Categories

Best Foam Net Extrusion Line

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

eSUN PLAPlus Filament, Black, 1 kg

  • 1Kg net (Approximately 2.2 lbs) filament with clear Spool.
  • eSUN PLA pro 3D printer filament vacuumed sealed with desiccant. Superb layer bonding. Several times stronger than PLA.
  • Recommended extrusion/nozzle temperature 210C - 225C, about 20 celsius higher than regular PLA.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool hub hole Diameter: 2.05" - inner circle Diameter: 3.5".
Check Stock

THKFISH Fishing Bobbers 5PCS EVA Foam Floats Red/Yellow Snap-On Spring Fishing Buoy Weighted Snag On Cigar Float for Crappie 3in

  • MATERIAL:These fishing bobbers are made of EVA foam material.Solid design and hard,water-proof,anti-extrusion and not easy to corrode.The surface of the body is painted with eye-catching colors to increase visibility..
  • SPRING FIXED DESIGN:Spring fixed design allows for quick and easy depth setting.Snap on float that keeps the hook and bait suspended above the bottom at the desired depth.Slip bobbers are certainly more cosmetically pretty and don't pinch your line..
  • EASY TO USE:There are spring butons on the up and dowm of the float body.Fishing floats are easy to push button and release heavy-duty springs that ensure strong line grip..
  • SIZE:Three size for your choice,meet most of the fishing needs.Size1.5in,length 2.31in,width 0.55in.
  • Size 3in,length 3.6in,width 0.83in.5pcs/pack..
  • AFTER SERVICE:If you have any problem, please contact our customer support and we will reply you within 24 hours.Within 30 days, any quality problems, we will take full responsibility..
Check Stock

Frabill Power Catch Net 26 x 30-Inch

  • Ergonomically-designed handle eliminates torque and roll-over found in traditional round handles | Patented Pow'R Lok yoke slides handle through for....
  • Brute Hoop unique hexagonal profile for reduced drag | Corrosion-proof stainless steel hardware.
  • Dual "I-Beam" extrusion spans entire length of hoop for added strength | Tangle-Free weighted netting drops into water quickly.
  • Hoop Size: 32" x 41" Sliding Handle Length: 48" Net Depth: 38" Mesh: 1/12".
Check Stock

eSUN 1.75mm Natural ABS 3D Printer Filament 1kg Spool (2.2lbs), Natural

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 220C - 260C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Gray ABS 3D Printer Filament 1kg Spool (2.2lbs), Gray

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 220C - 260C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

Gizmo Dorks Metal Copper Fill Filament for 3D Printers 1.75mm 200g

  • Metal Copper (Copperfill with PLA base) 3D printer filament vacuumed sealed with desiccant.
  • Extrusion nozzle temperature: 190 - 225 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..
Check Stock

Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g Black

  • Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance.
  • Extrusion nozzle temperature: 255 - 300 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA.
Check Stock

Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g Blue

  • Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance.
  • Extrusion nozzle temperature: 255 - 300 C.
  • 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA.
Check Stock

304 Stainless Steel Double-layer Manual Foamer for Milk Coffee, etc. (27 oz)

  • Made of 304 stainless steel, the surface is brighter, no scratches, safe and durable..
  • Double-layer filter, the filter line on each filter net is harder and denser, and it can produce rich and delicate milk foam..
  • Easy to use, easy to clean, suitable for home, high-end coffee shop, etc..
  • Outer diameter 4.7 inch, bottom diameter 3.9 inch, cup height 4.8 inch, total height 7.9 inch, weight 1 lb.
  • For those who are traditional craftsmen, use the manual bubbler, evenly and evenly, the speed should not be too fast, can produce super delicate milk foam, which is more artistic and unique than the automatic bubbler..
Check Stock

Comgrow 3D Printer PLA Filament 1KG 1.75mm Spool Black Color

  • 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Please pass one end of the filament into the fixing hole to avoid being entangled after use..
  • High quality PLA filament for your 3D printer..
  • Compatible with any 3D printer that use 1.75mm diameter filament..
  • Recommended Extrusion / Nozzle Temperature 180¡ãC - 215¡ãC..
Check Stock

Podoy FS80 Fuel Line FS85 Grommet Kit for Compatible with STIHL KM85 FC75 FS76 FS74 Trimmer

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock