Best Forged Brass Fittings

SharkBite U256LFCP 3/4 Inch 90 Degree Elbow Push to Connect Pipe Fitting, 10 count, Brass

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit connectors.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines.
  • PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: All SharkBite valves, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

Winterize RV, Motorhome, Boat, Camper, and Travel Trailer: Air Compressor Quick-Connect Plug To Male Garden Hose Faucet Blow Out Adapter with Valve (Lead-Free Brass)

  • ...es (RV), motorhome, camper, boat, watercraft, and travel trailer by blow out method. This is a safer, healthier, and environmentally friendlier winterization tool when compared with those winterizing kits that use antifreeze..
  • Flexible hose allows the adapter to access tight spaces and minimizes stress on pipes and fittings. Pre-assembled length: 11.5 inches approx. Pressure rating: 250 psi. 100% outdoor rated, virtually indestructible, impervious to water and oil..
  • Hose: Flexible Reinforced Synthetic Rubber, water and oil resistant (Insta-Grip hose, made in USA).
  • For your health and safety, the fittings are made of lead-free brass, certified to contain less than 0.25% lead. Always wear safety goggles when handling or using compressed air..
  • This winterization tool is made from the highest quality parts. The shut-off valve is made from forged brass (not brass casting) for extra strength and durability. If you are looking for a heavy duty tool that lasts a lifetime, this one is for you! This blowout adaptor may also be used to winterize sprinkler system, drip irrigation system, soaker hose, spigot, faucet, sillcock, water garden hose and hose bibb where applicable. Assembled in Wichita, Kansas, USA with domestic and foreign parts..
Check Stock

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

  • SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed horizontally or vertically.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.
Check Stock

SharkBite 1 Inch Check Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U2020-0000LFA

  • INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free.
  • HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

  • SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock