Categories

Best Floor Jacks For Trucks

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

CAT 4000 Lb. 3-in-1 Garage Floor and ATV Jack with Tie-Down Straps- 240108

  • REPLACeS MULTIPLE JACKS: The patented 3-in-1 design fits cars, trucks, motorcycles, ATVs, even transmission, lawnmowers and snowmobiles!.
  • WIDE LIFT RANGE: Lift everything from lowered sports cars to lifted trucks, thanks to wide lift range, from a low of 5-1/2 inches (with the round saddle removed) to a high of 17-1/2 inches with the round saddle installed..
  • ULTRA STABLE AND SECURE: Thanks to a wide wheelbase, the 3-in-1 offers stability well beyond the average floor jack. For even more security, use the included tie-down loops with your tie-downs to secure the load..
  • NO NEED FOR JACKSTANDS: Slide the included safety bar in place and the 3-in-1 jack is securely locked in the raised position..
  • STRONG AND DURABLE: tested and certified to meet or exceed ASME and PALD standards..
Check Stock

Toro Part # 127-6666; 2020 and up Zero Turn Bulldog Mower Jack

  • REPLACeS MULTIPLE JACKS: The patented Triple Lift design fits cars, trucks, motorcycles, ATVs, even transmission, lawnmowers and snowmobiles!.
  • WIDE LIFT RANGE: From a low of 5-1/2 inches (with the round saddle removed) to a high of 17-1/2 inches with the round saddle installed..
  • ULTRA STABLE AND SECURE: Thanks to a wide wheelbase, the Triple Lift offers stability well beyond the average floor jack. For even more security, use the included tie-down loops with your tie downs to secure the load..
  • NO NEED FOR JACKSTANDS: Slide the included safety bar in place and the Triple Lift is locked in the raised position..
  • STRONG AND DURABLE: tested and certified to meet or exceed ASME and PALD standards..
  • Patented design features both a removable lift saddle and padded lift rails.
  • Flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.
  • Easily lifts cars, trucks, ATVs or removing/replacing transmissions or differentials.
  • Locking safety bar holds jack in place once raised eliminating the hassle of supporting a lifted vehicle with jack stands.
  • Lifting capacity of 4,000 pounds and meets or exceeds ANSI standards.
Check Stock

HOXWELL 2 Pack RV Leveling Blocks Wheel Chocks, Premium Heavy Duty Vehicle Wedge Design and Garage Grip Bottom for Travel Trailers, Camper, Truck, Car and ATV Orange 2 Pack

  • 【EXCELLENT LOAD CAPACITY】 Prevent up to 20,000lbs for your trailers and trucks from unintentionally moving, and work great on shop floors or lifts integrated grooves grip tires for added stability..
  • 【APPLICABLE TIRES】 These chocks normally fit for cars trailers caravans motorcycle vehicles Great for forklifts, floor jacks, and household loads too..
  • 【HIGH-GRIP DESIGN】 The specially designed curved shape of the wheel chock allows the vehicle's tire to fit perfectly on the wedge and improves grip..
  • 【COLOR for SAFETY】 The color of the wheel chock is invisible orange, which can ensure high visibility even in low light conditions. Perfect for Trucks, Trailers, Small Airplanes, RVs..
  • Weight (2 Pack): 7.4 Lbs, these professional-grade wheel chocks are great for helping you park your car..
Check Stock

Performance Tool W41044 Transmission Jack Adapter for Cars Trucks and other Vehicles

  • Transmission adapter for the removal and installation of passenger car and light duty truck transmissions.Fit Type: Universal Fit.
  • EASY ADAPTIBILITY: Vehicle lifter attachment converts floor jacks into transmission jacks.
  • Ideal for VW Beetle engine removal with rear engine placement.
  • COMPATIBILITY: Fits all floor jacks with 1-5/32” removable saddle shaft.
  • CONVENIENT POSITIONING: Adapter head tilts 30° forward and 30° backward & includes safety chain.
Check Stock

Powerbuilt 2 Ton Triple Lift Floor Jack Lifts Cars Trucks Motorcycles ATV s Transmissions Tie-Down Loops Locking Safety Bar - 620422E

  • REPLACeS MULTIPLE JACKS: The patented Triple Lift design fits cars, trucks, motorcycles, ATVs, even transmission, lawnmowers and snowmobiles!.
  • WIDE LIFT RANGE: From a low of 5-1/2 inches (with the round saddle removed) to a high of 17-1/2 inches with the round saddle installed..
  • ULTRA STABLE AND SECURE: Thanks to a wide wheelbase, the Triple Lift offers stability well beyond the average floor jack. For even more security, use the included tie-down loops with your tie downs to secure the load..
  • NO NEED FOR JACKSTANDS: Slide the included safety bar in place and the Triple Lift is locked in the raised position..
  • STRONG AND DURABLE: tested and certified to meet or exceed ASME and PALD standards..
Check Stock

Simpleout Electric Hydraulic Jack Kit - 4 in 1 Car Floor Jack Stands Set 3 & 5 Ton Auto Vehicle Air Trailer Truck Jack Roadside Emergency Tire Repair Kit with Built-in Inflator

  • 【ATTENTION PLEASE】: ⚠①Keep the engine on ②Be sure to use the electric jack on a flat and firm ground ③The scissor jack must be placed in the direction parallel to the car ④Please stay away from the car when the floor jack is working ⑤Do not use this car lift to lift trucks and large SUVs over 5 tons. .
  • 【POWERFUL HYDRAULIC CAR JACK】-This electric hydraulic floor jack has been upgraded with a powerful motor of an all-copper movement, which will achieve low power consumption and energy saving work easily with quick and stable performance. It is a better choice than any types of scissor jacks, if your budget allows..
  • 【QUICK Built-in TIRE INFLATOR】-This auto car jack kit is equipped with a built-in tire inflator to infalte a tire quickly. How to use it? Step 1 :Connect the power. Step 2: Attach the air inflation tube to the nozzle and tighten the nozzle nut. Step 3: Press the inflation button to inflate and check the display, restore to the middle "O" button to stop inflating..
  • 【4 IN 1 KIT】-The electric hydraulic jack kit includes a car jack with built-in inflator and other accessories. Thi....
Check Stock

OTC HDJ5 5 Ton Service Jack with Locking Handle and 6-3/8" to 22" Lifting Range

  • OTC's HDJ5 5-Ton Service Jack is an extremely safe and durable long chassis 5-ton floor jack that is the ideal size for lifting step vans, bucket trucks and smaller work vehicles.
  • Rugged, welded hydraulic pump and cylinder construction with rust resistant chrome plated ram.
  • built-in safety overload prevents using the jack beyond its rated capacity.
  • Handle lock and release controls are located on top of the 43 inch spring-loaded handle - handle can be locked into any position from vertical to horizontal.
  • Specifications: 6 to 22 inch lift range, 47 inch reach, 5-1/8 inch diameter, round saddle, 7.9 inch frame height, 43 inch, 3-position handle with lock and release controls, 4.4 inch fixed front (2), 2.8 inch mid-body swivel (2) casters.
  • Cycle tested design for a long life of professional duty and meets all 5 ASME PASE-2019 safety standards for service jacks.
Check Stock

Floor Jack Casters for 3 Ton Floor Jack, Cast Iron Caster Wheels, Quality Replacement Parts Fit for ATD, Cornwell, Mac Tools, Matco, Mountain, Napa, Sunex & More, Pack of 2 (12mm Stem)

  • Universal Compatibility - Fit for almost all floor jacks with hole above 12mm! Eg. ATD, Cornwell, Mac Tools, Matco, Mountain, Napa, Sunex.
  • Loading Capacity - Up to 3 Tons for 1 pair.
  • Fit for floor jacks with hole in diam. ≥ 12mm.
  • All our products are backed by our 100% manufacturer's warranty of 6 months. Pls feel free to return it for a refund for any quality issues.
Check Stock

Replacement Aluminum Racing Jack Caster Wheels for 3 Ton Floor Jacks (2 Pc Set)

  • Great replacement for damaged casters on aluminum racing jacks.
  • Please see dimension photo for fitment on your jack.
Check Stock

Brake Pad Set, for Emergency Brake Rear Kits, 4 Pads, Compatible with Dune Buggy

  • Allows for a safe and convenient jacking point.
  • Allows for other style jacks to be used including rolling floor jacks.
  • Compatible with Volkswagen Type-1 Beetle 1950-1979..
Check Stock

InstallerParts Keystone Jack Punch Down Stand

  • Punch Down Tool Stand Provides A Solid Base For Terminating Rj45 Keystone Jacks With An Impact Tool.
  • Safer Termination With A Sharp 110 Punch Down Tool.
  • Secure Surface For Terminating With A 110, Krone Or 66 Tool.
  • Quality Keystone Jack Tool Prevents The Stand From Chipping Or Cracking When Dropped On The Floor.
  • Convenient: No More Holding The Jacks With Your Hands When Punching Down Strands From Cat5 Or Cat6 Ethernet Cables.
Check Stock

Jack Boss Hydraulic Floor Jack 1.5 Ton 3,300Lbs Car Lift Portable Trolley Jack 360 Degree for Cars Automotive Sedans

  • [Capacity]Floor jack can lift up to 1.5 tons 3300 lbs with a lifting range height of 5.31"min to 13.2"max.Dimensions:18.3" x 7.7" x 5.3".Floor jack is used for most Sedans,suv,automotive.
  • [Durable Material and Portable] Heavy Duty floor jack with sturdy adopt a thick drop forged alloyed welded steel construction.Compact and nice car lifts are portable in the vehicle truck so as to get ready for emergencies.
  • [360 degree Flexible Swivel Casters &Rotating Saddle]Car jack is equipped with steel front caster and all the rear wheel,flexible and easy to move.Single piston quick lift pump let the hydraulic trolley jack raise desired height more smoothly and quickly.
  • [Protection Valve]The hydraulic system of service jack works real well for high lift with not too much force.Built-in internal safety valve and vent plug turn on automatic protection when press is overload to keep jacks from being damaged.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock