Categories

Best Fluke Punch Down Tool D914s

Cable Matters 110 Punch Down Tool with 110 Blade

  • Punch down tool cuts and terminates cable into a 110 patch panel or keystone jack.
  • Removable blade of impact style tool with twist and lock sockets can be stored in the tool body for transport.
  • Adjustable impact force settings (Lo/Hi) for cable termination into a jack, block, or patch panel with 110 IDC terminals.
  • Keystone jack compatible with Cat 3, Cat 5, Cat 5e, Cat 6, and Cat 6A network or voice cable.
  • Pair with a keystone jack punch down stand for a safe a secure installation.
  • 110 block tool uses spring-action for fast, low-effort cable seating and termination with reversible cut/punch blade.
Check Stock

ABN Spring Loaded Center Punch, Automatic Center Punch Tool – Auto Center Punch, Awl Punch Hole Punch Tool, 5in

  • EASY TO USE SPRING PUNCH TOOL: Put away your hammer, pilot, and center drill and instead use the ABN Center Punch Spring Loaded Nail Setter Tool to make or mark the center of a hole you wish to create.
  • Press down on the nail set tool until the tip of the hammer nail fully retracts into the handle, the spring-loaded trigger will release, and the blade of the metal punch tool will mark the workpiece.
  • FITS YOUR PROJECT: Nail spring tool marks your workpiece with a dimple to give you a starting point that prevents screws and drills from wandering.
  • Use this automatic center punch for metal, wood, glass, canvas, plastic, and leather materials.
  • Use this spring loaded center punch glass break window breaker to enter a car in emergencies or use as a spring loaded awl for your belts or purses.
  • ADJUST FOR ACCURACY: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
  • Increase and decreased the stroke for higher or lower impact by tightening and loosening the adjustable cap on the nail set punch nail hammer tool.
  • BUILT TO LAST: Center hole punch shank body is constructed from chrome-plated steel for maximum strength and longevity that allows for high impact force and resists corrosion.
Check Stock

Foto4easy Network Wire Punch Down Impact Tool for IBDN Wiring Cable Rack 14cm Nortel Type

  • This punch down tool is the only thing you need to add, change or remove wires from connections..
  • Combination impact punch down and torque tool function..
  • connected in a gas-tight connection in a single action..
  • This Impact & Punch Down Tools is used for inserting wires into sockets, patch panels or outlets. Blades precisely trim and insert wire..
Check Stock

Fowler 52-500-290-0, Super Heavy Duty Automatic Center Punch

  • Marking and Pre-Drilling Tool: The automatic center punch, with its conical tip, is used to make indentations that allows you to safely drill holes at the same location without slipping.
  • Steel Construction: This metal punch is made of hardened tool steel and has a knurled finger grip for ease of handling.
  • the adjustable cap adjusts for heavy or light pressure markings make it less likely to damage softer materials.
  • No Hammer Needed: This adjustable, spring loaded punch has a mechanism that automatically strikes a blow when downward pressure is applied, without the need for a hammer.
  • Dimensions: This center punch tool is 6" in length and has a diameter of 5/8".
  • Removable Point: This auto center punch features a point that is easily removed when needed to be sharpened or replaced.
  • uses pressure to mark a spot by screwing the cap down for heavy and upward for lighter markings.
Check Stock

LINKOMM Keystone Jack Punch-Down Handheld Termination Palm Holder Stand (Black)

  • Safe and reliable punch-down keystone jack installing holder.
  • Protect your hands from sharp impact punch-down tool.
  • Place the keystone jack into the holder and stably punch down the wires.
  • A for 180-degree wiring jack, B for 90-degree jack, and C for Australian type jack.
Check Stock

InstallerParts Replacement Blade for 110 Type Punch Down Tool – Black – Perfect as a Replacement Blade or Spare

  • Replacement Blade For An Impact Punch Down Tool.
  • The Blade For Punch Down Tools Is Durable And Made To Last.
  • Fits All Standard Punch Down And Impact Tools.
  • Perfect For Everyday Use, As A Spare, Or Replacement.
Check Stock

Case Compatible with Fluke 117 115 116 114 113 Electricians True RMS Multimeter, Digital Multimeters Storage Organizer Bag Also Fits for Multi Meter Kit Accessories & Cables(Box Only)

  • Tailor-made case for fluke multimeter: Multifunctional digital multimeter hard case design for fluke 117/ 115/ 116/ 114/ 113 electricians true RMS multimeters, meter case keeps for fluke meter storage and safe, easy to use and traveling. External dimension: 7.28x 4.13 x 2.95 inches. Internal dimension: 6.7 x 3.5 x 2.5 inches.
  • Protective case for fluke-117 multimeter: High-quality multimeter case is made of durable eva material, which is splash-proof, shock-proof, moisture-proof and dust-proof. The well-made lining design protects your precious multimeter kit from scratches and abrasion. Prevent any damage caused by accidental collision or fall. Protection for fluke 117 case gives double protection for fluke multi meter..
  • Large capacity for fluke test leads accessories: The compact meter carrying case with zipper mesh pocket, which makes full use of the internal space to facilitate storage of various for fluke test leads, batteries, thermo probe & other tools and mini accessories in one place, easy to find and use, no longer have to worry about confusion and loss. No matter where you work, you can take it with you on the go..
  • Stable storage bag for fluke clamp meter : Internal elastic bandage design, protect for fluke multimetro firmly fixed in one ....
Check Stock

NECABLES Keystone Punch Down Stand and Plastic Punch Down Tool with Stripper

  • ★ Punch down stand provides a convenient base for terminating your keystone jacks.
  • ★ Compatible with most regular keystone jacks, RJ11 / RJ12 / RJ45, 90 degree or 180 degree.
  • ★ Engineering plastic housing makes it a hard surface and not easy to be scraped or cracked.
  • ★ Small impact tool with sharp blade is used to punch down wires into 110 blocks.
  • ★ It also can be used as a stripping tool, an ideal stripper for CAT5E,CAT6 and CAT6A ethernet cables.
Check Stock

1587KIT/62MAX+ FC 2-in-1 Adv Elec Tr Ins Mult Kit W/62Max+ I400

  • Fluke 1587FC Insulation Multimeter is the single tool that allows users to perform advanced insulation testing for preventive and PdM tasks.
  • Fluke i400 Clamp meter Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.
  • Fluke 62 MAX+ Infrared Thermometer -30°C to 650°C (-22°F to 1202°F).
Check Stock

trueCABLE Keystone Jack Punch Down Stand, 90 Degree Handheld Termination Aid, truePUCK

  • DURABLE. High impact ABS plastic construction provides a solid base for terminating..
  • SAFE. Protect yourself from cuts when using your impact punch down tool. Safer for your walls too, allowing you to hold the jack in your palm as opposed to bracing it on a wall..
  • CONVENIENT. Ergonomic design allows a firm grip with maximum comfort..
  • COMPATIBILITY. Designed for use with 90-degree trueCABLE unshielded punch down keystone jacks. Pairs perfectly with our trueIMPACT tool (B088N5MQYH)..
  • FOREVER WARRANTY. Break it? We’ll replace it, no questions asked. CE, Reach, and RoHS compliant..
Check Stock

Punch Down Tool with 110/88 Blade & Network Wire Stripper, Multifunction Hook Tool for Telephone Impact Terminal Insertion and cat6a/cat6/cat5e/cat5 Cable

  • 【Superior Performance】Interchangeable and reversible blades, blade storage hole, also with Hook Line Knife & Flathead Screwdriver. Professional punch down tool inserts and cuts terminations in one operation..
  • 【Universal Design】Precise blades are between 110 and 88. Rotate the blade 90 degrees clockwise to fix it and 90 degrees counterclockwise to release it. Blade can be storage in the end of the handle makes the storage more convenient and safe..
  • 【Ergonomic Design】Adjustable impact-force settings for various cable termination applications and blade release setting for fixing or releasing the blade. Hook line knife to pull the cable from module. Flathead screwdriver to take the module out of the patch panel..
  • 【Convenient and Fast】Durable punch down tool, one simple operation for Cat6e/Cat6/Cat5e/Cat5 network cable to keystone jacks and phone installation. The extra wire stripper makes wire cutting more convenient..
  • Wire Stripper x1. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support..
Check Stock

Punch Down Impact Tool with 110 and 66 Blades, Network Wire Cable Cat6/Cat5e Telephone Impact Terminal Insertion Tools

  • WIDE USAGE: Inserts and cuts terminations in one simple operation for Cat6a /Cat6 /Cat5e /Cat5 Network Cable. Install Wires Easily into the Telephone Socket, CAT5e Faceplate or Patch Panel..
  • PRECISE BLADES: Precise blades are interchangeable and reversible between 110 and 66 standards, includes cutting and non-cutting sides (cut/punch)..
  • ERGONOMIC DESIGN: Comfort grip that is easy to handle. Adjustable impact-force settings (Lo/Hi) for various cable termination applications..
  • TORQUE CAPABILITY: Professional-Grade Impact tool with twist and lock sockets accommodates most blades for punch-down tools..
  • TORQUE CAPABILITY: Professional-Grade Impact tool with twist and lock sockets accommodates most blades for punch-down tools. The extra wire stripper makes wire cutting more convenient. Suitabale for telephone and computer network installation and maintenance..
Check Stock

Fluke FLK-TIS20+ 9HZ, Thermal Imager

  • Fluke IR-Fusion Simply slide your finger across the screen to adjust the level of infrared that you need..
  • Battery lifeOver 10 hours of battery life..
  • Rugged reliable tool Engineered to withstand a 2 meter drop, water and dust resistant (IP54)..
  • Fluke Connect Asset TaggingScan a QR code and automatically sort your thermal images by asset..
Check Stock