3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No
- Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
- Each soldering flux pen measures approx. 5.6 inches in length.
- Safe to use: these flux pens are made of quality material, no leak and safe to use.
- Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
- No residue will interfere with electrical testing.
- Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
- It allows controlled application of flux, thereby removing dirt in the flux bottle.
- Pen tip of 10 ml with practical designed felt tip.
- The solid content is low and there is almost no residue.
- Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
- It is lightweight and would not occupy too much space, suitable pocket size to carry.
- How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
- After that, you can use the alcohol to clean the pen.
Check Stock
BEEYUIHF Rosin Soldering Paste Flux, Solder Paste Flux, Flux for Soldering, For SMD PCB Soldering & Repair, Electrical Soldering Rosin Flux (1.76oz/50g)
- BEEYUIHF #7150 Soldering Paste Net weight: (1.76oz/50g) Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin Soldering Paste,High Purity,Good helper for repairing and welding..
- Soldering Flux Paste Feature: No corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
- Flux for soldering application: Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance.Have strong oxide removal effect to gold-copper alloy substrate and wire..
- #7150 paste flux features: Lead-free, halogen-free, acid-free, no cleaning, less residue, easy to tin, less smoke, help soldering firm, make soldering fluidity better, slightly yellow paste..
- Solder Flux also a good helper for maintenance enginee. Rosin soldering flux paste metal can packaging, High-quality aluminum box packaging, not easy to break..
Check StockSolder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics
- [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
- [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
- [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
- [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)
- Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
- High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
- Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
- Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock
BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free
- 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
- 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
- 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock
10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance
- Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
- Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
- Please check the size carefully before purchasing.
- Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
- And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
- Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
- Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
- Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock5 Pieces No Clean Solder Flux Pen 5.6 Inch Length for Electronics Tabbing Wire Soldering Welding Repair
- What can you get: the package includes 5 pieces of no clean solder flux pens, enough quantity providing you a wide choice for daily life use and replace.
- Proper size: the soldering no clean flux pen measure approx. 14.3 cm/ 5.6 inches in length, please check the size carefully before purchasing.
- Reliable and quality material: the liquid soldering pen is made of reliable materials and no leak and safe design for protecting the flux, keep you from touching the organic solvents.
- Wide applications: these flux pens can be applied for laboratory, computer, telecommunications, home repairs, bringing a lot of convenience to your work.
- Simple operation: you only need to press the pen tip 1-2 times to release the liquid, and after use, the flux pen can be cleaned with alcohol.
Check StockStreamlight 61301 Argo C4 LED Head Mount Headlamp, Yellow - 150 Lumens
- Argo LED Headlamp, Uses 3 AAA-Cell Batteries.
- C4 LED Technology, Impervious to Shock With A 50,000 Hour Lifetime.
- Run time: 150 lumens for 3 hours, 100 lumens for 4-1/2- hours, 45 lumens for 30 hours.
- 1 watt super high flux, 50,000 hour Luxeon LED.
- 2-1/3-inches high by 3 inches wide by 2-1/4-inches deep.
Check Stock
Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire
- 【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
- 【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
- 【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
- 【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
- 【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..
Check StockTOOLIOM Aluminum MIG Welder 250A 110V/220V Dual Voltage MIG/Lift TIG/Stick 3 in 1 Welding Machine
- Multi-functions in one machine, suitable for Gas MIG/Flux MIG/Stick/ Lift TIG..
- Can weld aluminum ,compatible with a spool gun or MIG torch with graphite wire feed tube..
- MIG synergistic setting & MIG manual setting, good choice for both novice and professional..
- Can be used with various welding wire, .040" solid/flux/aluminum wire,035" solid/flux wire,030"solid/flux wire,024" solid wire..
- Dual voltage input design: Welding machine can be plugged into 110/220V dual voltage (Automatic fitting)..
Check StockPHOTOBIO LGBQM2 Advanced Quantum PAR Meter Micromols
- The Phantom PHOTOBIO Advanced Quantum PAR Meter provides accurate and cost-effective measurement for any light source used in horticultural....
- The Advanced Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm..
- There is a positive proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis, important....
- Complete with compact main unit, remote sensor, two connection cables (short-coiled & 12’ long-straight), AAA batteries and protective carrying....
- onvenience of storing up to 99 measurements for easy reference while adjusting light fixture height, dimmer setting and other environmental changes....
Check StockWeller D650PK Industrial Soldering Gun Kit & Soldering Accessory Kit
- Leading manufacturer of high-quality tools.
- Made to withstand even the most demanding jobs.
- International renown for our diverse range of products.
- 5 Piece Accessory Kit: Kit includes - 1 oz. of rosin flux paste, Lead Free Solder SN99.25Cu 0.75 dia. 0.8mm (0.031”) x 12.2g (0.43oz), 1 flux brush and 1 brass wire cleaner with silicone holder to ensure effective soldering joints and extend life of soldering tip.
- Improve Solder Joints: Apply lead free and RoHS compliant rosin flux paste with flux brush to improve wetting and flow of solder for easier soldering and improved solder joints.
- Dry Tip Cleaning: Maintain tip cleaning and effectively remove residual solder from your soldering tools without damaging your tips with Weller's Soldering Brass Tip Cleaner with Silicone Holder.
Check StockCanfield 50/50 solder for stained glass 1 Lb Spool
- Non-corrosive non-conductive flux residue.
- Melting point: 183 °c - 191 °c/ 361 °f - 376 °f.
Check Stock
