Categories

Best Ford Inch Bearing

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • ...including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
  • CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • includes (1) 3-eye round clutch plate sander arbor, (3) 1/4-inch – 20 Hex screws, (2) 3/8-inch – 16 Hex....
Check Stock

Carrier & Pinion Bearing Puller Dana 30, 40, 60, 70, 80, Ford 10.25 Clamshell Design

  • GXL Carrier & Pinion Bearing Puller Dana 30, 40, 60, 70, 80, Ford 10.25 Clamshell Design.
  • This tool is not used for removing pinion bearings on Dana 80..
  • Double heat treated for extreme strength.
  • Small(yellow), Medium(Black) and Large(White) Clamshells with Bearing Puller Tool Stand and Two Screw Assembly..
Check Stock

ECCPP New Front Wheel Hub Bearing Assembly 515003 fit for Ford Explorer (Sport Trac) Ranger, Mercury Mountaineer, Mazda B3000 B4000 4WD w/ABS 5 Lug 3 Flange Bolt 2pcs

  • COMPATIBLE VEHICLES - wheel hub bearing assembly for 1995-2001 Ford Explorer front wheel hub,2001-2005 Ford Explorer Sport Trac hub bearing,2000-2009 Ford Ranger front wheel bearing, 2001-2002 Mazda B3000 front bearing,2000-2009 Mazda B4000 bearing assembly,1997-2001 Mercury Mountaineer hub assembly.
  • FEATURES - ECCPP'S wheel hub bearing assembly fits for the front location, 5 Lugs with ABS, 3 Flange Bolt, replace OE 515003.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protectiv....
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TREMEC TRANSMISSIONS,TKO 500,600

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with Ford Tremec Transmissions (Ram Part #78132)..
  • Works with Ford Tremec Transmissions, including TKO 500 and TKO 600.
  • Includes a replacement transmission collar to install on your Tremec..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock

7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit for Garrett TP38 1994-2003 Ford Powerstroke 446579-0001 170293-360° Thrust Repair Kit - 7.3L Turbo Rebuild Kit By TOPEMAI

  • 7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit For 1994-2003 Ford Powerstroke,Replaces 170293,446579-0001, 817-1004-002F,....
  • 7.3L Turbo Compressor Wheel Rebuild kit for 2003 Ford E-350,2003 Ford E-350 Club Wagon,2003 Ford E-450 Super Duty,2003 Ford E-550 Super Duty,2000-2003....
  • 7.3L Turbo Rebuild kit for 1994-1998 Ford F-250,1994-1997 Ford F-350,2000-2003 Ford F650,2000-2003 Ford F750,1994-1997 Ford F Super Duty,1999-2003....
  • Turbo Compressor Wheel kit for ford AKA gtp38 turbo compressor kit,Gtp38 turbo upgrade,7.3 turbo wheel,Garrett tp38 turbo rebuild.This Kit Has a 360....
  • Package Include:7.3L Turbo Compressor Wicked Wheel, Upgraded 360 Degree 5 Oil Port Brass Thrust Bearing, Thrust Collar, Thrust Spacer, Front and Rear....
Check Stock

Tapered Axle Bearing and Seal Replacement for 9 Inch Big Fits Ford Hou

  • Replacement axle bearing for big bearing new style Ford axles commonly referred to as the Torino bearing or "Set 20".
  • Tapered bearing design supports greater loads than old style roller bearings.
  • A new bearing retainer collar is included to ensure no movement of the bearing when in use.
Check Stock

Front Wheel Bearing Seal Assembly Replacement fit for 2003 2002 2001 2000 1999 1998 1997 Ford F150 1997-1999 F250 2004 F150 Heritage 1997-2002 Expedition

  • Fit for 97 98 99 00 01 02 03 Ford F150 1997-1999 F250.
  • Fit for 04 Ford F150 Heritage 1997-2002 Expedition.
  • Package include:4x Wheel Bearing, 2x Seals.
  • Front Wheel Bearing and Hub Assembly Kit.
  • Easy Installation & Maintenance, Enjoy Smoother Ride !.
  • 1 Year WARRANTY ! Please CHECK FITMENT before Purchase.
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

COMP Cams 300 Professional Two-In-One Harmonic Balancer Puller/Installation Tool

  • Absolute inchmust inch for serious engine builders.
  • Features a hardened threaded shaft with alloy nut combined with a roller thrust bearing puller plate.
  • Includes various size puller bolts for most uses.
  • Kit fits GM, Ford and Chrysler crankshafts.
  • Black oxide finished with included storage box.
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

GTP38 TP38 Turbo Rebuild kit for 1994-2003 7.3 Powerstroke

  • Upgraded 360 Degree Copper Bar Thrust Bearing (Copper Dissipates Heat Better).
Check Stock

Seven Mother Fuckin’ Three Diesel Powered Pullover Hoodie

  • Upgraded 360 Degree Copper Bar Thrust Bearing (Copper Dissipates Heat Better).
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TOPLOADER TRANSMISSIONS & STOCK C.

  • Brand New Ram Hydraulic Throwout Bearing Kit (Ram Part #78136)..
  • Works with Ford Toploader Transmissions that have a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380" * Toploaders either have an 1 1/16"-10 spline or 1 3/8"-10 spline input shaft.
  • This bearing isn't big enough to work with the 1 3/8"-10 version. * In addition, some toploaders with an 1 1/16"-10 spline shaft have a larger retainer, so it's a good idea to measure the retainer collar to make sure it is 1.375" or less..
  • Includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock