Categories

Best Forging Steel Flanges

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

16 Pieces Coin Ring Making Forging Balls SourceTon Stainless Steel Balls Assortment of 3/4 Inch 5/8 Inch 9/16 Inch 1/2 Inch 7/16 Inch 3/8 Inch 5/16 Inch and 1/4 Inch

  • 304 STAINLESS STEEL- Our coin ring balls are made of 304 stainless steel, hard, durable and never rusty..
  • MOST POPULAR SIZES- The package includes 8 sizes of Forging Balls: 3/ 4 inch, 5/ 8 inch, 9/ 16 inch, 1/ 2 inch, 7/ 16 inch, 3/ 8 inch, 5/ 16 inch and....
  • SMOOTH SURFACE- The surface of steel balls are round and smooth made by high precision machine..
  • GREAT FOR MAKING COIN RING- The coin ring balls can be widely applied, especially for forging coin ring..
  • PACKAGE INCLUDES- There are 8 sizes of Forging Balls and 2 pieces for each sizes in the package..
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

SYKRSS 3.0 Mild Steel V Band Clamp Flat Flange Kit Assembly

  • Material-Each assembly consists of two Mild Steel flanges and one 304 Stainless Steel V-band clamp. The V-band clamp design allows for a gasket free....
  • Application- The V-Band Clamps makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes and the....
  • Excellent Sealing-The V-band clamp applies uniform force around the flange maximizing the seal potential of the flanges, Once tightened, friction....
  • The 3.0" v band clamp fit for 3 Inch O.D. pipe. Of course, we can't only provide you with mild steel V band flange clamp kit, also have stainless....
  • This item is not vehicle specific. It is compatible with a wide range of applications. Please review the specifications and verify compatibility prior....
Check Stock

10.75 inches long Kukri point Blank blade, hand forged Ladder pattern Damascus steel hunting knife blade, knife making supplies, 3 Pin hole scale, 6" sharp cutting edge

  • Overall 10.75 inches Long hand forged full tang Ladder pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

ZONKIE 1-Speed Bicycle Chain 122 Links

  • Easy to install: chain joints for the magic buckle, easy to disassemble, easy to clean, reusable  .
  • Strong Rally: Special forging steel, repeated forging, strict control of materials to ensure the strength.
  • Smooth lubrication: surface polishing, internal oiling.
  • Accurate matching: professional equipment test spacing, professional and technical test data  .
Check Stock

Knife Making Damascus Steel Blank Blade 7 inches Long Hand Forged Skinning Knife with 3 Pin Hole & an Inserting Hole Space 2.75 inches Cutting Edge 3.5 Scale Space

  • Overall 7 inches Long hand forged full tang Damascus steel blank blade.
  • 2.5 inches long cutting edge. Up to standard Pocket skinning and compact Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Walker Exhaust 56039 Exhaust Resonator and Pipe Assembly

  • EASY TO INSTALL -- Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation.
  • RESISTS CORROSION -- Durable aluminized steel construction and helps reduce corrosion.
  • FACTORY SOUND -- OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality.
  • STRONG AND DURABLE -- Features thick OE-style flanges, hardware and brackets for strength.
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY -- Engineered to fit, perform and sound like the original system.
Check Stock