Categories

Best Ford Engine Valve Guide

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

2011-2014 Ford Mustang 3.7L V6 Engine Valve Appearance Cover OEM BR3Z6N041C

  • 2011-2014 Ford Mustang 3.7L V6 Engine Valve Appearance Cover OEM BR3Z6N041C.
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

ECOGARD X1A Spin-On Engine Oil Filter for Conventional Oil - Premium Replacement Fits Ford F-150, Explorer, Ranger, Mustang, F-250, F-350, E-150 Econoline, Bronco, Explorer Sport Trac

  • COMPATIBLE with 1975-2004 Ford F-150, 1991-2001 Ford Explorer, 1983-2000 Ford Ranger, 1964-1995 Ford Mustang, 1975-1996 Ford F-250, 1975-1997 Ford F-350, 1975-1996 Ford E-150 Econoline, 1966-1996 Ford Bronco, 2001 Ford Explorer Sport Trac..
  • BUILT for both SYNTHETIC AND CONVENTIONAL OILS. Proven to drive up to 5,000 miles between oil changes with confidence..
  • GREATER ENGINE PROTECTION by optimally screening out 97% of harmful contaminants such as such as carbon, sand, dust and bits of metal before they can get into your engine..
  • PREVENT DRY STARTS with by eliminating internal leakage during shutdown and startup through the use of an NBR anti-drain back valve (where required by OEM)..
  • WITHSTANDS FIVE TIMES ENGINE OPERATING PRESSURE for superior protection..
Check Stock

Ford Racing M-6067-3V46 Head Changing Kit for 4.6L 3V Engine

  • Fits 3-Valve 4.6L modular engine with standard 90.2mm bore and 3-valve head....
  • Kit includes multi-layer steel head gaskets and high-strength torque-to-yield head boltsOver the years, racing has become big business for teams, sponsors, and manufacturers around the world. However, "grassroots" motorsports remain at the core of Ford's DNA. Grassroots performance began with Ford and has become a part of American culture. The Model A is the most modified car in history, and enthusiasts the world over continue to embrace Ford, Mercury, and Lincoln cars and trucks from the....
Check Stock

OYEAUTO 6.0 IPR Valve Injector Pressure Regulator & ICP Control Sensor with Pigtail 5C3Z-9C968CA CM-5126 Compatible with Ford 03-10 6.0L Powerstroke Diesel Excursion F250 F350 F450 E350 E450

  • A Powerstroke engine utilizes an electromagnetic valve to regulate the high pressure oil pressure on the engine to tailor the injection characteristics of the injectors. This valve is called the Injection Pressure Regulator or IPR..
  • The IPR is located on the back of the high pressure oil pump, which is located UNDER the fuel filter assembly,down in the V of the engine.An IPR consists of two main parts: a pilot operated valve and an electromagnetic actuator..
  • Fitment:Compatible with Ford 2005 E-350 Club Wagon,2005-2010 E-350 Super Duty,2005 Ford Excursion,2005-2007 F-250 Super Duty,2005-2007 F-350 Super Duty.please check the year make model to make sure the IPR fit your car..
  • Replaces Part Numbers:5C3Z9C968CA,1846057C1,AP63417,CM-5126,5C3Z-9C968CA,CM5126..
  • Direct replacement part,IPR valve already comes with the new filter and o-rings installed..
Check Stock

DNJ VG3139 Valve Guide for 04-17, Buick, Cadillac, Chevrolet, GMC, Pontiac, Saab, Saturn, Suzuki, Acadia, Aura, Camaro, Caprice, Captiva Sport, Colorado, Equinox, 2.8L-3.6L, V6, DOHC, Turbocharged

  • FITS: 97-11 Ford, Mercury, Mazda, Land Rover 4.0L V6 SOHC Naturally Aspirated.
  • FITMENT NOTES: 7.1mm I.D., 12mm O.D., 44.2mm O.A.L., Intake and Exhaust, Exhaust.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

Vapor Canister Purge Valve - Replaces CX-2409, AU5Z9C915B, AU5Z-9C915-B, 911-222 - Compatible with Ford, Mazda, Lincoln, Mercury - Edge, Explorer, Escape, F150, Focus, Fusion, Mustang, Taurus, MKX

  • Replacement Evaporative Emissions Canister Purge Valve - A critical component of the EVAP system, the canister purge valve regulates the flow of fuel vapours being released for the engine to burn instead of the vapours just being released into the atmosphere. When your canister purge valve is bad it may trigger a CEL (Check Engine Light) with a code..
  • Compatible Replacement for Ford, Mazda, Lincoln & Mercury Vehicles - 2011-2018 Edge 3.5L | 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Escape 2.5L | 2011-2019 Explorer 3.5L | 2011-2017 F-150 5.0L | 2015-2017 F-150 3.5L | 2013-2019 F-250 Super Duty 6.2L | 2013-2019 F-350 Super Duty 6.2L | 2010-2019 Fusion 2.5L | 2013-2019 Flex 3.5L | 2011-2017 Mustang 5.0L | 2013-2019 Taurus 3.5L | & more. See below for a full vehicle list..
  • Replaces Part# CX-2409, CP758, CX2383, AU5Z9C915B, 9C915, AU5A-9G866-AB, 9U5Z9C915H, 9U5Z-9C915-H, 911-222, AU5Z9C915A, AU5Z9C915B commonly found on popular 2.0L, 2.5L, 3.0L, 3.5L, 3.7L, 5.0L, 5.2L, 5.4, 5.8L, 6.2L models with year models 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19. The canister purge evap valve can easily be located inside the engine bay usuall....
Check Stock

6.0 Injector Pressure Regulator IPR Valve Socket & Air Test Fitting Tool Kit & Fuel Rail Adapters for 2003-2010 Ford 6.0L for Powerstroke E-350/ E-450, Excursion, F-250/F-350/F-450/F-550

  • Fitment -- Fit for 2003 - 2010 Ford Super Duty F250 F350 F450 F550.
  • 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines..
  • IPR Valve Socket -- Replace the worn out injector pressure regulator (IPR) valve, designed to remove/replace your injector pressure regulator (IPR) effectively and quickly!.
  • IPR Valve Air Test Fitting Tool -- Used to quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult..
  • Fuel Rail Adapters -- High Quality CNC Machined from Billet Brass, allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air..
  • 100% Satisfaction Guarantee -- If you're not 100% satisfied with our Kits, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock

DNJ VG448 Valve Guide for 1993-2016, Ford, Lincoln, Mazda, Mercury, Aviator, B2300, B2500, Blackwood, Continental, Cougar, Crown Victoria, 2.3L-6.8L, V10, V8, L4, SOHC, DOHC, 355cid, Supercharged

  • FITS: 93-16 Ford, Lincoln, Mercury, Mazda 2.3L-6.8L V10, V8, L4 SOHC, DOHC Naturally Aspirated, Supercharged 99Z.
  • FITMENT NOTES: 7.1mm I.D., 12.6mm O.D., 49.1mm O.A.L., Intake and Exhaust, w/o BULLITT, VIN V, w/ BULLITT, Intake.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

DPTOOL Engine Camshaft Timing Locking Tool Kit Compatible with Ford Focus Fiesta Mazada 1.25 1.4 1.6 1.7 1.8 2.0 Twin Cam 16V Engine Ecoboost 1.6 Ti-VCT 1.5/1.6VVT 2.0 TDCi 303-1097 303-748 303-1550

