Categories

Best Foam Lance For Car Wash

Tool Daily Pressure Washer Foam Cannon for Car Wash, Snow Foam Lance, Additional Orifice Nozzle 1.1mm, 1/4 Inch

  • ...xtra-wide neck to prevent crack issue..
  • EASY to install: fill some soap into the bottle with warm water to get thick foam.
  • Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Specification for Pressure Washer: 1000 PSI to 3600 PSI. Finally, adjust the knob to desired foam level and then Snow Foam Lance will disperse thick foam..
  • Additional orifice nozzle: Backup foam cannon orifice nozzle attachs. 1.1mm orifice nozzle create thicker foam than original one below 2500 PSI. Please use original nozzle if working pressure is higher than 2500 PSI..
  • Application: ideal for Motorcycle, Car Washing.
  • floors, Windows washing, it is best product for Detailing Trucks or SUVs.
  • Correlation: hot release no tips bucket filter sealant wax blaster free garden jet wash plastic generation warmer care using ounce design cans turn vehicle maker temp floor variable remover guy tank products enthusiast connectors powder device brush mix black way gpm it sfl bubble truck be wall dispenser mixing chemical container duty brass max tip machines fluid car hydro flow suction liter fittings heavy package washers system rinse kit pot out oz dial guns bar.
Check Stock

RIDGE WASHER Foam Cannon for Pressure Washer, 1/4'' Quick Connector, Adjustable Snow Foam Lance Foam Blaster for Car Wash with 5 Nozzle Tips, 1L

  • Heavy-Duty Design: Adjustable foam cannon with 1/4" quick disconnection fitting. Snow foam lance with premium quality brass construction, foam cannon bottle made of durable plastic, wear-resistant, corrosion resistance, long service life..
  • Easy to Install: Put soap in the bottle, then topped up with warm water. Gave it a little shake then attached 1/4" plug to the high-pressure washer gun or wand.
  • Adjust the knob on the top to get the foam level you need, then spray. Adjust the two ends of the nozzle to get different sprinkle patterns and dispersing directions..
  • Specification: Power washer foam cannon's working condition is 1200 PSI to 3600 PSI.
  • Foam cannon for pressure washer's Max temperature is 60℃（113℉）； Foam blaster for pressure washer's Container Capacity: 1 Liter / 0.22 Gallon..
  • 5 Upgrade Nozzle Tips: 5 different spray angles (0, 15, 25, 40, 65 degree). Replace nozzle according to the actual need. The pressure washer nozzle also can be connected to pressure washer extension wand, enabling you to reach under and around objects with ease. Ideal for watering flowers and plants, washing....
Check Stock

Foam Cannon - Pressure Washer Gun with 1/4 Inch Quick Connect and Adjustable Nozzle Car Wash Sprayer with 1 L Bottle, Professional Car Foam Cannon Fits Most Pressure Washing Accessories (4000 PSI)

  • ... ergonomic groove, easy to hold and not easy to slip.
  • Reinforced wide neck to prevent neck from Cracking and Easy to fill with soapy water. The bottom of the fluid conduit added a filter head to avoid foam clogging unable to spray foam..
  • [Adjustable Snow Foam Cannon]: foam Lance with 1/4" quick connection fitting. Container Capacity: 1 Liter / 0.26 Gallon. Specification: 1000 PSI to 4000 PSI..
  • [Easy to Use]: Fill bottle with warm water and soap to obtain a thick lather, connect 1/4" quick connect plug to pressure washer gun or wand. Turn the top knob right (-) and the top knob left (+) to adjust to the desired foam level, adjust nozzle to control the spray area and horizontal/vertical. The snow wash foam cannon is transparent, you can see the rest of the cleaner. Clear scale lines facilitates observation of capacity..
  • [Wide Application]: Foam gun suitable for 1000-4000PSI of most pressure cleaners. Can be used for car, bicycle, motorcycle cleaning, floor, window cleaning, driveway, roof, siding cleaning, etc., Great for removing dust and dirt, it’s best product for Detailing Trucks or SUVs and best cho....
Check Stock

GDHXW X-999 Foam Wash Gun 3000 PSI High Pressure Snow Foam Lance Foam Cannon Foam Blaster with M22-14mm Thread 5 Pressure Washer Nozzles for Cleaning Car

