QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall
- Float valves use a rod and float ball attached to a valve shutoff lever to control.
- Floating Ball Material: 304 Stainless Steel.
- Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
- This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
- Widely used in magnetic level switch and liquid level measurements.
Check StockJtuxcke Float Valve with Adjustable Arm Stable Water Float Valve Shut Off 1/2\ Automatic Waterer Float Ball Valve Fill Feed Tank Water Trough for Horse Cattle Goat Pig Dog - 3 Pack
- Package includes: 3 water valve float, spend less time filling and checking the water tank to protect the plants from drying..
- Automatic waterer for horses made of durable material: This float valve is durable with adjustable arms is made from high quality PVC (polyvinyl chloride) for horse waterer corrosion resistance..
- Automatic waterer float valve no leak: Automatic water valve have rubber washer ensures a tight, leak free kit.
- Automatic waters: Automatic float ball valve control the water inlet, it can add water automatically to achieve constant water level..
- Water float valve Applicable environment: Automatic water bowl float works great for stainless steel automatic waterer bowl water trough, humidifier, fountain, aquarium, ponds, livestock sinks, aquaponics, chicken,dog,horse,cattle, etc..
Check StockDanco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White
- TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
- TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
- TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
- when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
- TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
- EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
- BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
- SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
- COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check StockFloat Valve for Water Tank Stainless Steel Float Ball Valve 3/4 Inch DN20 Floating Ball Valve Switch Automatic Brass Toilet Valve Float Valves for Stock Tank Pool Water Level Control (2)
- Work Well: the metal float valve consists mainly of a curved arm and floating ball, well made and useful, nice for cutting, distributing and changing the direction of medium flow, and you can use it to control the level of water in a water tower or pool.
- Long Service Life: this floating ball valve is made of brass and stainless steel, sturdy and solid, reliable and serviceable to use, not easy to break, deform or bend, with nice corrosion resistance, able to be applied for a long time.
- Where to Apply: these float water valve have a wide range of applications, practical to use, suitable for water tanks, water towers, boiler machines, rice steamers, water pumps and other places you want.
- Well Sealed: the water tank float switch features a rubber seal, with nice flexibility, not easy to tear or wear, high temperature resistant, playing a fine sealing role.
- Meanwhile, its float rod can be adjusted, simple to use.
- Enough to Use: this package provides you with 6 pieces of float ball valves, whose model is DN20, thread is about 3/ 4 inch, applicable medium is water, able to withstand temperature of 0-50 degrees, sensitive and flexible, enough for you to use and replace.
Check Stock304 Stainless Steel Balanced Float Ball Valve Tank Mount 100 Psi 1 inch NPT Male…
- Balance pressure between piston and Valve, as well as smaller ball and shorter rod can bear high pressure..
- Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements..
- Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃.
- Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" Stainless Steel Float.
- Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.
Check StockNOMAL Brass Float Valve 1/2 inch Float Ball Valve Automatic Fill Adjustable Float Ball Valve for Livestock Waterer, Water Tank, Aquariums
- Size: 1/2" thread, can fit many pipe connection.
- No Leak: This float valve is sealed with rubber washer to ensure no leak.
- Easy to Use: Very easy to install and operate, you can adjust the water level by rotating the metal wingnut or the green float.
- Widely Used: Brass float valve can be applied for water trough, water tanks, livestock and poultry waterer, pools, aquariums, aquaculture, reservoirs and industrial, et..
Check StockJunniu Automatic Waterer Water Dispenser Trough Bowl Kits for Horse Dog Cattle Livestock Goat Pig Farm Supplies, with Float Valve, Water Hose, Stainless Steel Cover, Hole at the Bottom(Green)
- 【Package includes】 1 PCS Automatic water bowl (includes 1PCS 1/2 Inch float valve).
- 【Material】Automatic water bowl is Made with high performance material which is very durable and no rust, no deformation. 1/2 Inch Adjustable float valve is made of hard ABS, will not corrode or rust..
- 【Size】Automatic water bowl: About 11"(L)*10.6"(W)*5"(H), Could holds 4 liters of water.
- Pipe length:80cm/31.5 inch (Pipe diameter is 1/2").
- The float ball valve has a 1/ 2 NPT pipe thread,and the total length is about 24cm /9.44 inch..
- 【Easy to Use】Automatic water bowl could easily connects to 1/2" pipe, flex hose, or garden hose.With drainage hole at the bottom, which can discharge residual sewage, which is more convenient..
- 【Automatic Water Supply】Automatic water bowl can automatically replenish and cut off water through the float valve. The plastic float valve is light in weight and can accurately sense changes in the water level. When the water level rises to the horizontal line, the water source is cut off, and when the water level drops, water is added in time..
