Categories

Best Floor Joist Jack

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • ...h (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not included).
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 4

  • Quantity of (4) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4″ adjustable floor joist bracket, (1) 2″ square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8″ sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 6

  • Quantity of (6) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 24

  • Quantity of (24) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 13

  • Quantity of (13) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 9

  • Quantity of (9) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

vikofan 4PCS Joist Hangers,4x6\ Black Joist Hanger Fit for Beam/Swing

  • High strength joist hangers: designed with high hardness Q235 steel plate structure and anti-rust coating. It has anti-deformation, anti-scratch and corrosion resistance properties. Can withstand all kinds of bad weather year after year, thus forming stronger and longer lasting joists..
  • Fits 2" x 4" lumber: Package includes 24 joist hangers, 48 self-tapping screws and 192 wood screws. Note: If you need to mount the hangers on concrete or steel pipe, please replace the screws with other types yourself (not included)..
  • Wide range of use: can be used in roof, deck, floor, swing set, handrail, fence and other wooden structures. Perfect for home, garden, amusement park, barn construction..
  • 3-step installation: 1. First fix the joist hanger on the top beam 2. Insert the cross timber into the joist hanger 3. Use wood screws to fix the cross timber..
  • Thoughtful service: If you have any questions or dissatisfaction about our products or services, please contact us by email. We will give you a satisfactory reply within 24 hours..
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

OEMTOOLS 24836 Hydraulic Floor Jack, 3-1/2 Ton Capacity, Car Jack Hydraulic Lift, Foot Pedal for Quick Vehicle Lift, Rapid Pump Jack, Rear Swivel Casters

  • HIGH-CAPACITY AUTO JACK: This hydraulic car lift is designed to lift 3-1/2 tons with minimal effort.
  • Reliable car floor jack, truck jack, SUV jack, and RV jack.
  • Lift jack not designed to support vehicles.
  • FAST LIFT FUNCTIONALITY: Our quick car jack includes a foot pedal for faster setup.
  • Excellent shop floor jack or garage floor jack for increased productivity.
  • Get to work servicing vehicles much faster with these floor jacks.
  • RAPID PUMP FLOOR JACK: This vehicle jack features a fast action dual pump design for quicker car lifting.
  • Heavy duty car jack makes it easy to lift and service standard vehicles.
  • Get the job done on time with this fast jack.
  • EASY TO MANEUVER: Our automotive floor jack comes with 360 degree rear swivel casters, making it an easy car jack to maneuver from vehicle to vehicle in your shop or garage.
  • PRODUCT SPECIFICATIONS: Weight Capacity: 3-1/2 Tons.
Check Stock

LukLoy 2x4 Joist Hanger 20 Gauge Galvanizing Face Mount Joist Hangers for Wood 10 Pack

  • ✅ HEAVY DUTY - LukLoy 2x4 joist hangers are made from 20 gauge galvanized steel for extra rust and corrosion resistance, creating a stronger, long-lasting joist-to-header connection..
  • ✅ MULTI USE: The joist hanger is designed for joist-to-header installation in wood-framed constructions like roofs, decking, floors, and ceilings. Joist hangers are much stronger than using nails or screws alone. They are also easier to fit and relatively cheap given the length of time they will last..
  • ✅ Easy Install: This joist hanger has speed prongs to temporarily position and secure the connector for easier and faster installation..
  • ✅ SIZE: For nominal lumber 2 x 4 (actual size 1-1/2″ X 3-1/2″), The package includes 10 pieces joist hangers..
  • ✅ 2 YEARS REPLACEMENT GUARANTEE! - If you have any questions or dissatisfaction with our products or services, please feel free to contact us by email, we will give you a satisfactory answer within 24 hours..
Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check Stock

FLEXIMOUNTS 4x8 Overhead Garage Storage Rack w/Hooks Adjustable Ceiling Storage Rack 96 Length x 48 Width x 40 Height 22 -40 Ceiling Dropdown Black

  • Avoid water damage by storing your items off the garage floor. Protect your items and use garage ceiling space to store seasonal and unused items.....
  • STRONG AND SECURE: Buy overhead storage racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the....
  • HIGH QUALITY: Thicker M8 screws selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely....
  • INTEGRATED GRID DESIGN: More stable and sturdy compared to others with separate frame and wire..
  • DIY INSTALLATION: Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing≤24", if joist spacing>24", only....
Check Stock

Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
  • 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
  • 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
  • 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
  • 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check Stock