  • Application Engine: Compatible with FORD 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 twin cam 16V engine,1.6 TI-VCT, 1.5/1.6 VVT ECOBOOST engine, replace OEM: 303-1097.
  • Fit Vehicle Include: Compatible with Ford B-Max, C-max , Ford Escape 1.5L, Fiesta, Focus, Ford Mondeo, S-MAX, Galaxy, Ford Transit 2.3L, Ford Transit 1.6L EcoBoost, Puma, Escort/Orion, Tourneo Connect, Mondeo Hybrid, Galaxy, Maverick, Mazda MPV, Mazda Tribute, Mazda 3 etc. if you don't know whether fit your car, you can see your car engine model, or contact us, offer the VIN or engine model, we will serve you wholeheartedly.
  • Function: Used to lock the camshafts in their timed position when engine or rebuild required the cam pulleys to be removed and timed, for lockingthe camshafts in position to allow the variable valve timing pullys to be removed, kit also includdes HP pump sprocket retaining tool required during pump removal/replacement applications.
  • Kit Include: This kit have 9 tools, include: 1 Crankshaft Pulley Alignment Tool.
  • 1 Locks Camshaft Sprockets during Timing Belt service.
Check Stock

EGR Valve Pressure Feedback Sensor - Compatible with 1994-2010 FordMercury Mazda Lincoln - Replaces# F77Z-9J460-AB DPFE15

  • ...us quality control to ensure accurate voltage output. It contains acid/gas resistant sensing element..
  • Function - EGR Valve Position Sensors monitor EGR valve operation to provide same flow as OE calibration, helps to reduce atmospheric pollution due to hydrocarbon emissions and reduce to fuel consumption to improve engine efficiency..
  • Compatible Vehicles - Fit for 1996-1997 Ford Aerostar, 1995-2000 Ford Countour, 1994-2000 Ford Crown Victoria, 1996-2002 Ford E-250 Econoline, E-350 Econoline Club Wagon, 2003-2008 Ford Escape, 1997-2004 Ford Expedition, 1996-1998 Lincoln Mark VIII, 1998-2004 Lincoln Navigator, 1996-2000 Lincoln Town Car and 200+ models, please input your make, model and trim level into the Amazon Garage to make sure this part fits your exact vehicle..
  • Replaces Part Numbers - F77E9J460AA, F77E9J460AB, F77Z9J460AB, F7UE9J460AA, F7UZ9J460AA, DPFE15, 1L3Z9J460AA, 3S4Z9P449AA, 98BB9J460AB, E4ZZ9J460B, F6DZ9J433DD, F7DZ9J433AA, AJ9318211, AJ9318215, This EGR Valve Pressure Feedback Sensor is a direct replacement for Ford, Lincoln or Mazda part, easy to install..
  • 1 Year Warranty - This EGR Exhaust Gas Recirculation Pressure Feedback Sensor comes complete with 1 year warranty. If the part ever fails on your Escort, F-250, F-350, Mark VIII or Town....
Check Stock

KEJSTED EGR Valve Pressure Feedback Sensor DPFE15 Compatible with 94-10 Ford Expedition Focus Escape F150 Mercury Lincoln Town Car Mazda Truck F77Z9J460AB 1L3Z9J460AA F48E9J460BA VP8T EPS4

  • ...350 F-450 | 2000-2007 for ford Focus 2.0L 2.3L | 1995-2007 for Mazda B2500 B3000 B4000 | 1995-2001 for Lincoln Continental 4.6L | 1998-2001 for Mercury Mountaineer 4.0L 5.0L and more. Please See description below for the full vehicle list..
  • Features: EGR valve pressure feedback sensor is one of the components of car engine, the EGR Valve recirculates a portion of the exhaust gas back to the engine cylinders which is monitored by the EGR Pressure Feedback Sensor, helps to reduce atmospheric pollution due to hydrocarbon emissions and reduce fuel consumption,improve engine efficiency and service life..
  • Easy to install: You can replace parts by yourself and solve your vehicle problems, just need to remove the old parts and install the new parts, so as to save you a lot of money and time. Please check youtube video if you have installation problem..
  • Note: Please make sure that the parts, connectors and plugs on our pictures are the same as your old products before ordering, to avoid wrong purchases, 100% undergo a strict quality tested before shipping. If the EGR Pressure Sensor fails simply contact us for a replacement or refund, we will reply you within 12 working hours..
Check Stock