Categories

Best Fluid Control Valves

International Door Closers Model 311 with

  • 105 Degree Backstop No Hold-Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ..., Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a b....
Check Stock

Mityvac MV6410 Pneumatic Air Operated ATF Refill System for Filling or Topping Off Transmissions Adapters for Connecting to Popular Car Models

  • Includes ten adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes, and Volvo transmissions.
  • Large 1.2 gallon (5 liter) fluid capacity.
  • Fluid is dispensed under pressure for smooth continual flow.
  • Integrated manual pump adds air above the fluid level to prevent aeration.
  • 5 feet fluid dispensing hose with flow control and auto shut-off valves.
Check Stock

Cozyel 12 GPM Air-Operated Air Diaphragm Double Diaphragm Pump Cast Iron 115 PSI Dual Diaphragm Air Pump Petroleum Fluids 1/2 inch Inlet/Outlet QBK-15

  • Air-Operated Double Diaphragm Pump 12GPM 1/2Inch Inlet And Outlet. The diaphragm pump features an externally serviceable air distribution system and all-bolted construction, with convenient operating, are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc.
  • A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-off valves) to pump a fluid..
  • Rugged construction - resists corrosion for reliable performance and long life.Bolted construction is designed for leak-free fluid handling..
  • Good abrasion resistance and heat resistance..
  • Easy access to ball checks and fluid caps for maintenance and repairs..
Check Stock

VEVOR Transmission Fluid Pump 2 Way Manual ATF Refill System Dispenser Oil and Liquid Extractor 10 Liter Large Capacity Automatic Transmission Fluid Pump Tool Set with 14 Pieces ATF Filler Adapters

  • 10L Large Capacity: Our pneumatic ATF pump has a 10L large capacity. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for oil replacement..
  • GREAT COMPATIBILITY: The fluid transfer pump comes with 14 common adapters that fit a variety of automobiles, including famous cars like BMW, Porsche, VW, Honda, Audi and many others..
  • Dual Control Mechanism: The fluid pump's dual control system with two-way valves (blue screw knob and flow direction valve) allows easy conversion between oil extracting and dispensing..
  • Ultra-secure Design: It includes a gauge for pressure monitoring and a releasing valve ( preset 43PSI ) to release pressure when it is overloading, this eliminates any potential threats at work..
  • Corrosion Resistance: Our transmission fluid pump is made of corrosion-resistance material, and it can withstand high pressure and also easy to wash..
Check Stock

Cozyel Air-Operated Diaphragm Pump Double Diaphragm Pump 1-1/2 inch Inlet & Outlet Air Diaphragm Pump Dual Diaphragm Air Pump Aluminum Alloy 44 GPM Max 115PSI QBK_40L

  • Air-Operated Double Diaphragm Pump 12GPM 1-1/2Inch Inlet And Outlet. The diaphragm pump features an externally serviceable air distribution system and all-bolted construction, with convenient operating, are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc..
  • A diaphragm pump (also known as a Membrane pump) is a positive displacement pump that uses a combination of the reciprocating action of a rubber, thermoplastic or teflon diaphragm and suitable valves on either side of the diaphragm (check valve, butterfly valves, flap valves, or any other form of shut-off valves) to pump a fluid..
  • Good abrasion resistance and heat resistance..
  • Rugged construction - resists corrosion for reliable performance and long life.Bolted construction is designed for leak-free fluid handling..
  • Easy access to ball checks and fluid caps for maintenance and repairs..
Check Stock

FXTUL Transmission Fluid Pump, 8L Pneumatic Transmission Oil Extractor Pump Set with 20 PCS Filling Adapters 2 Way Manual ATF Refill System Dispenser ATF Pump Compatible with BMW, Ford, Audi etc.

  • ...s like BMW, Porsche, VW, Honda, Audi, and many others. Simple push-on coupler design, You can flush and change the oil for your vehicles. All the adapters are installed in a toolbox, with clear model identification..
  • ✯✯✯【8L Capacity】Our pneumatic ATF pump has an 8L large capacity. 2M PU hose with one touch controller gun to connect with transmission filling adapter enables the steady operation of the flow volume and easy to do the dispensing jobs. Without the splashing during the work. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for oil replacement..
  • ✯✯✯【Two-way Control 】The transmission fluid transfer pump is designed with a two-way control system(blue screw knob and flow direction valve). The transmission fill kit has the function of draining and filling dual functions at the same time for transmission flushing and fluid changes for automatic transmission fluid (ATF). The two control valves allow you to change between oil extracting and oil dispensing more easily. Not applicable to volatile products such as gasoline and diesel..
  • ✯✯✯【Easy Operation】ATF transmission fluid filler features a hose with a swivel connector and a fluid-dispensing shut-off valve, makin....
Check Stock

Cardone 28-6653 Remanufactured Power Steering Control Valve

  • Units are supplied with all new O.E. style seals and O-rings to eliminate chance of leaks.
  • Each Control Valve is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure quiet, like-new performance.
  • CARDONE Remanufactured Power Steering Control Valves provide a reliable solution to replace your original defective unit..
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Check Stock

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

LUBEGARD M-V Automatic Transmission Oil Fluid Supplement Mercon-V Synthetic ATF 3 pack

  • Enhances DEXRON III/ MERCON ATF to perform like a MERCON V ATF, Eliminating the need for MERCON V ATF.
  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit, Dramatically reduces friction and tightens the shift cycle without loosing the friction.
  • Eliminates transmission fluid foaming and oxidation, Optimizes total transmission performance, Extends fluid life.
  • Eliminates clutch chatter and torque converter shudder, Eliminates objectionable noises during shifts, Softens and modifies harsh shifts.
  • Keeps valves and governors free and frees stuck valves in valve bodies, Superior seal compatibility and conditioning, Only protectant that increases the fluid's ability to transfer heat.
Check Stock

Lubegard 62005 M-V ATF Supplement 10 oz.

  • Enhances DEXRON III/ MERCON ATF to perform like a MERCON V ATF, Eliminating the need for MERCON V ATF.
  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit, Dramatically reduces friction and tightens the shift cycle....
  • Eliminates transmission fluid foaming and oxidation, Optimizes total transmission performance, Extends fluid life.
  • Eliminates clutch chatter and torque converter shudder, Eliminates objectionable noises during shifts, Softens and modifies harsh shifts.
  • Keeps valves and governors free and frees stuck valves in valve bodies, Superior seal compatibility and conditioning, Only protectant that increases....
Check Stock