SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

HQMaster CNC End Mill 1 8 Router Bits Spiral Milling Cutter Tungsten Steel Wood Cutting Tool Set Acrylic MDF PVC Density Board Hardwood Plywood 10 Pack

  • Range of processing ---- for carving/cutting/engraving/milling in materials like density board, wood, plywood, rosewood, acrylic, PVC, MDF etc..
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to break.
  • it is smokeless and burr-free while processing.
  • Perfect cutting ---- the design of 4 flute, larger spiral chip space and mirror polishing of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
  • Dimensions ---- diameter: 1/8" (3.175mm).
  • Package contents ---- 10pcs tungsten steel upcut bits assorted in a plastic storage case.
Check Stock

OSCARBIDE 1/8\Shank Ball Nose Carbide End Mills CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Acrylic Wood PVC Aluminum 10pcs

  • Ball Noze type,1/8" Shank X 1/8"Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm.
  • Carbide Ball End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
  • Due to the Great hardness of solid Tungsten carbide Material, it can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB.
  • Double Flute Spiral Design Improved the chip removal efficiency, surface mirror finish prevent chips from sticking to bits, which makes cutting more smooth.
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

HQMaster CNC Router Bits 10 Pack 1/8” Shank Spiral Upcut Router Bit 1 Flute End Mill Set Milling Cutter 2mm Cutting Single Flute Tungsten Steel Engraving Tool 8mm CEL 38.5mm OAL for MDF Acrylic PVC

  • Range of processing ---- for cutting/engraving/carving/drilling/sculpturing/milling in materials like MDF, acrylic, density board, solid wood, wood,....
  • High efficiency ---- these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to....
  • Perfect cutting ---- the design of single flute, larger spiral chip space and mirror polishing of CNC Router Bit makes non-stick crumbs, smooth....
  • Dimensions ---- shank diameter (SD): 1/8" (3.175mm).
  • cutting edge length (CEL)/flute length: 8mm.
  • Package contents ---- 10pcs tungsten steel bits assorted in a plastic storage case.
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock