Categories

Best Flush Handle

Tibres - 7 Sliding Barn Door Handle - Flush Pull Handle for Sliding Doors Cabinets Closet and Drawers - Black

  • RELIABILITY AND DURABILITY - The door pull handle is constructed of heavy duty material with a satin black finish (anti-corrosion powder coat)..
  • MULTIFUNCTIONAL USE - The flush door handle can be used on pocket doors, sliding doors, sliding barn doors, or cabinet doors. Suitable for both....
  • UNIVERSAL DESIGN - With this finger pull handle, smooth surfaces gain even more elegance. The sliding door pull handle has a black finish..
  • EASY TO INSTALL - The pull door handle may be directly surface-mounted to the door. The flush pull is designed in such a way that there is no need to....
  • MOUNTING HARDWARE INCLUDED - The set includes black flush handle and screws for attachment. The barn door pull handle installs with the use of two....
Check Stock

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • ...AIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, White Finish Toilet Handle

  • Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
  • Easy to install, The universal design fits most side-mount applications, Durable construction.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

White Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

  • Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a White finish Handle with Lock Nut, Pre-Drilled 8-Inch Rod.
  • The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed. Packaging design may vary..
Check Stock

Qualihome Universal Side Mount Toilet Handle Tank Flush Lever Replacement Handle, Chrome Finish Toilet Handle

  • Qualihome Side Mount Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Chrome finish Handle with PLASTIC Lock Nut and rubber washer, Pre-Drilled 8-Inch Rod.
  • Easy to install, The universal design fits most side-mount applications, Durable construction.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • ...PAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
Check Stock

2 Pack Universal Side Mount Toilet Handle Angle-Mount Adjustable Trip Lever Tank Flush Lever Replacement Handle with 2 Pieces Stainless Steel Flapper Chains for Most Side Mount Toilets-Chrome Finish

  • 1.【Side Mount Brass Toilet Tank Lever】This toilet tank lever handle is compatible with most common toilets with a side mount or angle mount flush lever. Three holes at the end of the lever, which make it flexible to adjust the length according your toilet tank..
  • 2.【Size Details】The flush handle lever measures about 8 inch/20cm in length, and 2.56 inch/ 6.5cm in width. Proper size for most Side-mount and Angle-mount flush toilets. Fits tank hole diameter 0.62 in. to 0.67 in..
  • 3.【High-quality Brass Material and Corrosion Resistant Finish】Made of brass for enhanced durability. Replace your toilet handle with this universal flush lever. This lever comes in a classic chrome finish to compliment your toilet..
  • 4.【Easy to Install】It's easy to install and includes the chrome finish handle, aluminum arm, white plastic spud and nut. Passes 50,000 times flush test. Fits standard front mount..
  • 5.【Fit for Most Common but Not All Toilet Tank】Note that side-mount toilet handles type is fit for most toilet tank, but does not mean that will fit for any side-mount or angel-mount handle. When replacing a side-mount or angle mount handle, measure the lever before place the order..
Check Stock

2 Pack Toilet Flush Lever Handle Compatible with TOTO Toilet Tank for TOTOTHU068#CP Trip Lever for St743S, Chrome

  • 【Metal Plating Wrench and Copper Lever】Stylish Chrome Finish is sure to complement your existing bathroom decoration. Toilet tank lever is highly durable handle arm construction..
  • 【Durable Metal Handle】Toiler trip lever has durable metal construction handle and equipped with corrosion resistant finish..
  • 【Side Mount Toilet Flush Length】10.6 inch maximum flush arm length and single action flush..
  • 【Easy to Install】Toilet tank lever side mount, without any tool, take seconds..
  • 【Compatibility】Flush Tank lever replacement compatible with TOTO Toilets THU068#CP trip lvr for St406, St707, St454E, St743E, St706, St743S..
Check Stock

Brushed Nickel Toilet Tank Flush Lever Handle, Universal Front Mount with Nut Lock, Fits Most Toilets

  • Toilet tank lever handle can add a new stylish touch to your bathroom and will help your toilet, It features a Satin Nickel finish Handle with Lock Nut, Pre-Drilled 8-Inch RodThe universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • The universal design fits most front-mount applications, Fits Most Toilets, Durable construction, Easy to install.
  • Please note: FLUSH LEVER LOCKNUTS HAVE A REVERSED THREAD..
  • Instructions: 1. Remove chain or strap from existing flush lever. 2. Remove old flush lever. Note: the threads loosen in the opposite direction. 3. Insert new flush lever into toilet..
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten. 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as needed..
Check Stock

3 Pack - Brushed Nickel Recessed Sliding Door Handle Covered Flush Pull, Rectangle Silver Tone Push Handle, 2.8-Inch Length

  • MATERIAL: Rectangular Flush Pull Handle is made of zinc alloy material, electroplated finish.
  • HANDLE SIZE: Overall Length: 2.8″ (72mm), Width: 1.5″ (38mm), Height: 0.23″ (6mm), Weight: 0.11 lb (50g).
  • FLUSH MOUNTED: Elegant embedded hidden design. Excellent quality door handle, practical and durable.
  • QUANTITY: 6 x flat head self-tapping screw and 3 x Flush Pulls, Make the handle easy to install when it arrives.
  • APPLY TO: It is suitable for cupboard, drawer, cabinet, sliding door etc, is an ideal replacement.
Check Stock

Aqua-Magic V RV Toilet Hand Flush / High Profile / White - Thetford 31667

  • [VERSATILITY]: Aqua-Magic V is the RV toilet with a classic style, suited for all recreational vehicles.
  • [FUNCTIONALITY]: The toilet has a single-handle flush system - press it halfway to add water to the bowl and all the way to flush - and 100% bowl coverage flush.
  • [UTILITY]: Aqua-Magic V has a textured lid which sheds water and resists scuffs, offering the comfort and feeling of a household toilet.
  • [CONVENIENCE]: Lightweight - 9.4 lbs - plastic RV toilet, easy to install, use and service.
  • [INCLUDED]: To further reduce the water consumption, the toilet can be fitted with a hand sprayer, perfect for a hand rinse wash down.
  • half way adds water, full activation provides a full-bowl coverage flush.
  • High profile offers taller seating height for maximum comfort.
  • Textured lid sheds water, resists scuffs.
Check Stock

Universal Toilet Trip Levers Flush Lever Handle for St701Cst854884, St701, St743S - Chrome Compatible with TOTOTHU068# THU004#

  • 1.Toilet handle can add a new stylish touch to your bathroom and will help your toilet, It features a Chrome finish Handle with Lock Nut, Pre-Drilled 8-Inch Rod.
  • 2.The universal design fits most side-mount applications, Durable construction, Easy to install.
  • 3.Instructions: ① Remove chain or strap from existing flush lever. ② Remove old flush lever. Note: the threads loosen in the opposite direction. ③ Insert new flush lever into toilet.
  • 4. Attach locknut to flush lever and tighten it down to toilet tank, remember the reversed threads. Do not over tighten.
  • 5. Attach chain or strap of toilet flapper ball to new flush lever and adjust as neede.
Check Stock

Toilet Economizer Dragon de Agua | 40% EcoFriendly Water Saver

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS..
  • FLUSH VALVE REPLACeMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank.
  • the Dual Flush Converter is a replacement to the existing flapper.
  • slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Check Stock