Categories

Best For Brazing Of Heat

Thermaltake 240mm Pacific DIY Liquid Cooling System R240 Radiator Cooling CL-W009-AL00BL-A

  • Optimized Heat Dispatching: Thermaltake R Series Radiators deliver an average heating load of 32℃-35℃. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer..
  • Slim Form Factor Design: R Series is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on one side, and then circulates back to the other side of the radiator..
  • High-Density Fin Design: The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 17..
  • German-Made Anti-Corrosion Materials: Designed with German aerospace-grade materials and constructed with zinc. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing..
Check Stock

Diablo by Freud D1024X 10\ 24-Tooth ATB Ripping Saw Blade 5/8\ Arbor, Multicolor

  • Tico high-density Carbide for increased performance and maximum cutting life.
  • Perma-shield Non-Stick coating for protection against heat, gumming and corrosion.
  • Super-thin kerf design for fast and effortless cuts.
  • Laser cut Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows Carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
Check Stock

Freud D1244X Diablo 12-Inch 44 Tooth ATB General Purpose Miter Saw Blade with 1-Inch Arbor

  • Laser cut Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows Carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Propane Torch ,Mapp Torch Head,MAPP/MAP/PROPANE Gas Torch(Stainless Head)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

Propane Torch ,BBQ Torch ,MAPP/MAP/PROPANE Gas Torch,Soldering Torch (Basic simple payment)

  • 【wide use】Install the propane cooker cutting torch is capable for various working environments including large diameter soldering,brazing,heat treating, glassblowing, and light welding.For soldering & Brazing application in HVAC and plumbing..
  • 【Powerful and easy to control flame】 The high-quality vortex propane design can make the flame provide the maximum heat output. The knob on the cutting torch can easily control the flame size to meet the needs of different projects..
  • 【Easy to use】Install the propane cooker cutting torch handle on your gas tank, then turn the knob to ignite the flame to start welding..
  • 【Elaborate design】The brass torch is resistant to high temperature, not easy to corrode, and durable. The propane pencil torch tip is a threaded joint with a diameter of 0.6 inches (1.6 cm), which can finely weld copper pipes with a diameter of less than 1 inch (3 cm).The maximum diameter of soldering can reach 3.9 inches (10cm)..
  • 【Product certification】Trigger to start the propane hose cutting torch using SPARC MAPP / propane gas hose cutting torch. Reliable product quality has obtained a number of safety certifications, including CE, ISO9001 certification can be used with confidence..
Check Stock

Freud Diablo D0648F 6-1/2\ x 48-Tooth Steel Demon TCG Ferrous Cutting Circular Saw Blade 5/8\ Arbor

  • Efficiently cut through ferrous metals quickly and accurately, leaving clean, burr free cuts.
  • Ideal for cutting steel studs, steel pipe, and steel sheet.
  • Ideal for most mild steels under 1/8 in. Thickness.
  • Features Freud's TiCo Hi-Density Carbide with titanium for long life and a flawless finish.
  • Triple chip design for longer cutting life in metal.
  • Laser cut Stabilizer vents trap noise and vibration and stabilize blade.
  • Tri-metal shock-resistant brazing for stronger Carbide teeth..
  • Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish.
  • Triple Chip Design for longer cutting life in metal.
  • Laser cut stabilizer vents trap noise and vibration and stabilize blade.
  • Tri-metal shock-resistant brazing for stronger carbide teeth..
Check Stock

Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor, Red

  • Features Freud's TiCo Hi-Density Carbide with titanium for long life and a flawless finish.
  • Super thin laser cut kerf gives extremely fast, durable, and clean cuts.
  • Non-stick perma-shield coating to resist heat and reduce pitch build-up.
  • Laser-cut Stabilizer vents trap noise and vibration keeping the blade Cool and reducing blade warp.
  • Tri-metal brazing for impact-resistant tips.
  • Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish.
  • Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up.
  • Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp.
  • Tri-Metal Brazing for impact-resistant tips.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Clyxgs Aluminum Water Cooling Block Heat Sink Liquid Water Cooler Exchanger Graphics Radiator Refrigeration for CPU PC Computer 40x 40x 12mm Blue

  • ✅ Product Name: CPU Water Cooling Block.
  • Processing: Vacuum Aluminum Brazing, Surface Anodization..
  • ✅ Internal flow channel extrusion forming, brazing parts into a whole..
  • ✅ Leak rate of less than 5X10-6 mbar.l/s parts..
  • ✅ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling..
Check Stock

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

HVAC Outfit, Handle 11-1114, Model: 23-5005A, Tools & Outdoor Store

  • Small Torch and flexible hoses allow brazing in tight places, impossible for other torches..
  • The Quickbraze System with its pinpoint heat is ideal for leak repair of sealed systems..
  • Concentrated 6000 F flame provides greater efficiency, reducing gas costs..
  • Precise flame control minimizes risk of burning surroundings..
  • Torch hoses are covered with extremely durable, heat resistant Kevlar..
Check Stock