OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Electric Fuel Pump SP2007H for 1990-1996 Ford F150 F250 F350 1997 F-250 HD After Axle Tank Steel Tank 18 Gal Tank

  • 【Warranty】This fuel pump comes with 60 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise. If you don't like it, just....
  • 【Interchange Part No.】SP2007H, F4TZ9A407C, F6TZ9A407CA, F6TZ9A407CC, PFB3..
  • 【Application】This fuel pump module assembly kit is especially designed for 1990-1996 Ford F-150 F-250 L6-4.9L & V8-5.0L & V8-5.8L.
  • 【Package】Includes Fuel Pump, Sending Unit, Float, Fuel Pressure Regulator, Fuel Strainer, Tank Seal and Wire Harness..
  • 【Compatibility】Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict....
Check Stock

DPTOOL Engine Camshaft Timing Locking Tool Kit Compatible with Ford Focus Fiesta Mazada 1.25 1.4 1.6 1.7 1.8 2.0 Twin Cam 16V Engine Ecoboost 1.6 Ti-VCT 1.5/1.6VVT 2.0 TDCi 303-1097 303-748 303-1550

  • Application Engine: Compatible with FORD 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 twin cam 16V engine,1.6 TI-VCT, 1.5/1.6 VVT ECOBOOST engine, replace OEM: 303-1097.
  • Fit Vehicle Include: Compatible with Ford B-Max, C-max , Ford Escape 1.5L, Fiesta, Focus, Ford Mondeo, S-MAX, Galaxy, Ford Transit 2.3L, Ford Transit 1.6L EcoBoost, Puma, Escort/Orion, Tourneo Connect, Mondeo Hybrid, Galaxy, Maverick, Mazda MPV, Mazda Tribute, Mazda 3 etc. if you don't know whether fit your car, you can see your car engine model, or contact us, offer the VIN or engine model, we will serve you wholeheartedly.
  • Function: Used to lock the camshafts in their timed position when engine or rebuild required the cam pulleys to be removed and timed, for lockingthe camshafts in position to allow the variable valve timing pullys to be removed, kit also includdes HP pump sprocket retaining tool required during pump removal/replacement applications.
  • Kit Include: This kit have 9 tools, include: 1 Crankshaft Pulley Alignment Tool.
  • 1 Locks Camshaft Sprockets during Timing Belt service.
Check Stock

Gas Tank Fuel Filler Neck Hose - Fits Ford Ranger 1993-1997 and Mazda B2300, B3000, B4000 1994-1997 Non - Flareside and Splash Model - Replaces F47Z9034P, AL5Z9034A, AL5Z9034C, F47Z9034, ZZM042210C

  • REPLACEMENT FUEL FILLER NECK and HOSE - Located on the side of your truck the fuel filler neck tube and hose allows you to pump gas into your truck's gas tank. If your Ford Ranger or Mazda B Series pickup is leaking gas while you're pumping gas your fuel filler neck and hose should be replaced. Also if the gas pump is constantly clicking off while pumping gas into your truck your fuel filler neck should also be replaced..
  • FITS THESE VEHICLES (108" or 125" Wheel Base) - Ford Ranger 1993, 1994, 1995, 1996, 1997 and Mazda B2300, B3000, B4000 1994, 1995, 1996, 1997 - Includes model years 93, 94, 95, 96, 97 - DOES NOT fit Flareside or Splash Models.
  • OEM FIT, QUALITY, and FINISH - This Fuel Filler Neck is a direct replacement for the factory Ford assembly. While this is NOT a genuine Ford or Mazda part it is made to the same specifications. Featuring a rugged powder coated finish, a reinforced rubber hose, and stainless steel hose clamps this filler neck will last a lifetime..
  • REPLACES OE PART#s - F47Z9034P, AL5Z9034A, AL5Z9034C, F47Z9034, ZZM042210C, 577-902 found on the Ford Ranger and Mazda B2300, B3000, & B4000 Pickup models..
  • ONE YEAR WARRANTY - If you experience any issues with the Fuel Filler Neck and Hose on your Ford Ranger or Mazda B series pickup, s....
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • ...AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
  • the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • ...AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
  • the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Check Stock

Chap Performance Compatible with SBF 289 302 Serpentine Pulley Conversion Kit Alt & Saginaw PS Electric WP Ford 2 - Electric Water Pump. 4 Bolt damper 1969+

  • COMPATIBLE WITH FORD PICK UP TRUCKS 1977 1/2+.
  • P SERIES SAGINAW KEYWAY POWER STEERING PUMP..
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

Carter Universal Electrical Fuel Pump Automotive Replacement 6V (P4259)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
Check Stock

Lisle 43300 Pneumatic Fan Clutch Wrench

  • Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
  • Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L....
  • Use with an air hammer. Includes blow molded storage case..
Check Stock

Fuel Pump Assembly for Ford F-150 F-250 F-350 1990-1997 F Super Duty F53 with 18 Gallon Steel Tank

  • YHTAUTO Fuel Pump Module Meets OEM Specifications, Direct Replacement to Original Parts.
  • Ford F-150 5.0L/5.8L 1990-1996, 4.9L 1990-1997---【for 18 Gallon After Axle Steel Tank】.
  • Fits Ford F-250 4.9L/5.0L/5.8L/7.5L 1990-1996.
  • F-250 HD 5.8L/7.5L 1997---【for 18 Gallon After Axle Steel Tank】.
  • Fits Ford F-350 4.9L 1990-1996, 5.0L 1990-1993 1995-1998, 5.8L/7.5L 1990-1997---【for 18 Gallon After Axle Steel Tank】.
  • Reference Number: SP2007H, F6TZ9A407CC, PFB3, F4TZ9A407C, F6TZ9A407CA.
Check Stock