Categories

Best Forged Bar

QCAA Heavy Duty Solid Brass Barn Door Hook Latch & Eye, 4\

  • Hook Base: Heavy Duty Brass Construction, Well Riveted & Well Co2 Welding to Prevent Falling Out.
  • Unique Match: Bigger Hook Base with Elegant Eye Base.
Check Stock

Zephyr Pro-50 Eliminator 32 Ounce

  • 1 - Pro 25 Easy Kut "Forged Wheel Formula" 16oz.
  • 1 - Primary Cutting Tripoli Rouge Bar, 1 - Moss Green Rouge Bar.
  • 1 - Blue Moon Rouge Bar, 1 - 2" Tapered Goblet.
Check Stock

Mayhew 61366 Dominator Pry Bar Set Curved 5-Piece 3

  • Includes: 40150 1/2 x 12" Ladyfoot Bar, 40152 5/8 x 16" Ladyfoot Bar, 40154 3/4 x 21" Ladyfoot Bar.
  • Rocking head allows the operator to pry in tight spaces, while the pointed end is used for alignment.
  • The solid forged head is specially designed for ultimae strength when prying.
  • Black oxide finish provides additional rust protection.
Check Stock

Mayhew Tools - MA60150 60150 3-Piece Ladyfoot Bar Set Black

  • Includes: 40150 1/2 x 12" Ladyfoot Bar, 40152 5/8 x 16" Ladyfoot Bar, 40154 3/4 x 21" Ladyfoot Bar.
  • Rocking head allows the operator to pry in tight spaces, while the pointed end is used for alignment.
  • The solid forged head is specially designed for ultimae strength when prying.
  • Black oxide finish provides additional rust protection.
Check Stock

Emeril Lagasse 9-Piece Forged Cutlery Knife Block Set - Emeril Lagasse Cutlery Set - Perfect Kitchen Knives for Produce, Meat, and Bread

  • Forged vs Stamped – A forged knife is made out of a single bar of steel that is hammered into shape by an expert craftsman. On the other hand a stamped knife is cut out from a sheet of steel and heated by a machine. While stamped knives are the cheaper option, they cannot compare to the quality and efficiency of forged knives..
  • Chef’s Professional Quality Kitchen Knives – This Emeril Lagasse knife set is made with superior stainless steel for a super sharp cutting edge. Cut effortlessly through tough fruit, thick meats, and dense vegetables. Having a well-equipped kitchen will make cooking more enjoyable and efficient..
  • Durable & Safe 9-Piece Set – Comes with 8″ Chef Knife, 8″ Serrated Bread Knife, 7″ Santoku Knife with Cullens, 7.75″ Slicer Knife, 5.5″ Prep Knife, 5″ Utility Knife, 3.5″ Paring Knife, Kitchen Scissors, & Round Rubberwood Block..
  • Quality is King – Forged knives are made with time and care and it shows in their outstanding quality. Forged knives are more comfortable, more efficient, and overall higher quality than stamped knives. Additionally, forged knives have higher blade retention than stamped knives so you can keep your knives sharp longer..
  • Easy Hand Wash – As with most high-end, sharp silverware, do no....
Check Stock

BTSHUB Torsion Bar Unloading Tool Key Removal Compatible with GM Chevy Ford Dodge Drop Forged Heavy Duty

  • 【Torsion Key Tool】7/8 inch diameter threads.
  • Large C-frame opening: to accommodate beefier torsion bars.
  • 【Forged steel construction】Torsion bar unloading tool was made for use on trucks with heavy duty chassis and a larger torsion bar.
  • 【High Performance】 Designed to hold the torsion bar while you make adjustments to your vehicle.
  • 【Advantage】Torsion key unloading tool can be positioned on the frame and the torsion bar mount.
  • 【Applications】 Torsion Bar Unloading Tool Key is Compatible with GM.
Check Stock

Park Tool SWB-15-3/8 Drive Breaker Bar,One Size,901920-01

  • The 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º..
  • Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners..
Check Stock

GEWAGE Bike Stem - 130 Degree Adjustable Bicycle Stem- 75mm 90mm 130mm Handlebar Stem Riser for 31.8(1-1/4\) Handlebars, Suitable for Most of Mountain Bike, Road Bike, BMX

  • 【BIKE STEM】 - This bike stems features a precision 3D shaped forged shaft interconnected with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. DIal-in the perfect height for your Handlebars!.
  • 【BIKE STEM SIZE】- Sleek aesthetics combine with performance in this Handlebar Stem Suitable for 31.8mm (1-1/4") handlebars, front fork stem diameter 28.6mm (1-1/8") ,Length: 75,95,130mm (center distance of the center of angle disk ),Weight: 320g,Please Confirm Your bike Size Before Your Purchase..
  • 【ADJUSTABLE ANGLE】- -40 angle to +90 angle adjustable according to your habits, the Adjustable Stem It can help you raise or lower the height of the handlebars to improve your position or comfort as you ride. so as to obtain a more comfortable riding experience.
  • 【EASY INSTALLATION】- The bicycle stem is easy to install, Just connect up the bike stem riser to original front fork stem. Four bolt bar clamp holds bar securely in position. Increasing the friction between the card slot and the handlebar can effectively avoid the impact of vibration and loss of control during riding..
  • 【3D FORGED ALLOY】- Bicycle handlebar stem Made of high quality 3D Forged aluminum alloy, sturdy and durable, not easy to deform....
Check Stock

Spank Spoon 800 (Gold, 800mm), Rise 40mm Unisex Adult Hanger, Mountain Bicycle Handlebar, Aluminium Alloy Handlebars, Bicycle Handlebars, Steady Handlebar

  • FURTHER IMPROVED STRENGTH OF THE HANGER: Our hangers are forged from top quality, specifically forged aluminium MGRs. We do this to give the hanger a new wider base creating even more strength to support high weight loads..
  • IMPACT ENDS: The Impact End caps the ends of the straight wall and reduces the risk of collapse in extreme hits and when force is applied on the thinner section of the bars..
  • DUAL EXTREME GRADUAL TAPER TECHNOLOGY: The Dual Extreme Gradual Taper process starts with XGT at the bar clamping zone, through the bend zones, to the thinnest areas at the control zone and back to thicker bar ends..
  • HIGH-QUALITY BUILT: We craft our handlebars with the serious rider in mind, producing an affordable, high-quality product that you can depend on..
  • CNC BENDING: Spank uses advanced, automated 3D CNC bending machines to bend the bars. This method gives them a better consistency in size and shape, resulting in lighter weight, more powerful bikes that can withstand damage..
Check Stock

Bessey Bar Clamp Set, F-Style Sliding Arm

  • Price For: Each Item: Bar Clamp Set Swivel Type: Replaceable Application: Heavy Duty, Maintenance, Welding, Assembly, Construction and General Purpose Clamping Handle Material: Forged Steel Type: F-Style Sliding Arm Bar Material: Cold Drawn, Heat Treated, Tempered Alloy Steel Includes: (2) Mfr. No. GS12-8K, (2) Mfr. No. GS20K, (2) Mfr. No. GS30K Pad Type: Standard.
  • Country of Origin (subject to change): Germany.
Check Stock

Mueller-Kueps 745 100 Wrench Extender

  • Provides extra torque to loosen rusted bolts, stuck fasteners or over-tightened nuts easily and safely.
  • Maximum leverage for hard-to-reach spaces.
  • fits most hex, Allen key, TX, XZN and socket wrench tools.
  • Safer than using a cheater bar, snipe, extension pipe or other improvised torque multiplier tool.
  • High quality mechanic’s tool, made from ultra-tough drop forged steel.
  • 13.4-inch length (340mm), fits up to 1-inch (26mm) size wrenches.
Check Stock

KUNTEC Torsion Bar Unloading Tool Heavy Duty Torsion Key Tool with C Frame Compatible for GMC Chevy Ford Dodge Car Truck Auto

  • FUNCTION: Torsion bar removal tool helps you remove and replace your vehicle’s torsion bar.
  • it removes the spring from the suspension system to accommodate easy parts replacement and keep your car in optimal condition.
  • EASY TO USE: Features larger 7/8” diameter anvil casting threads, this Torsion Bar Unloading Tool will make quick and easy work of your suspension job.
  • COMPATIBILITY: This torsion key tool easily removes or holds the torsion bar in place on a wide variety of vehicles, compatible with a range of models from Chevy, GMC, Dodge, Cadillac, and more.
  • QUALITY: This torsion bar tool is built with heavy-duty forged steel, made for use on trucks with heavy duty chassis and a larger torsion bar.
  • ATTENTION: This torsion bar unloading tool can only be used with hand wrench, do not use the impact driver. Grease the threads before using and get the front tires completely off the ground.
Check Stock

Dorman 927-100 Front Suspension Stabilizer Bar Compatible with Select Models (OE FIX)

  • Improved design - this suspension stabilizer bar has been redesigned for greater durability than the failure-prone original equipment part.
  • Upgraded materials - this stabilizer bar is made from solid forged steel to resist failure caused by weakness in the original part's hollow tube construction.
  • Compete solution - new bushings and installation hardware are included with the stabilizer bar for a complete repair.
  • Quality tested - this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock