Categories

Best Forged Brass Bibcock

VOLT Cold Forged Brass 12V in-Grade Bronze Well Light with Ground Stake

  • UL/cUL LISTED - VOLT products are UL Listed for safety.
  • most competitors' landscape lighting products on Amazon are not..
  • PROFESSIONAL GRADE Forged brass faceplate for maximum durability. Cold forged brass body, which is less porous than cast brass and better suited for water-related conditions. Pre-aged polished antique bronze finish that maintains its beauty over the lifetime of the fixture. PVC ground stake and 4-foot lead wire included..
  • FULLY SUBMERSIBLE Wire glands ensure that water cannot get into the fixture from one of the most common points of failure. Pressure fit gaskets ensure a tight seal that will keep water out of the internal housing. Raised lens so water cannot puddle. Absolutely waterproof, with an IP rating of 68..
  • LAMP READY - Designed for replaceable MR16 LED bulbs (not included)..
  • LIFETIME WARRANTY VOLT Lighting extends an industry-best lifetime warranty on its brass fixtures. Using state-of-the-art components, our professional grade products are built to the highest standards of construction and performance, and are field tested for durability and ease of installation..
Check Stock

Aviano - 2 Pack Edge Pull for Closet, Bathroom, Laundry and Hallway Doors - Satin Nickel Finish

  • DURABILITY: Flush ring pulls are crafted from solid Forged Brass for maximum strength and durability..
  • MATERIAL: Solid forged brass. Narrow design eliminates installation problems on thin door conditions.
  • USAGE: Use with closet, bathroom, laundry and hallway pocket doors. Large opening in the pull makes open and closing easy. Spring loaded edge pull returns lever flush with face plate.
  • MEASURMENT : 3/4”W x 3 7/8"H x 1 5/8" projection..
Check Stock

Lead-Free Forged Brass Air Compressor In-Line Ball Shut Off Valve, Quarter Turn, 1/4\ Male NPT (MNPT) X 1/4\ Female NPT (FNPT) Qty: 1

  • Forged for added strength and durability. Forged brass is stronger and more expensive than cast brass..
  • For your health and safety, this fitting is made of lead-free brass which contains less than 0.25% lead. The ball inside the valve is made of chrome plated lead-free brass. Seal materials are PTFE plastic and NBR rubber..
  • 1/4" Male NPT (MNPT) X 1/4" Female NPT (FNPT) connections. High-capacity full-port design reduces pressure drop. Quarter-turn operation with a long handle makes this ball shut-off valve very easy to operate. Locknut resists loosening under vibration..
  • Suitable for compressed air, water, and oil. Able to control flow in either direction. Pressure rating: 200 psi..
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...ure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an esse....
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ...s you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching y....
Check Stock

Knife Blanks 015 12" Overall Bowie Fighter Knife Blade

  • HANDMADE DAMASCUS STEEL FLINT KNAPPED FINISH HAMMER FORGED PATTERN WELDED DAMASCUS STEEL ROCK PATTERN BLANK BLADE FIXED BLADE FOR KNIFE MAKING WITH BRASS GUARD.
  • THIS UNIQUE FORGED BLANK BLADE IS TOTALLY HAND MADE .BLADE IS HAND FORGED "PATTERN WELDED" DAMASCUS MULTIPLE LAYERS WITH ABOVE 176LAYERS OF 1095 AND 15 N 20 HIGH & LOW CARBON TOOL STEELS.
  • OVERALL LENGTH 13 INCH *BLADE LENGTH 8 INCH, BLADE THICKNESS, 5 MM.
  • DAMASCUS STEEL BLADES KNIVES REQUIRE SPECIAL CARE. WHEN NOT IN USE, STORE KNIVES AND LEATHER SHEATHS SEPARATELY BECAUSE LEATHER DOES ABSORB MOISTURE AND CAN RUST YOUR BLADE.
  • AGE RESTRICTION: WE DON’T SELL KNIVES TO ANY ONE WHO IS UNDER AGE 18.
Check Stock