  • Pressure washer gun is Metric M22-14mm inner connector Adjustable Snow Foam Lance with 1/4" quick disconnection fitting.Capacity:0.22 Gallon(1L) .Requires pressure washer to Have 2.0GPM & Over 1000 PSI Pressure for use.Requires pressure: 70BAR - 1000PSI.
  • Foam Lance core is made of quality brass.The main body is solid brass and is heavy. There are (2) adjustment's that allow you to dial-in the sprayer for any situation: top dial is for foam dispensing amount and the nozzle adjusts the spray pattern (wide to narrow)..
  • Spray Nozzle has 5 different spray angle : Meet your need in different situations, such as watering flowers and plants, washing car, and can be attached to a quick-connect wand for swifter application and more..
  • Variable adjustable spray nozzle for accurate mixing and foam generation.Turn the top knob right / closed to get the thickest mixture, adjust the nozzle to get a proper spray pattern, and let it loose..
  • Multiple use: Car Washing, floors,Windows washing, Driveways, Roofs, Siding washing and so on.Ideal for enthusiast or professional use.It can be directly connected with the gun on the pressure washer gun..
Check Stock

iK Foam PRO 2 Pump Sprayer

  • Adjustable Snow Foam Lance with 1/4" quick connection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI..
  • EASY to install: fill some soap into the bottle with warm water to get thick foam.
  • Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Finally, adjust the knob on the top to desired foam level and then foam sprayer will disperse thick foam. The knob adjusts the foam dispensing amount and the nozzle adjusts the sprinkle pattern..
  • Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose..
  • 5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more..
  • Application: ideal for Motorcycle, Car Washing.
  • floors, Windows washing, it is best product for Detailing Trucks or SUVs..
Check Stock

GDHXW X-887 High Pressure Washer Gun Snow Foam Lance Cannon Foam Blaster 2 Adapter 7 Pressure Washer Nozzles,for Car Washing

  • Foam lance with 1/4" Quick Connector fitting. Capacity:0.22 Gallon(1L) . Pressure washer gun is Metric M22-14mm inner connector ( M22 adapter: you need to install it when your water pipe connector is M22-15mm)..
  • Spray Nozzle has 7 different spray angle : Meet your need in different situations, such as watering flowers and plants, washing car, and can be attached to a quick-connect wand for swifter application and more..
  • Foam Lance core is made of quality brass.The main body is solid brass and is heavy. There are (2) adjustment's that allow you to dial-in the sprayer for any situation: top dial is for foam dispensing amount and the nozzle adjusts the spray pattern (wide to narrow)..
  • Variable adjustable spray nozzle for accurate mixing and foam generation.Turn the top knob right / closed to get the thickest mixture, adjust the nozzle to get a proper spray pattern, and let it loose..
  • PLEASE NOTE:This product is a pressure washer accessory and cannot be used with garden hose..
Check Stock

Twinkle Star 3000 PSI High Pressure Washer Gun Snow Foam Lance Cannon Foam Blaster with M22-14mm Thread

  • High Pressure Washer Gun and Pressure Washer Jet Wash Bottle is perfect for car cleaning, windows washing, Driveways, Roofs, Siding washing. 140 degree F Maximum..
  • Hand grip with quick connector, easy to install. Detachable design, easy to carry and storage..
  • 3000 PSI high pressure water gun body, brass fitting, M22-14 Thread inlet fitting..
  • Adjustable Foam Lance with 1/4″ quick disconnection fitting, 33 OZ (1 liter) container bottle..
  • ONLY SUITABLE FOR PRESSURE WASHER HOSE, PRESSURE WASHER..
Check Stock

TriNova Foam Cannon for Pressure Washer - Original Wide Neck, Wide Base Heavy Duty Foam Gun for Detailing

  • ✅ EASY TO USE - just fill up the reservoir bottle with soap, click in to your existing pressure washer lance or trigger, adjust the knob for your desired foam level, and spray! Hose water from compressor comes quick for a cleaner advanced automotive dirt removal..
  • ✅ GREAT FOR CAR WASHING - Soak your ride in a mountain of suds to ensure that all the grime, bugs, dirt, sap, dust, and other contaminants from the road are loose before you try to wipe them off. Professional attachments and accessories for guys who love cars..
  • ✅ WIDE NECK WON'T CRACK - Scroll through the images of all the generic canons, you'll see a common theme: Cracked necks. Our design has an extra-wide neck to prevent that problem. This canon works for car washing but can also help to clean off the side of your home, your sidewalk, or anything else that needs a deep cleaning. Works with any psi sprayer, the perfect foaming tool for any detergent..
  • ✅ QUALITY - Made by TriNova, a brand synonymous with high performance. Pairs well with their Car Wash Soap. Nozzle adapter connector fits all air cleanser equipment..
Check Stock

Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter, 5 Pressure Washer Nozzle Tips

  • Adjustable Snow Foam Lance with 1/4" quick connection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI..
  • EASY to install: fill some soap into the bottle with warm water to get thick foam.
  • Then connect 1/4" quick connection plug to Pressure Washer Gun or Wand. Finally, adjust the knob on the top to desired foam level and then foam sprayer will disperse thick foam. The knob adjusts the foam dispensing amount and the nozzle adjusts the sprinkle pattern..
  • Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose..
  • 5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more..
  • Application: ideal for Motorcycle, Car Washing.
  • floors, Windows washing, it is best product for Detailing Trucks or SUVs..
Check Stock

HassPro Foam Cannon Pressure Washer Gun - Premium Quality Foam Blaster 1LT Bottle with 1/4

  • ...er Nozzle for your Car included 1.1mm Orifice that comes installed. You will be shocked and amazed at how your car will shine! Please check your machine before purchase your Snow Foam Blaster, dont fit garden hose..
  • EASY TO USE - Just fill up the reservoir bottle with soap, click in to your existing pressure washer lance or trigger, adjust the knob for your desired foam level, and spray! Hose water from compressor comes quick for a cleaner advanced automotive dirt removal..
  • SAVE YOUR MONEY AND HASSLE Never Waste Your Money on Car Washes! Save Yourself buying the NEW HassPro PROFESSIONAL Foam Cannon avoiding going to Car Cash Every Week, Its a WIN-WIN! Perfect for Driveways, Vans, Roofs, Garden Hose, Siding, Cars, Trucks, SUVs, boats, trucks and window displays too! DONT WAIT, GET YOURS TODAY!.
Check Stock

Foseal Adjustable Snow Foam Cannon with Heavy Duty Brass Knob, 1/4" Quick Release Foam Blaster for Pressure Washer Gun, 1L Bottle

  • Nice nozzle foams great, coats the vehicle well.
  • It gives lots of thick foam on a wide or narrow spray.
  • The soap can be turned off to give you a wide or narrow spray with clean water.
  • Connects this snow foam soap cannon to the washing gun of pressure car washer with 1/4" quick disconnection fitting.
  • Requires pressure washer to Have 2.0GPM & Over 1000 PSI Pressure for use.
  • Foam cannon Can be used for Car, Motorcycle Washing, floors,Windows washing, Driveways, Roofs, Siding washing，watering the flowers，bathing dogs and so on..
  • "Foam Lance core is made of quality solid brass and it is heavy for durable use. 1/4"" Quick Release Foam Blaster for Pressure Washer Gun, 1L Bottle. ".
  • Detail package includes: 1 Snow Foam Cannon ,instructions , 18 months Quality Insurance from foseal..
Check Stock

MATCEE Foam Cannon 1 Liter Bottle Adjustable Snow Foam Lance with 1/4 Quick Connector Foam Blaster for Pressure Washer Gun or Wand 5 Pressure Washer Nozzle Tips for Car Outdoor Cleaning

  • Adjustable Snow Foam Lance with 1/4" quick connection fitting. Heavy duty brass foam blaster core and main body for durable use.1 Liter / 0.22 Gallon....
  • 5 Different Spray Preesure washer Nozzles : Meet your need in different situations, such as watering flowers and plants, washing car, and can be....
  • Variable, adjustable spray nozzle for accurate mixing and foam generation.Minus (-) sign indicates less water (more foam), the (+) indicates more....
  • Requires pressure washer to Have 2.0GPM & Over 1000 PSI Pressure for use. Requires pressure: 70BAR - 1000PSI.
  • Widely Application: The spray foam cannon can be used for car, Motorcycle Washing, floors,Windows washing, Driveways, Roofs, Siding washing and so on.....
Check Stock

M MINGLE Foam Cannon, Replacement Parts for Portland Husky and Ryobi Pressure Washer, with 5 Nozzle Tips, 1/4 Inch Quick Connector

  • ... or foam cannon. The other end is inserted into the gun and rotated the adapter clockwise..
  • 【Foam Cannon】Fill soap into the bottle with warm water.
  • Connect the 1/4" plug to Pressure Washer Gun Adapter.
  • Adjust the knob on the top to desired foam level and then Foam Lance will disperse thick foam. The knob adjusts the foam dispensing amount and the spray nozzle adjusts the spray pattern. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI. Maximum Flow: 5.3 GPM..
  • 【5 Spray Nozzle Tips】They have different spray angles (0, 15, 25, 40, and 65 degrees). Choose different nozzles according to your needs. Such as watering flowers and plants, and washing the car. Max pressure is up to 3000 PSI..
  • 【Widely Application】The Foam Nozzle is ideal for Motorcycle, Car Washing.
  • Floors, and Windows washing. Best product for jet washing Detailing Trucks and SUVs..
Check Stock