Categories

Best For Oil Pump

Oil Change Pump Extractor 12v 60w Oil Extractor Pump Oil Pump Extractor Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil Oil Change Pump for Boat Tubes Truck RV ATV Riding Mowe

  • QUICK AND CLEAN OIL CHANGES - Transfer pump for changing oil. Extracting Motor Oil From Your Vehicle Without Mess & Specialized Tools Extract The Oil....
  • ENGINE OIL CHANGE MADE EASY! - The 12v oil extractor pump are very easy to use and makes a top down oil change so easy. Pumps oil out throw dip stick,....
  • FOR DIFFERENTIAL FLUID AND TRANSMISSION FLUID - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just....
  • PROFESSIONAL OIL CLEANING TOOL - The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water,....
  • 100% CUSTOMER SATISFACTION GUARANTEED - 1MANNEW OIL CHANGE PUMP EXTRACTOR - 12 Volt / 5 Amp DC Motor.Ideal Transfer Pump for your quick and clean....
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • 【Widely Used】Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.The DC oil pump adopts the vane pump working mode..
  • Diesel or heating oil: approx 6.0-7.0L/min.
  • Motor oil(40-60℃)：approx 0.8-1.0L/min.Measurements:3.3*5.1*4.9in,Weight:1.87pounds,Maximum delivery Height:0.7m..
  • 【Working Principle】When the oil well pump rotor rotates, the blades on the rotor are closely attached to inner surface of stator under the action of centrifugal force and oil pressure, so that the 2 blades are formed by inner surface of rotor and stator. The working volume of pump is first to absorb oil from small to large, and then to discharge oil from large to small after absorbing oil. Within one rotation of blade, oil absorption and discharge are completed twice. This cycle continues..
  • 【Package Include】The pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative pol....
Check Stock

Hand Diesel Transfer Pump,55 gallon drum pump Aluminum alloy corrosion resistant,For 5 to 55 gallon drum

  • Fuel Pump: The hand pump is perfect for transferring various oils, such as fuel oils, diesel, lubricating oil and more. Ideal for use at home, industry, marine, and farms. Note: Not suitable for pumping water or corrosive liquids..
  • Corrosion resistant: This drum pump is made from high quality aluminum alloy, light weight, easy to carry, durable and corrosion resistant..
  • PUMP OIL QUICKLY : Oil Transfer Pump pump oil up to 30L/min,With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks..
  • EASY TO OPERATE : Fits 5 gallon to 55 gallon drums, Easy to handle and operate, it can be assembled quickly and disassembled after use for convenient storage..
  • The hand pump hose extends to 24 inches and the hand pump comes in a box for easy portability..
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock

Lawnmower

  • ❥❥❥ Widely Application: It is great for pumping fuel oils, petrol, diesel, lubricating oil, cooking oils and many other oils. BUT DO NOT pump....
  • ❥❥❥ Main Function: With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks. Keep this pump in....
  • ❥❥❥ Use Tips: Add some oil that requires pumping into the pump to prime it before you start to pumping oils. Lubricate the pump with grease is....
  • ❥❥❥ Specifications: Main Material: Aluminum Alloy. Inlet Diameter: 3cm / 1.18in. Outlet Diameter: 2.5cm / 0.98in. Length: 124cm / 48.81in.....
Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

Jabsco Hotshot HD4 Kit - 12V 4GPM 60PSI Heavy Duty Washdown Pump w/25' Hosecoil

  • This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.It works great for pumping engine oil, crude oil and heating oil..
  • TSuitable for Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial, water purification &treatmentequipmentvehiclecleaningagriculturalsprayingetc..
  • With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

  • SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

TOPEMAI 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump for Auto Car Boat Motorbike Truck RV ATV Jet with Hose - Engine Oil Change Pump,ATV Oil Change Pump

  • 12V 60W Oil Extractor Pump ideal for Motorcycles,Vans,Cars,Quads,Truck,Boat,Forklift,Generator,Tractor,Scooter and Other Vehicles. Quick extract oil....
  • Oil Diese extractor pump's Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that you can do at home.High....
  • This 12V Oil Transfer Pump High Flow Rate: 3L/min flow rate for engine oil, 4L/m for diesel.12V Oil Transfer Pump AKA Oil Transfer Pump 12V,Oil Change....
  • This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just need to place the inlet/outlet hoses at the....
  • Note: Our pumps are designed to be a little workhorse. As with all 12V pumps however, we recommend a short break after 10 minutes continuous usage....
Check Stock

ELEAD 500cc Oil Extractor Pump, Oil Transfer Pump, Fluid Extractor, Fluid Syringe Extractor, Car Vacuum Fuel Transfer, Siphon Pump for Gasoline Hand Cleaner for auto Mechanics

  • [The Application of Fluid Extractor ] Fluid Pump is used to extract and replace mechanical fluids such as transmission fluid, antifreeze, power steering fluid, gear oil, and brake fluid from ATVs, cars, boats, trucks, RVs, lawn mowers, golf carts and other vehicles..
  • [The Accessories of Oil Extractor ] Gear Oil Pump includes:1 clear liquid syringe with locking adapter, 2 extension tubes (length 8" diameter 1/4" and length 8" diameter 3/8" and locking cap at the end of the hose). gear oil pump extending transmission fluid pump'service life..
  • [The Materials of Liquid Transfer Pump ] Oil Pump Extractor uses new quality eco-friendly materials for strength, sealing and durability. It is also removable for easy cleaning and maintenance..
  • [Easy to Use Oil Transfer Pump ] Insert the hose into the adapter,can be locked,press the black button to easily remover the hose. extended syringe hose helps draw or inject liquid easily..
  • [The Packaging of Oil Pump ] Oil Change Pump with exquisite color box , bring you high-end beautiful visual experience, can also be as a....
Check Stock

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • M295 STANDARD VOLUME OIL PUMP - A mechanical device that circulates oil to the bearings, camshaft and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money ....
Check Stock

High Volume Oil Pump Replacement - Compatible with 4.8L 5.3L 6.0L Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295HV

  • REPLACEMENT HIGH VOLUME OIL PUMP - If you have an engine that can rev beyond 6,000 RPM or higher, a high performance or high volume oil pump would probably be a good upgrade and provide added lubrication insurance..
  • FIT THE FOLLOWING VEHICLES - High volume & high pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357 12586665 oil pump, replace Melling M295HV oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling high volume oil pump, but it works even better and lasts longer. Save yourself times and money by replacing high volume oil pump yourself..
Check Stock