Categories

Best Forged Steel Butterfly Valve

Powerbuilt 20 Ton Bottle Jack with 9-11/16 inch to 17-5/8 inch lifting range, portable hydraulic car jack with carrying case- Red 640503

  • forged iron saddle with a lifting range of 9-11/16 in. to 17-5/8 in.
  • Forged steel saddle and cast handle socket for maximum height.
  • Pin style release valve for easy operation, extension screw provides added lift height and meets or exceeds ANSI standards.
  • Made to be the most reliable tools in the market today.
  • Extension screw provides added lift height.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Sanitary Butterfly Valve Repair Kit, Silicone Seat w/ (2) Bushings - for 1-1/2\ Valves

  • Size (spec): for 1-1/2" Sanitary Butterfly Valve.
  • This sanitary butterfly valve repair kit is mainly suitable for DERNORD butterfly valve.
  • Temperature Rating (spec): 15°F thru 200°F.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

Forged Stainless Steel Diaphragm Valve 316l Tri-Clamp Diaphragm Valve Silicone Seal 1.5 Inch for Controlling Ultra-Pure Sterile Corrosive Or Abrasive Fluids

  • ♛ SPECIFICATION - medium temperature: -10°C~+150°C.
  • sealing material: EPDM, PTPE, silicone resin.
  • surface polishing accuracy um: external Ra .
  • ♛ CONTROL FLUID - This forged/cast stainless steel diaphragm valve is suitable for controlling ultrapure, sterile, corrosive or abrasive fluids..
  • ♛ WORKING PRINCIPLE - stainless steel diaphragm valve is sealed from harsh fluids by high-quality neutral chemical diaphragms for a variety of applications..
  • ♛ APPLICABLE PLACES - The stainless steel diaphragm valve can be used in different fields such as food, beverage, pharmaceutical, biotechnology, semiconductor industry and so on..
  • ♛ THE PACKAGE CONTAINS - 1 valve.If you have any questions, you can contact KOUGER customer service, we will give you a satisfactory answer within 24 hours!.
Check Stock

INTBUYING Dry Powder Mixer 100L Particle Blender Powder Mixing Machine Granual Mixer 110V 26.5Gal

  • 【Wide Application】The dry powder mainly used for mixing and stirring various powdery, granular, flake, lump and viscous materials in feed, chemical, metallurgical, food and other industries..
  • 【Well Mixed】The barrel and the inner mixing blade can rotate at the same time, and the rotation direction is opposite to achieve the purpose of more uniform mixing. The barrel can be turned over 360 degrees, and there is no dead corner when mixing..
  • 【Controllable Speed】The butterfly valve type discharge port is convenient for discharging and can control the speed of discharging. The butterfly valve rubber gasket has good sealing effect and does not leak..
  • 【Durable and Stable】Thickened stainless steel cylinder, anti-corrosion, long service life.
  • high-quality copper core motor, strong power, stable and durable..
  • Voltage:110V,2.2kw.Double chain design with thicker chain and sprocket.Size: 110CM*80CM*102CM(43.3”*31.5”*40.1”)..
Check Stock

Kegco bf ebdck-nt Conversion Kit

  • .... The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished ....
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

  • Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...ure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
  • 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an esse....
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

Butterfly Valve Wafer PN16, Body/disc - cast Iron, seat - EPDM (250°F / 120°C) with Electric Actuator 110V ON/Off (6\ (DN150))

  • Wide Use: It’s a Motorized Butterfly Valve. Suitable for food, pharmaceutical, beverage, cosmetics and chemical industry..
  • Material: High quality 304 Stainless Steel material, strong sealing. Strong acid resistance, not easy to corrosion. Long service life.
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

  • ...o display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

DERNORD 2 Inch Tri Clamp Sanitary Butterfly Valve, Pneumatic Actuator Valve SS304 with Single Acting

  • Pneumatic Butterfly Valve Material: Stainless Steel 304.
Check Stock