Check Stock1/2\ Float Ball Valve Automatic Fill Feed Humidifier Tank Pond Shut Off with Adjustable Arm for Ponds, Livestock Water Trough
- The mini float valve is durable with adjustable arms, made of hard ABS, will not corrode or rust.Non-toxic, tasteless, and can be used for drinking water. 1/2in BSP valve..
- No power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening..
- Auto Fill Valve is perfect for both permanent and temporary installations..
- Package includes:1 pack tank float valves.
Check StockMalida Water Filter Float Ball Valve,or Fish Aquarium Uses 1/4 Inch Supply Tube.
- Suitable for Reverse Osmosis System,Fish Aquarium,etc.
- PVC for corrosion resistance,Top mounted.
- Float Ball Valve Shut off Uses 1/4" Supply Tube.
- Tank mount with extended threads on inlet side of valve for mounting through tank wall.
- PVC Mini Float Valve, Tank Mount, Adjustable Arm.
Check Stock2 Pack 3/4\ Float Ball Valve Shut Off for Automatic Water Bowl Tank Mount with Adjustable Arm for Ponds, Livestock Water Trough, Aquariums, Aquaculture, Hydroponics and Reservoir
- PACKAGE INCLUDEDS: 2 packs tank float valves, spend less time filling and checking the water tank to protect the plants from drying.
- HIGH QUALITY MATERIAL: the mini float valve is durable with adjustable arms, made of hard ABS, will not corrode or rust.
- SIZE: the floating valve has a 3/4 NPT pipe thread.
- This is very common in the pipeline world. Overall is about 8.66 inch..
- EASY TO OPERATE: no power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening.
- APPLICATION: the water trough float valve is suitable for ponds, chickens, livestock sinks, aquariums, Aquaponics, aquaculture, hydroponic tank reservoirs.
Check StockFloat Ball Valve, 1/2 Inch Supply Tube Male Automatic Fill Feed Humidifier Tank Water with Adjustable Arm for Ponds, Livestock Water Trough, Aquariums, Aquaculture, Hydroponics and Reservoir (2 Pack)
- Package includes: 2 packs tank float valves, spend less time filling and checking the water tank to protect the plants from drying.
- No power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening.
- Material: the mini float valve is durable with adjustable arms, made of hard ABS, will not corrode or rust.
- Size: the floating valve has a 1/2 NPT pipe thread.
- This is very common in the pipeline world, the thread size is approx. 3/4 inch with standard gaskets to eliminate leakage.
- Applicable environment: the water trough float valve is suitable for ponds, chickens, livestock sinks, aquariums, Aquaponics, aquaculture, hydroponic tank reservoirs.
Check Stock3 Pcs Float Ball Valve, 1/2 Inch Water Tank Filter Float Ball Valve, Mini Supply Tube Water Float Valve with Adjustable Arm for Pool, Livestock Water Trough, Aquariums, Aquaculture (Black)
- Package quantity: 3 packs water tank float valves, which aim to reduce the time spent on filling and checking the water tank, sealing effect and high pressure.
- Using a smaller float control device, which can withstand greater fluid pressure.
- Adjustable arm: the micro float valve has an adjustable arm which is made of sturdy ABS, rugged and durable, rust-proof and corrosion-resistant, can be adjusted over 180 degrees.
- Dimension: the float ball valve has a 1/ 2 NPT thread, this is common in the pipeline world and the thread size is approx. 3/ 4 inch (with standard washer) to eliminate leakage.
- No power or pump required: the water float valves are applicable for low pressure gravity water supply systems.
- No power or pump required, hand tightening for leak-free operation.
- Wide range of use: the sink float valve is suitable for ponds, chickens, livestock pools, aquariums, fish and vegetables symbiosis, aquaculture, hydroponic reservoirs, and its adaptability is more than traditional metal float valves.
Check StockFltz Inc. Giant Inflatable Avocado Pool Float Lounge 5.5 x 3 Foot with Beach Ball Pit
- At 5.5' long and 3.5' wide, this float is truly giant! Made of high quality, durable vinyl..
- The only avocado pool floatie that includes a removable beach ball pit. With two avocado floats, makes for a great cornhole style game in the water..
- Pairs great with our other inflatable floats - pizza, pineapple, and American flag. Great for Instagram, Snapchat and Facebook..
- Makes for an excellent last minute holiday or Christmas gift / present for the avocado lover, vegan, or for anyone with a pool looking for the coolest float!.
- Features pinch valve that won't deflate when you let off the air inflow, also comes complete with a patch kit.DescriptionTHE ORIGINAL giant 5.5 x 3.5 foot Inflatable Avocado floatie, with removable beach ball pit. As featured on Good Morning America and Victoria's Secret Instagram page. Slightly angled design makes for a great lounge. High quality vinyl construction float designed to last longer than other, cheaper floats on the market. Great for use at the pool, lake, or beach! Float includes a patch kit and a pinch valve that won't start to deflate when you let off the air inflow..
Check Stock