Best Fluke Process Calibrator 725

Fluke - 4022220 BP-7240 Li-Ion Battery Pack, For 75x Documenting Process Calibrator

• For the 75x documenting process calibrator.

OEM FLUKE 713-100G, Pressure Calibrator- 100 Psig. (1 Items)

Taylor Precision Products Pressure Calibrator with Carrying Case (0- to 160-Inch Water Pressure)

• Marked for 0- to 160-inches of water, this calibrator is capable of a wide range of pressure readings..
• The 1-3/4-inch dial is marked with clear white graphics on a black background for easy reading..
• A bright red-tipped pointer allows for at-a-glance measurements..
• The calibrator can be used as an alternative to a monometer for calibrating pressure instruments..
• This pressure calibrator comes with its own convenient carrying case for ease of storage and transport..

CEM BX-350 Portable Infrared Temperature Calibrators 122 to 662℉,50-350℃,Resolution 0.1℃/℉

• The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
• External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
• The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
• The calibrations can be done over a range of 50℃ to 350℃..
• Temperature display and stability resolution is 0.1 degree..

CEM BX-500 Portable IR Dry-Well Infrared Temperature Calibrators 122 to 932℉（50-500℃

• The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
• External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
• The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
• The calibrations can be done over a range of 50℃ to 500℃..
• Temperature display and stability resolution is 0.1 degree..

Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)

• Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
• | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
• Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
• Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
• Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..

Case Compatible with Fluke 117 115 116 114 113 Electricians True RMS Multimeter, Digital Multimeters Storage Organizer Bag Also Fits for Multi Meter Kit Accessories & Cables(Box Only)

• Tailor-made case for fluke multimeter: Multifunctional digital multimeter hard case design for fluke 117/ 115/ 116/ 114/ 113 electricians true RMS multimeters, meter case keeps for fluke meter storage and safe, easy to use and traveling. External dimension: 7.28x 4.13 x 2.95 inches. Internal dimension: 6.7 x 3.5 x 2.5 inches.
• Protective case for fluke-117 multimeter: High-quality multimeter case is made of durable eva material, which is splash-proof, shock-proof, moisture-proof and dust-proof. The well-made lining design protects your precious multimeter kit from scratches and abrasion. Prevent any damage caused by accidental collision or fall. Protection for fluke 117 case gives double protection for fluke multi meter..
• Large capacity for fluke test leads accessories: The compact meter carrying case with zipper mesh pocket, which makes full use of the internal space to facilitate storage of various for fluke test leads, batteries, thermo probe & other tools and mini accessories in one place, easy to find and use, no longer have to worry about confusion and loss. No matter where you work, you can take it with you on the go..
• Stable storage bag for fluke clamp meter : Internal elastic bandage design, protect for fluke multimetro firmly fixed in one ....

Aproca Hard Carry Travel Case for Fluke T5-1000 / T6-1000 / T6-600 / Fluke T5600 Electrical Voltage Continuity and Current Tester

• Fashionable appearance design,The case specially designed for fluke electrical tester fits perfectly.
• Hard shell suitable for fluke tester t6, the inside is made of high-quality velvet,The soft internal structure ensures the protection of fluke tester t5.
• This hard case for fluke voltage tester t5 is made of high quality EVA material, shockproof, dustproof and waterproof, protect your fluke voltage tester t6 cordless from impact and splash.
• The hard shell can ensure your electric tester fluke is safe and convenient, with light weight. The classic zipper design makes it easy to open and close..
• If there is a quality problem with the case, we provide a 100% money-back guarantee. This is a completely risk-free purchase, click the orange button to order immediately! (Note: Only case is sold, fluke electrical tester and accessories are not included).

CUB CADET KH-25-050-22-S1 Kohler Fuel Filter Z Force RZT LGT SLT SLTX LGTX GT LT

• Genuine OEM CUB CADET Part Number KH-25-050-22-S1 Replaces Prior MPN OCC-25-050-22 KH-25-050-22-S KH-25-050-08-S KH-25-050-03 2505022S1C.
• FITS MODELS: 1863, 1864, 2084, 2086, 2130, 2135, 2185, 2284, 365, 4814R, 4815F Pro Performer, FM-Z50, GT-1054, GT-1554, GTX-1054, i1042 & ZTT42, i1046, i1046 & ZTT46, i1050 & ZTT50, KT725-3013 Engine.
• ALSO FITS: KT725-3044 Engine, KT725-3046 Engine, KT725-3055 Engine, KT725-3060 Engine, KT725-3062 Engine, KT725-3068 Engine, KT725-3069 Engine, KT725-3075 Engine, KT725-3078 Engine, KT725-3079 Engine.

Fluke 117 SureGrip KIT 117 Electrician True RMS Multimeter with TLK-225 SureGrip Master Accessory Kit

• The fluke 116 digital multimeter features a built-in thermometer for HVAC applications.
• Fluke 116 digital multimeter features micro amps to test flame sensors.
• Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage.
• Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage.
• Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals.

Fluke 289/FVF/IR3000 289 Multimeter with Software and Wireless Connectivity Kit

• Fluke 289/FVF/IR3000 True-RMS Electronics Logging Digital Multimeter Combo Kit with Fluke Connect Compatibility and FlukeView Software.
• 289/FVF/IR3000 289 Multimeter with Software and Wireless Connectivity Kit.
• NEW - Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately)..
• NEW - Let your team see what you see in an instant with ShareLive video call (requires Fluke Connect mobile app and ir3000 FC wireless connector)..
• TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred..

Sliver: Music From The Motion Picture

• Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection.
• Temperature Compensation through Fluke Connect Measurements app.
• Fluke i400 AC Current Clamp Use with your Fluke 1587 FC to measure 1A AC to 400 A AC.

Taylor Precision Products Classic Series Large Dial Thermometer (Oven) - Set of 2

• Preferred by the process, offshore, power, pharmaceutical and chemical industries.
• Durable and reliable, with an all welded 303/304 stainless steel housing. Corrosion resistant to most chemicals. Hermetic seal, dustproof and leakproof IP65 & NEMA 4x.
• Adjustable all angle for maximum utility with installation, head can be rotated 360 degrees and stem can be position over 180 degrees. Heavy duty design.
• Accuracy +/-1% full span per ASME B40.3 Grade A. The calibration reset is located on the side of the case benefiting the calibrator, and requiring an Allen wrench to discourage inadvertent tampering.
• Manufactured in USA, with an 8 year warranty.