Categories

Best Forged Brass Fitting

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Vis Brass CA360 Flared Tube Fitting, SAE 45 Degree Flare, Cap, 3/8\ Tube OD (Pack of 5)

  • Cap fitting for closing the end of a male-threaded flare tube.
  • Forged nuts for refrigeration applications.
  • CA360 brass for strength and resistance to corrosion.
  • Operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C).
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

3/8 Hose Barb to 1/2 Male NPT 90 Degree Elbow Brass Hose ID to Pipe Threaded L Right Angle Fitting Fuel/Air/Water/Gas/Oil WOG 2 Pack

  • ✅ CONTENTS: Two 3/8-inch barb to 1/2-inch NPT male 90-degree brass elbows, use it to change the flow direction from vertical pipe to horizontal hose or the opposite way.
  • ✅ APPLICATIONS: Suitable for use in home, automotive, nautical, industrial, and commercial applications. Brass elbows are perfect to made air, water, fuel, coolant, gas and oil connections. NOT RECOMMENDED FOR POTABLE WATER USE. Please Note: NPT Size DOES NOT directly correspond to actual dimensions of the thread. 1/2 NPT nominal size works with a 0.84" outside diameter pipe.
  • ✅ HIGH-QUALITY HEAVY-DUTY BRASS: Made completely of solid, durable CA377 forged, machined brass that is barbed from a solid brass stock using the CNC machine center. High quality deep threads will prevent leaks and corrosion. These pieces are ultrasonically cleaned before leaving the factory, so their surfaces do not have any metal shavings and dust, and no organic oil adheres to the surface. This pipe fitting provides full and secure flow and withstands high pressure..
  • ✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.
Check Stock

HYLDG 3-Way Female Brake Line Tee for 3/16\ Tube for Inverted Flare Fittings (All 3/8\-24 Threads) (Pack of 3)

  • 3/8-24 Threads (standard 3/16" tube fitting size).
  • Forged tee with three openings for connecting and branching three pipes with different ends..
  • Made from brass for higher corrosion resistance than steel..
  • Pack of 3, you can use them for your Farm vehicle repair, old vehicle repair, and so on..
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

QCAA Heavy Duty Solid Brass Barn Door Hook Latch & Eye, 4\

  • Hook Base: Heavy Duty Brass Construction, Well Riveted & Well Co2 Welding to Prevent Falling Out.
  • Unique Match: Bigger Hook Base with Elegant Eye Base.
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

  • 【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
  • 【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
  • 【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

LIONMAX Barb Splicer Mender 4 PCS, Brass Barb Union Hose Fittings, 5/16 Inch to 5/16 Inch Barb Hose ID, with 8 Hose Clamps, for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock