Categories

Best Flux Capacitor

Doc Brown Back to The Future Flux Capacitor 1.21 Jigawatt Tin Sign 16x12 Inch

  • CHOOSE THE SIZE of your Flux Capacitor Print sticker from the options menu.
  • MADE IN THE UK from high quality Oracal 651 Glossy Vinyl, Comes with clear transfer tape already attached.
  • SUITABLE FOR use on smooth, clean surfaces such as painted walls, plastic, metal, PVC, Glass, Fibreglass.
  • WATERPROOF allows for use either indoors or outdoors.
  • RECOMMENDED USE: Car Sticker, Bumper Sticker, Laptop Sticker, Tablet Sticker, Gift for Back to the Future fan, Wall Sticker Decal.
Check Stock

New SKAR Audio VX35-ST 3.5-INCH 500 WATT Titanium Bullet Super TWEETERS - Pair

  • ...werful ferrite magnets allow them to deliver unparalleled loudness and sound clarity..
  • Sold as a set of 2, these bullet style super tweeters are so powerful you might think you're in a concert hall when hearing them for the first time. In addition, each tweeter's positive connection terminal features an inline noise capacitor that eliminates out all low end frequencies that might otherwise harm the tweeters. Frequency Response: 2.2 kHz - 20 kHz, sensitivity: 101 dB, Impedance: 4 ohms. Sold as a set of 2 tweeters.
  • Product Specifications Skar Audio VX35-ST 3.5-inch High Compression Titanium Bullet Super Tweeters Max Power Rating: 500 Watts (Pair) | 250 Watts (Each) RMS Power Rating: 300 Watts (Pair) | 150 Watts (Each) Die-Cast Aluminum Basket High Flux Ferrite Magnet.
  • 1" High Temperature Kapton Voice Coil Impedance: 4 Ohms In-line Capacitor Crossover (Attached to the positive terminal of each tweeter) Frequency Response: 2.2 kHz - 20 kHz Sensitivity: 101 dB Sold as a Set of 2 Bullet Tweeters Warning: Extremely Loud.
Check Stock

DS18 PRO-DKN25 Neodymium Driver with Aluminum Horn - 1\

  • 1" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, mylar capacitor crossover, and an aluminum horn included make these the best drivers available..
  • RELIABLE POWER - At 120W Max and 60W RMS the PRO-DKN25 compression (horn) driver boasts out-of-this-world power handling for a Pro audio speaker at a value price point..
  • TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
  • HORN INCLUDED - DS18 has gone to great lengths to make sure this is compression driver has everything you would need by including an aluminum horn with these PRO line drivers.
  • DURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment..
Check Stock

LEGO 10300 Back to The Future Time Machine，Building 1 of 3 Versions of The time-Traveling car（1872 Pieces）

  • A project worth making time for – This Back to the Future car building set（10300） is designed especially for adults looking for their next immersive project.
  • Build 1 of 3 options – Version 1 includes a lightning rod and plutonium chamber, version 2 features Mr. Fusion and hover conversion, and version 3 has whitewall tires and a circuit board.
  • Opening gull doors – Just like in the movies, this model version of the Back to the Future car includes the famous opening gull doors.
  • Flight mode – The car’s tires fold down for flight mode. Other details include the light-up flux capacitor, printed dashboard dates and opening hood.
  • Includes 2 minifigures, plus accessories – Spot details from the movies, like Marty’s hoverboard and the OUTATIME license plate. Comes with Doc and Marty McFly minifigures to add to your display.
Check Stock

Back to Future Delorean Building Kit, BTTF Time Machine Car Building Set, Classic '80s Movie Collectibles, Great Gifts and Toys for Fans (211 Pieces)

  • [Time Machine] The DeLorean time machine is a time travel device made by retrofitting a DMC DeLorean vehicle with a flux capacitor. The car requires 1.21 gigawatts of power and needs to travel 88 miles per hour (142 km/h) to initiate time travel..
  • [Fun Building] Building kit of classic '80s TV movie Back to Future. Build your very own iconic Delorean time machine and enjoy the fun of it..
  • [Product Dimension] Built with 211 pieces and measures about 2.0 inches high, 5.6 inches long and 2.7 inches wide..
  • [Openable Doors] Features opening doors. You can open the gull-wing doors, just like the real car..
  • [Great Gift for Fans] A unique gift for the fans of the classic movie. Including full instructions, easy to follow and build. Compatible with all major building block brands..
Check Stock

CAR ROVER High Power H11 LED Headlight Bulb, Direct Fit 120W 20000LM Extremely Bright 6500K H8 H9 Conversion Kit, Pack of 2

  • ...d position as the H11 halogen bulb, produce the same light focus, bring you the perfect light shape and distance..
  • EASY TO INSTALL: All-in-one compact design, PLUG-N-PLAY, can be installed in 15 minutes on your own. Compatible with most factory original plugs, No relay, No capacitor, No extra wiring, more convenient installation method..
  • STRONG HEAT DISSIPATION: 40% cooler than others, whole aluminum housing 10,000 RPM powerful Turbo cooling fan to ensures your H11 LED headlight conversion kit last a longer life. Built-in EMC system, these compact auto led kit can reduce radio interference issues..
  • LONGER LIFESPAN: Last up to 30,000 hours. IP68 water resistant, works underwater! Rainproof driver, housing, and fan works even in extreme situations..
Check Stock

CAR ROVER High Power H1 LED Headlight Bulb, Direct Fit 120W 20000LM Extremely Bright 6500K Conversion Kit, Pack of 2

  • EXTREMELY BRIGHT: H1 LED headlight bulbs with 120W per pair. Cool White 6500K. High luminous efficacy Flux up to 20000LM per pair. 300% brighter than your stock halogen bulbs. PERFECT BEAM PATTERN without dark spots or shadowed areas, don't dazzle oncoming traffic, No glare to other drivers..
  • 1:1 RATIO DESIGN: 1:1 halogen filament design, apply the same length and position as the halogen bulb, produce the same light focus, bring you the perfect light shape and distance. IP68 water resistant and designed for use in heavy rains, rainproof housing and fan, can work even in extreme situations..
  • EASY TO INSTALL: All-in-one compact design, PLUG-N-PLAY, can be installed in 15 minutes on your own. Compatible with most factory original plugs, No relay, No capacitor, No extra wiring, more convenient installation method..
  • STRONG HEAT DISSIPATION: 40% cooler than others, whole aluminum housing 10,000 RPM powerful Turbo cooling fan to ensures your H1 LED bulb conversion kit over 30,000 hours of brilliant continuous light. Built-in EMC system, these compact auto led kit can reduce radio interference issues..
  • LONGER LIFESPAN: Last more than 30,000 hours. Rainproof driver, housing, and fan works even in extreme situations..
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No

  • Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
  • Each soldering flux pen measures approx. 5.6 inches in length.
  • Safe to use: these flux pens are made of quality material, no leak and safe to use.
  • Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
  • No residue will interfere with electrical testing.
  • Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
  • It allows controlled application of flux, thereby removing dirt in the flux bottle.
  • Pen tip of 10 ml with practical designed felt tip.
  • The solid content is low and there is almost no residue.
  • Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
  • It is lightweight and would not occupy too much space, suitable pocket size to carry.
  • How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
  • After that, you can use the alcohol to clean the pen.
Check Stock

Sealed Unit Parts MFD10 LED Display Digital Capacitori Tester

  • The Supco Capacitor Tester is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Supco Capacitor Tester provides the fastest measurements of capacitor values with one hand operation.
  • Supco MFD10 has accuracy ± 5% and range of 0.01 to 9,999 MFD.
  • The high quality Supco Capacitor Tester includes soft carying case for easy transport of device and test clips.
  • Repair your appliance with confidence when you choose Supco Capacitor Tester.
Check Stock

Transformers Toys Generations -- Transformers Collaborative: Back to The Future Mash-Up, Gigawatt -- Back to The Future-35 Edition - Ages 8 and Up, 5.5-inch

  • MORE THAN MEETS THE EYE: Transformers robots have always been: More Than Meets the Eye, but now, through the Transformers Collaborative, fans can experience these larger than life characters as they team-up, mash-up, and meet up with other characters, teams, and people who share this same special quality.
  • CELEBRATE 35TH ANNIVERSARY WITH TRANSFORMERS-BACK TO THE FUTURE MASH-UP: When Marty and Doc Brown need a ride through time, Gigawatt is ready to fly. This time-traveling Autobot commemorates 35 years of Back to the Future!.
  • MOVIE-INSPIRED DECO: Gigawatt figure features details inspired by the Back to the Future film, including Doc Brown-style goggles, a flux capacitor chest piece, and time circuits. Comes with blaster and whip antennae accessories. Converts from robot to time machine mode in 17 steps.
  • WHERe WE’RE GOING, WE DON’T NEED ROADS: In time machine mode, Gigawatt figure features opening gullwing doors and articulated rotating wheels for simulated hovering effect as seen at the end of the movie.
  • A RACE AGAINST THE TIME: Can the time travelers beat the clock? Or will Gigawatt run out of time, plutonium, and Energon?.
Check Stock

Capacitor 45 5 MFD 370V Dual Run Round Capacitor for Condenser Straight Cool or Heat Pump Air Conditioner

  • 45 5 / MFD 370 volt AC capacitor: round dual run capacitor.
  • Size: the dual run capacitor measures 3.88 x 2 inches/ 9.86 x 5 cm.
  • Range of temperature: the round capacitor can work from -40u2109 to 158u2109/-40u2103 to 70 u2103.
  • UL certificate: This dual run capacitor is built to the toughest USA standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.
  • Note: 370 45 4 capacitor compatible with GE C3455R, 97F9895, Z97F995, 97F9895BZ3, 27L880, TRCD455, 97F9895.
  • The brand and model mentioned above is just for demonstrating capability.
Check Stock

USA Made Capacitor Oval 10 uf MFD 370 Volt 97F9002, 97F9002s (Replaces Old GE# 97F9002BZ3, Z97F9002, 27L669), 10 MFD at 370 Volts

  • Replacement Oval Run Capacitor for GE 621435.
  • Used in a wide variety of applications to keep them running at optimum performance.
  • Replace your capacitor when it is bulging, leaking, or when there is no continuity accross the terminals.
  • When buying a capacitor: The voltage should be higher or equal but not lower to the original capacitor. The capacitance (uf, mfd) should match the original capacitor. The Hz should match the original capacitor. The terminal type should match the original capacitor. The size and shape should be considered only when the space in the application is limited..
Check Stock