Best Fluid Level Gauge Sight Glass

JohnDow Industries JDI-6EV 6 Gallon Fluid Evacuator

Thread Type : G3/4 (tested by G3/4 thread gauge exactly).
if you check by the caliper, the thread outside diameter approx 25.7mm.
Overall Size : 38 x 22mm/ 1.5" x 0.87" (D*T).
Package Content : 1 x Oil Level Sight Glass.
Notice Kindly: The male thread is G3/4 NOT G1, Please check the thread type and size carefully before you ordering.
If you need smaller size thread outside diameter about 3/4"（19.05mm), Pls choose our another model G1/2 products, the G1/2 male thread outside diameter is about 20.8mm(approx 3/4").

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Metal bowl with sight gauge for checking fluid level.
High-flow port for a flow rate up to 350 scfm.

In-light Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal....
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal position.
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

Bakelite handle on portafilter wooden handle, as shown, is no longer on this model..
Three red switches power, coffee brew, & boiler refill..
Brass eagle situated on dome with wings up..
Water level sight glass with pressure gauge..
Pump-operated to deliver water to grouphead and to refill boiler..

CARBONATION CAP – automatically regulates pressure to optimally carbonate beer. Choose desired carbonation level, from zero (off) up to 15 psi..
VESSEL – durable, double-wall Vacuum-insulated stainless steel..
PRESSURE GAUGE – easily read the pressure inside the growler..
DISPENSER TAP- easily pours beer any time, without removing cap. Plus taplock to prevent dispensing..
INTERCHANGEABLE TAP HANDLE – handle can be changed to personalize or represent your favorite Brewery..
SIGHT GLASS – shows contents of uKeg and how much is left..
Co2 CARTRIDGE – uses low cost, food-grade Co2 cartridges..

Industrial performance delivers maximum CFM @ 175 PSI.
provides enough power to operate more than one air tool or Device at one time.
Patented Pump design provides for a cooler Running Pump: industrial style air intake filter.
easily Accessible Oil level sight glass and Oil drain with 4” extension.
Electric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required.
Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps.
Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling.

Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..

Upgrade the new 5X Magnifier+558 Holographic Red Green dot sight Quick-Release Flip Mount Magnifier adds a 5x magnification . Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position..
5x magnifying glass + 558 red and green dot sight combination set, 5x magnifying glass effect than 3x clearer field of view.The lens are fully multi-coated maximizing resolution, light gathering capability, and color fidelity..
Quick Transitions-Simple, fast, and effective. The flip-to-side picatinny rail mount to allow you to shoot either 1X or 5X magnification by simply pushing the magnifier to the side..
Durable & Compatible: Tough & shockproof, the hard-coat-anodized machined-aluminum construction ensures durability. Made of high grade aluminum alloy which makes the red dot sight durable and light weight..
558 red dot +5x magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.Use lens cleaning fluid and optical tissue or cloth to clean lenses.We provide 7x24 hours service, the product is not satisfied. Full refund at any time..

3/4" Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo.
Brand new in line compressed air moisture filter, regulator, lubricator combo. This is a high quality unit that gives you the power to keep moisture out of your air lines, regulate air pressure, and lubricate your air lines all at once!.
This has 3/4" female NPT input as well as a 3/4" female NPT output port. This assembly has a 140 CFM max flow rate and comes equipped with a pressure gauge..
You can adjust the regulated pressure between 7 - 160 PSI with a 225PSI max PSI. The moisture filter features a 5 micron filter, 2.7 oz bowl capacity, as well as a visual sight glass to easily monitor the moisture level..