Categories

Best Ford 463power Steering Cylinder

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

Distributor Cap Rotor and Spark Plug Wires Set - Ignition Tune-Up Kit - Compatible with 1984-1996 Ford F-150 4.9L 6-Cylinder

  • Compatible with or fits: (Note: Tall Cap) 1984 - 1986, 1996 Ford F-150 4.9L 6-Cylinder.
  • Compatible with or fits: 1995 Ford F-150 Special 4.9L 6-Cylinder.
  • Compatible with or fits: 1995 Ford F-150 Eddie Bauer 4.9L 6-Cylinder.
  • Compatible with or fits: 1993 - 1995 Ford F-150 XL 4.9L 6-Cylinder.
  • Compatible with or fits: 1993 - 1995 Ford F-150 XLT 4.9L 6-Cylinder | 1987 - 1992, 1996 Ford F-150 4.9L 6-Cylinder.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

TRIAX Powerfluid 450 Full Synthetic Power Steering Fluid, Lifetime Fill, CHF 11S, CHF 202, CHF 7.1 for All European Cars, OEM Grade, Hydro-Pneumatic Suspension (1 Quart)

  • ...he following Asian vehicles: Toyota, Nissan, Mitsubishi, Kia, Infinity.
  • True synthetic PAO and ester formulation.
  • Made with the highest possible quality components.
  • Extreme high heat operational temp 266 F.
  • Will maintain steering and hydraulic system performance at very cold temperatures.
  • Smooth steering response and flawless power steering and hydraulic performance.
  • Extreme viscosity stability assures consistent flow in a very wide temp range.
  • Eliminates "lazy" steering in hot weather and steering hard to move in cold weather.
  • Compatible with all European, Asian, and US modern vehicle power steering systems.
  • self-leveling suspensions, tractor control systems, shock absorbers, hydro-pneumatic suspensions, central locking systems, convertible tops hydraulic systems, electrical power steering pumps on modern vehicles.
  • Compatible with / replacement for: Pentosin CHF 11S CHF 202 & CHF 7.1, Audi / VW G002000 & G002012, G 002 000 A2, TL 52 146.00, Bentley RH 5000, BMW / Mini 82 11 1 468 041 / 82 11 0 148 132 / 83 29 0 429 576, Chrysler MS-10838, 05142893AA, MS-1872, MS-5931, 04883077, MS-9602, ATF+4, MS-11655, Ford M2C195-A & M2C204-A, GM 9985010, 1052884, 9985835,....
Check Stock

VEVOR Hydraulic Steering Cylinder 300HP, Hydraulic Steering, Front Mount, Hydraulic Outboard Steering Cylinder for Marine Boat Steering System

  • Max Working Pressure: 10.3Mpa: The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi..
  • Advanced Crush Resistance: State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Easy to Install: This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement..
  • Wide Application: Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock

A-Team Performance - Steel Key-Way Power Steering Pump Pulley Single Groove - Compatible with 1955-72 GM Chevrolet SBC BBC Small and Big Block Chevy SBF Small Block Ford Black

  • Steel Key-Way Power Steering Pump Pulley Single Groove, Black.
  • Compatible with 1955-72 GM Chevrolet SBC BBC Small and Big Block Chevy SBF Small Block Ford.
  • V-belt Pulleys — Compatible with small and big block Chevy and small block Ford. A-TEAM'S steel pulleys provide affordable style and reliability, quality-tested to ensure trouble-free performance and durability.
  • Available in multiple finishes, A-TEAM'S got v-belt pulleys for small and big block Chevy and small block Ford.
  • Easy to install and helps restore power steering to proper functioning.
Check Stock

Plasticolor 008851ZA1 Ford Steering Wheel Cover with Fancy Logo Keychain

  • ✔️ YOUR PERFECT STEERING WHEEL COVER – Imagine How Beautiful Your Vehicle Would Look With Our Ford Elite Logo Cover Installed Around Your Steering Wheel!.
  • ✔️ OFFICIALLY LICENSED - Our Ford Elite Logo Wheel Cover Is Officially Licensed By Ford..
  • ✔️ UNIVERSAL FIT - Our Ford Elite Logo Wheel Cover is Perfect for Any Standard Size Steering Wheel Cover That Measures From 14.5”-15.0”. See Installation Diagram and Please Measure Before Ordering..
  • ✔️ BONUS KEY CHAIN - Included In This Package Is A Matching Bonus Keychain..
  • ✔️ 30 DAY RETURN POLICY - Love Them Or Return It, No Questions Asked!.
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

A-Premium Power Steering Hose Pressure Line Hose Assembly Compatible with Ford Escape 05-07 Mazda Tribute 05-06 Mercury Mariner 05-08 2.3L 3.0L

  • 【Vehicle Fitment】This power steering pressure hose is compatible with Ford Escape 2005-2007 L4 2.3L.
  • compatible with Mazda Tribute 2005-2006 L4 2.3L.
  • compatible with Mercury Mariner 2005-2008 L4 2.3L, Mariner Base 2008 V6 3.0L.
  • 【The Performance】Hose Type: Power Steering Hose Assembly.
  • 【Reference Number】The A-Premium power steering pressure line hose assembly's reference number: 6L8Z3A719A, 6L8Z3A719AA, 3402336. Before placing an order, verify that this power steering tube is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this power steering hose pressure line is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Mityvac MVA670 Power Steering Adapter Kit Removes Trapped Air from Power Steering Systems Includes Three Adapters – One Universal as Well as a Ford and GM Version MITMVA670

  • The folllowing adapters are included: MVA662 Ford Power Steering Adapter.
  • Featuring a robust design and construction, all three adapters include an inline, barbed connection for a 1⁄4 in. internal diameter hose..
  • These adapters form an airtight seal in the neck of a vehicle’s power steering pump allowing for air evacuation..
  • Designed to function with Mityvac hand pump models MV8000 and MV8500 as well as most other brands of hand-vacuum pumps..
  • The MVA665 is available separately and can be interchanged with the inline connector on MVA661 and MVA662 for applications with limited overhead....
Check Stock