Don t Need To Kno Yo Name feat Katana

  • Musashi Hand Forged Katana, Dasshutsu 脱出 Design.
  • 1060 high carbon steel with maru-kitae forging method.
  • Real hamon, Razor Sharp blade, Brass tsuba and accessories.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ...and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

Shinwa Dogwood Flower Katana with Scabbard - 1045 Carbon Steel Blade, Cast Metal Alloy Tsuba, Brass Habaki, Genuine Rayskin - Length 39 1/2"

  • This Shinwa is an exceptional masterpiece from its exquisitely hand-forged blade to its expertly crafted cast metal pommel.
  • It has a hand-forged, razor-sharp, beautifully bronze hued, 27 1/4” 1045 carbon steel blade that extends from a brass habaki.
  • The sturdy wooden handle is wrapped in genuine rayskin and then wrapped in black leather in a traditional style.
  • The sword has a dogwood flower open-work tsuba, crafted of metal alloy and finished in an antiqued brass color, complementing the handle.
  • The 39 1/2” overall katana slides, just like a glove, into a red lacquered wooden scabbard with black mottled accents.
Check Stock

PH PandaHall 1 Pound 30mm Brass Solid Brass Hammer with Wood Handle for Jewelry Craft Making Tools

  • Brass Head: Drop forged brass head is spark resistant.
  • absorbs impact and reduces damage on surface being hit.
  • can be used safely in combustible environments..
  • Wooden Handle: The hammer handle is made of high quality wood. The precision polishing process makes it feel more comfortable. With the reasonably designed length, this hammer is easy to operate..
  • Precision Machined: They are hot forged, machined with high precision and heat treated to provide the best combination of hardness and resistance to blows..
  • Tight Connection: This hammer adopts special inlay process to make the connection between the hammer head and the hammer handle closer and not easy to fall off, even if it is beaten vigorously..
  • Wide Usage: Great for jewelry making and DIY projects.
  • Ideal jewelry tools for forming, jewelry repairs, flatten wire or other metal pieces..
Check Stock

SHZBZB Swords Fantasy Swords for Movie Prop Jon and Snow's Sword Stainless Steel Blade Golf Cap Wooden Sheath PU Leather

  • This knife is 100% Pure Hand Forged and Hand Sharpened. final assembly are finished manually, so you can rest assured to buy..
  • Traditional Forging Method: is Made in LongQuan, China Where Has a 2600-Years History of Manufacturing Sword, Completely Sword with Stunning Workmanship The knife blade is thoroughly tempered and fabricated by making, hot forging, shoveling, deadening, grinding, heat treatment, tempering, the blade is hand polished with multiple grades of sharpening stones which. High Hardness And Very Sharp. But, Please Be Carful When Practing and Palying..
  • Tsuba and other fittings: Most fittings are made by brass. For Tsuba, we use coper, or brass, or iron, or alloy. It depends on each tsuba. Handle and Scabbard : Wooden or other specified. Most of the handles are covered by fish skin and Japanese cotton Ito..
  • we can free for you carved the name or the letters you want on the blade. Make your collection or gift to friends more meaningful..
  • Swords from Hand forged are all handmade in traditional ways by skilled and experienced swordsmiths. Hand forged strives for making the highest quality swords in the past decades. with Stunning Workmanship. Which makes us one of the best sword sellers in this industry. We believe in keeping customers hap....
Check Stock

KOREAN BUDDHIST MONASTERY CYMBALS BUDDHIST CYMBAL_BARA

  • The item will be shipped directly from Seoul Korea within 1day.
  • 1 pair of Hand-forged brass cymbal (Bangjja).
  • Material : Korean high quality brass + Silver.
Check Stock

Draft Beer Faucet with Brass Lever- Chrome

  • Body made of chrome plated forged brass..
Check Stock