Categories

Best Flush Cut Saws

Japanese Hand Saw Pull Saw Flush Cut Saw Razor Fine Teeth Saw With 8 Inch（200MM）SK-5 Steel Blade For Woodworking

  • ...n the handle，which are convenient to wear and hang..
  • 【Easy to replace the blade】：We provide tooth guard and saw sleeve, Easily replace the blade without tools.And we also spare pull saw blade is provided, give you double use protection..
  • 【Various scene switching use】：This Japanese pull saw is suited for flush-cutting，cross-cutting，rip-cutting，deep-cutting and general purpose,they cut very rapidly and leave an excellent finish.380mm compact body is ideal for the works in confined spaces.In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner..
Check Stock

Jones Stephens S49005 E-Z Stroke Pipe Saw 8” Pipe Saw

  • Hand Saw: This E-Z Stroke Pipe Saw is a convenient, lightweight hand saw with a comfortable ergonomic handle. It can easily be used to cut plastic,....
  • Pull-Stroke Saw: Jones Stephens’ E-Z Stroke Pipe Saw is one of the most convenient and easy-to-use cutting saws. With razor sharp teeth, the....
  • Flexible Blade: The saw features a highly flexible blade that allows for flush cutting without marring adjacent surfaces..
  • Razor Sharp Teeth: The tri-edge ground teeth cut through material like a knife, which makes this saw the go-to for all your cutting needs..
  • Replaceable Blade: If you need a smaller blade or your blade is dull or damaged, the orange handle accepts all Jones Stephens E-Z Stroke Saw blades.....
Check Stock

Festool Plunge Cut Track Saw TS 55 FEQ-F Plus FS w/55" Guide Rail

  • The Festool TS 55 is not your standard circular saw. The saw rides on a guide rail, or track, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, miter saws and panel saws. The TS 55 track saw delivers precise, splinter free, glue ready cuts and only takes seconds to setup. Breaking down sheet goods? Cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment..
  • The TS 55 track saw works seamlessly with it's integrated rail, available in various sizes. Utilize the rail and saw with or without a table or work surface. The track saws flat housing allows for flush cutting..
  • Concentrated torque and up to twice as fast work progress with an increased saw blade service life..
  • Virtually splinter-free on both sides thanks to attachable splinter guard..
  • The cutting edge from 90° to 47° remains unchanged even when the saw bevels..
Check Stock

SUIZAN Japanese Folding Dozuki Dovetail Pull Saw 9.5 Inch, Hand Saw for Woodworking

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
  • For Cross Cut, Blade Length: 9.5"(240mm), Blade Thickness: 0.012"(0.3mm), TPI: 25(1.0mm), Kerf Width: 0.....
Check Stock

SUIZAN Japanese Pull Saw Hand Saw 9.5 Inch Ryoba Double Edge Flush Cut Saw Woodworking tools

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
  • Since each handle is individually wrapped by hand by craftspeople, its appearance may vary from one to another. Cracks may occur during the manufacturing process. It is not a defect..
Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

Dremel US600-01 Ultra-Saw 4-Inch Wood Flush Cut Wheel White

  • Premium Carbide high-quality engineered flush cutting wheel for cutting a variety of wood materials including soft and hard wood, plywood, composites,....
  • Dome-shaped wheel perfect for 3/4-Inch flush cuts..
  • Uses include cutting baseboard for flooring installation..
  • Compatible with all Dremel corded and cordless Ultra-Saws..
Check Stock

CMT 251.042.10 ITK XTreme General Purpose Saw Blade, 10-Inch x 40 Teeth ATB Grind with 5/8-Inch Bore

  • For fast crosscuts on wood and plywood. Good rip cut on wood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 251.045.12 ITK General Purpose Saw Blade, 12-Inch x 45 Teeth 1FTG+2ATB Grind with 1-Inch Bore

  • For fast crosscuts on wood and plywood. Good rip cut on wood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Knew Concepts 5' Woodworker Fret Saw with Screw Tension

  • Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails..
  • These saws are made from 1/8" thick milled aluminum with a red anodized finish..
  • The ultra-lightweight truss-style frame weighing just 5.1 ounces is quite rigid allowing the blade to be tensioned to a full 40 pounds minimizing blade breakage and defection and improving overall cutting accuracy.
  • The set of knurled blade clamps knobs securely grip the blade and prevent slippage. Blade tension is easily adjusted via a large knurled screw tension knob. Opening is 4-3/4", depth of cut is 5" and overall length is 13".
  • Kit includes one 15 TPI #7 fret saw blade.
Check Stock

Benchmark Abrasives 14" x 1/8" x 1" Aluminum Oxide Type 1 Chop Saw Blade Cutting Wheel for High-Speed Power Saws, Max. RPM 4400, Precise Cutting of Metal Steel Drywall - 10 Pack

  • Benchmark Abrasives 14" x 1/8" x 1" chop saw cut-off wheels are ideal for cutting all ferrous metal, iron, steel, tube, pipe, and light gauge material like drywall studs, etc..
  • The cut-off wheels are manufactured using aluminum oxide material which has a grainy texture that is good enough to cut metals with ultimate precision and perfection..
  • Designed to meet industrial standards, our cut-off wheels are recommended to be used with stationary saws, low horsepower saws, portable saws, and electric chop saws that are made for 14” sized wheels..
  • Efficient chop saw blades are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives 14" x 3/32" x 1" Aluminum Oxide Type 1 Chop Saw Blade Cutting Wheel for High-Speed Power Saws, Max. RPM 4400, Precise Cutting of Metal Steel Drywall - 10 Pack

  • Benchmark Abrasives 14" x 3/32" x 1" chop saw cut-off wheels are ideal for cutting all ferrous metal, iron, steel, tube, pipe, and light gauge material like drywall studs, etc..
  • The cut-off wheels are manufactured using aluminum oxide material which has a grainy texture that is good enough to cut metals with ultimate precision and perfection..
  • Designed to meet industrial standards, our cut-off wheels are recommended to be used with stationary saws, low horsepower saws, portable saws, and electric chop saws that are made for 14” sized wheels..
  • Efficient chop saw blades are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

KNIPEX Tools - Diagonal Flush Cutter for Plastics, 45 Degree Angle (7211160) , Red

  • Diagonal Pliers for Flush Cut Plastics 45 Angled.
Check Stock