, compressible and easy to apply. Use the product to partially fill up deep cracks or joints before applying sealant..
Check Stock

Loctite PL Self-Leveling Concrete Gray Limestone Polyurethane Sealant, 28 fl oz, Cartridge

  • Professional Grade Sealant: One-component, self-leveling polyurethane sealant designed for contraction/expansion joints and cracks in concrete floors and decks.
  • Self-Leveling Formula: Repair cracks in driveways, sidewalks and garage floors without tooling.
  • Durable and Flexible: Cures to form a highly resilient and abrasion-resistant seal that withstands joint movement and is ideal for applications exposed to pedestrian and vehicular traffic.
  • Weatherproof: Withstands harsh exterior environments and extreme temperature changes.
  • Loc VOC: Polyurethane formula with low VOC emissions meets strict federal and state guidelines.
Check Stock

Asphalt Crack Sealer for Driveways and Parking Lots (36 Boxes - 1,080 pounds)

  • ✔️ EXTREME TEMPERATURES are no match for this joint sealant. It stays flexible and pliable in both high heat and low temperatures. It is waterproof and salt-resistant..
  • ✔️ CURES IN 30 MINUTES, unlike cheap hardware store alternatives. This commercial-grade sealant is traffic ready in just half an hour..
  • ✔️ RECOMMENDED FOR Airports, roads, parking lots, municipal streets, gaps in asphalt joints driveways, and other pavement surfaces. Dries quickly..
  • ✔️ 30 LB BOXES so you can handle them easily and melt the bricks of crack filler in a direct-fire or oil-jacketed melter. Melt to 380 – 400°F (193 – 204°C)..
Check Stock

Kraken Bond RTV Silicone Grey Caulk - Door and Window Sealer, Water Resistant0 Universal Silicone Sealant for Kitchen & Bathroom, Anti Shrink Flexible Filler | 1 Pack, 10.1 Oz. Cartridge

  • ... 【 】RTV silicone sealant can be used for a variety of home improvement projects, including sealing around window and doors, DIY applications, bathroom, kitchen and plumbing applications..
  • 【 】Our grey silicone sealant is both resilient and flexible. In both low and high temperatures, this cartridge, which is used with a caulking gun, maintains flexibility..
  • 【 】 Ensure that the surface to be sealed is dry, clean, and grease-free. The depth should be much smaller than the width in order to minimize joint deformation. Reducing the depth to half the width of a wide joint is preferable. To spread the silicone caulk on the joint surface and achieve a professional finish, it should be processed with light pressure within 5 minutes of application..
  • 【 】You can use the window door caulk in most places with 4 different color options: black, white, gray, and transparent! Don't forget to check our store for other color options..
Check Stock

Do It Yourself Seal Coating in 7 Easy Steps!: Learn to Seal Coat like the pros!

  • ✔️ EXTREME TEMPERATURES are no match for this joint sealant. It stays flexible and pliable in both high heat and low temperatures. It is waterproof and salt-resistant..
  • ✔️ CURES IN 30 MINUTES, unlike cheap hardware store alternatives. This commercial-grade sealant is traffic ready in just half an hour..
  • ✔️ RECOMMENDED FOR Airports, roads, parking lots, municipal streets, gaps in asphalt joints driveways, and other pavement surfaces. Dries quickly..
  • ✔️ 30 LB BOXES so you can handle them easily and melt the bricks of crack filler in a direct-fire or oil-jacketed melter. Melt to 380 - 400°F (193 - 204°C)..
Check Stock

Sikaflex Mortar Fix Limestone Polyurethane sealant for repairing damaged mortar joints and gaps Sealing mortar cracks 10.1 fl oz Cartridge

  • Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in. (12.7 mm).
  • PERFORMANCE : Hides imperfections from tooling that a smooth sealant does not. High elasticity – cures to a tough, durable, flexible consistency....
  • SUPPORTS : Ideal for weatherproofing of joints between brickwork, blockwork, masonry, concrete or metal frames. Use for joints in walls, balconies,....
  • DURABILITY : Excellent resistance to aging, weathering. Can be used at 40 °F (4 °C)..
  • CONSUMPTION : 1 cartridge 10.1 fl. oz. (299 ml) creates approximately 12m of joint..
Check Stock

1-Gal. L3000 Concentrated Water-Based Lithium Silicate Densifier, Hardener, and Sealer for Concrete & Masonry

  • Elastic sealant designed for all types of joints and cracks where maximum depth of sealant will not exceed 1/2 in. (12.7mm).
  • PERFORMANCE: Suitable for vertical and horizontal joints. Can be used at 40°F (4°C). Capable of ±35 % joint movement. Can be painted with water-based, oil-based or rubber-based paints..
  • SUPPORTS: Ideal for: weatherproofing of joints, cracks and gaps in concrete, brickwork, blockwork, masonry, stucco and metal frame, joints in walls, floors, balconies, around window or door frames, expansion joints and roofing..
  • DURABILITY: Excellent resistance to aging and weathering. Durable, flexible with exceptional cut and tear resistance.
  • USES: Can be applied on green/new concrete 24 hours once harden and on concrete that has been wet 1 hour after water source has stopped. Crack filler.
Check Stock

HA6 Marine Grade RTV Silicone by Seal it Services | Anti-Mold Sealant | Marine Grade Adhesive | Stays Flexible After Cure | Multi-Use Product | White

  • ...is recommended for bonding, bedding, and sealing glass in aquarium construction. HA6 is also recommended for the manufacture of in-situ gaskets and seals. Our marine grade sealant is made for the most demanding physical conditions..
  • EASY-TO-USE: This adhesive is perfect for the most challenging sealing needs. It is flexible and strong, and can fix any leaks. To apply, use a standard sealant gun, with the nozzle cut at an angle of 45°, and an opening slightly larger than the joint to be sealed. For sealing and bedding, apply in the normal fashion and tool to a smooth finish one or two minutes after gunning..
  • GUARANTEED SATISFACTION: We proudly stand by all of our products! The HA6 RTV Silicone is guaranteed to meet and exceed your expectations. If you are not satisfied with your purchase for any reason, we offer a full refund. Shop with confidence, knowing that we provide the ultimate in quality service and products!.
Check Stock