Truck Exhaust Kits - Shop Line Dual Exhaust System 2.5 inch Aluminized Pipe Flowmaster 40 Series Chrome Tips
- Looking for the origional Flowmaster sound Then take a look at these 40 series Flowmaster mufflers..
- High Quiality 2.5 Mandrel Bent Aluminized Tail Pipes.
- Disclaimer This product does not interfere with any portion of the vehicles emissions control systems. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This product is in compliance with the Clean Air Act in full..
Check StockNEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3" CENTER INLET & OUTLET,BLACK
- Brand New Flowmaster Super 44 Series Chambered Muffler, 3" Center Inlet & Outlet, Black (Holley Part #943045).
- Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
- Features: Deep Aggressive Sound Exhaust Note | Noticeable interior resonance | Recent 2 chamber improvement | Race proven Delta Flow technology.
- NOTE: Universal Muffler - Not a direct fit. Some adaptation required..
Check StockNEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH
- Brand New Flowmaster Super 44 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #9430452).
- Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
- Features: Race proven Delta Flow technology | Recent 2 chamber improvement | Noticeable interior resonance | Deep Aggressive Sound Exhaust Note.
- NOTE: Universal Muffler - Some adaptation may be required..
Check StockDelkevic US Forestry Approved Spark Arrestor for 13" and longer Delkevic Oval and Tri-Oval Mufflers
- Compatible with Delkevic street bike mufflers.
- Fits first generation 13" tri-oval mufflers with turn down outlet. Does not fit tapered end cap..
Check StockNEW FLOWMASTER 40 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH
- Brand New Flowmaster 40 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #430402).
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you are looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
- Features: Durable fully welded 16 gauge aluminized steel | Aggressive Sound Exterior Exhaust Tone | Noticeable Interior Resonance | Excellent Street/Strip & Off Road application.
- NOTE: Universal Muffler - Some adaptation may be required..
Check StockNEW FLOWMASTER 40 SERIES CHAMBERED MUFFLER,OVAL,BLACK,DUAL 2.5" INLET & OUTLET,19" OVERALL LENGTH
- Brand New Flowmaster 40 Series Chambered Muffler, Oval, Black Finish, Dual 2.5" Inlet & Outlet (Holley Part #425404).
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you are looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
- Features: No internal packing to blowout | Excellent Street/Strip and Off Road application | Aggressive Sound Exterior Exhaust Tone | Durable fully welded 16 gauge aluminized steel.
- NOTE: Universal Muffler - Some adaptation may be required..
Check StockFLOWMASTER FLOWFX CAT-BACK EXHAUST SYSTEM,409S STAINLESS STEEL,4" BLACK CERAMIC TIPS,DUAL SAME SIDE EXIT,COMPATIBLE WITH 2009-2020 TUNDRA 4.6L, 4.7L & 5.7L
- Brand New Flowmaster FlowFX Cat-Back Exhaust System, 409s Stainless Steel, 4" Black Ceramic Tips, Dual Same Side Exit, Compatible with 2009-2020 Tundra 4.6L, 4.7L & 5.7L (Holley Part #717786).
- Introducing the new Flowmaster FlowFX Cat-back exhaust system. This bolt-on emissions legal system is perfect for the person looking for an exhaust with a moderately aggressive interior & exterior tone with all of the performance benefits that you would expect from Flowmaster. Features include dual 2.5"stainless steel mandrel-bent inlet tubes flowing into a FlowFX straight-through performance muffler, giving a deep powerful tone outside the truck with a deep mellow tone inside the cab..
- The dual 2.5" tailpipes exit in front of the passenger side rear tire & are finished off with a pair of large 4" double wall black ceramic coated stainless tips. Includes all necessary parts, hardware & detailed instructions for an easy at home install..
- Features: Large 4" Black Ceramic Coated Stainless Steel Tips | Straight-through FlowFX Series Performance Muffler | Dyno Tuned For Maximum Performance | Stainle....
Check StockSpeedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers
- Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
- Each tube is expanded on one end to allow easy slip fit installation.
- 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
- Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
- Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check StockSpeedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers
- Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
- Each tube is expanded on one end to allow easy slip fit installation.
- 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
- Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
- Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check StockDelkevic Stubby 14" Stainless Steel Oval Muffler
- This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
- Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
- This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
- No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
- Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check StockDelkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05
- Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
- This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
- No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
- Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check StockDelkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler
- Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
- This set includes all necessary hardware to mount the muffler onto the engine..
- No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
- Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check StockDelkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler
- Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
- This set includes all necessary hardware to mount the muffler onto the engine..
- No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
- Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock