Categories

Best Forging With Machining Parts

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

Copper Coil Tube,T2 Soft  4mm OD 6mm  Transmission Copper Nickel Tubing Coil Thickness 1mm for Refrigeration(2m)

  • Fine ductility and corrosion resistance and weld ability.
  • Can be made into all kinds of semi-finished products and finished products by cold, warm forging.
  • Excellent electrical conductivity, used in manufacture of wire, cable, brush(electric), etc.
  • Good thermal conductivity, used in manufacture of magnetism instruments or meters that need anti magnetic interference, such as compass, aviation instrument, etc.
  • Wonderful plasticity, easy to machining under hot and cold pressure, can be made into tube, rod, wire, strip, belt, plate, foil, etc.
Check Stock

YESHMA Cylinder Head Stud Kit Compatible with Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400 Head Studs

  • 【Compatibility】:Compatible With the SBC Engine.Compatible With Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400 Head Studs..
  • 【Quality Standard】:Each cylinder head screw set is strictly manufactured to ensure zero defects-hardened and parallel ground washers are included with zero failures to ensure uniform load distribution and accurate torque readings..
  • 【Forging Process】:The Cylinder Head Stud Kit are cold forged to ensure molecular integrity and heat treated before thread rolling and machining..
  • 【Installation Suggestions】:Product installation involves the engine, the internal structure of the engine is complex, Professional Installation is Highly Recommended..
  • 【Packing Include】:One set of Cylinder Head Stud Kit.As Shown in the Pictures.If you have any questions, please feel free to contact us, we will reply you within 24 hours.​​.
Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Brass Oil Distributor 5\\/6 Way Adjustable Lube Oil Piston Distributor Value Manifold Block for Centralized Lubrication System(1 in 5 out)

  • ☛【Oil Volume Outlet Can Be Adjusted】The oil volume of each oil outlet can be adjusted to meet the needs of various working scenarios.
  • ☛【Easy To Adjust And Distribute 】The oil separator has a simple and compact structure, and is easy to adjust and distribute evenly.
  • ☛【Wear Resistance And Durable】Using high‑quality brass material, the oil distributor possesses good wear resistance and is durable.
  • ☛【Good Product Performance】Good production technology and air tightness ensure good product performance.
  • ☛【Applicable Widely】 The product is applicable to CNC machining center machinery, production lines and machine tools, forging machinery, die-casting machinery, woodworking machinery and other mechanical equipment lubrication systems.
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

2M Soft Copper Tube, OD 4mm x ID 3mm Copper Round Tubing Used in Manufacture of Wire, Cable, Brush, Compass, Aviation Instrument

  • ✔ 【Good Thermal Conductivity】 - The copper pipe used in manufacture of magnetism instruments or meters that need anti magnetic interference, such as compass, aviation instrument, etc..
  • ✔ 【Wonderful Plasticity】 - Easy to machining under hot and cold pressure, can be made into tube, rod, wire, strip, belt, plate, foil, etc..
  • ✔ 【Premium Performance】 - Fine ductility and corrosion resistance and weldability. Can be made into all kinds of semi-finished products and finished products by cold, warm forging..
  • ✔ 【Excellent Electrical oCnductivity】 - The copper hose commonly used in manufacture of wire, cable, brush(electric), etc..
  • ✔ 【After-sales Service】 - If you have any questions about our products, please contact us by email with no hesitate and we will do our best to solve your problem..
Check Stock

ER-32 Hex Collet Block Chuck, Workholding Collets Tool Holder for CNC Lathe Engraving Machine, High Strength and Hardness, Sturdy and Durable

  • Through hole allows the machining of long parts..
  • Used for quick setup on CNC machine tools..
  • Made of tool steel material, through hardening treatment..
  • Professional manufacturing, high machining accuracy..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Sandvik Coromant LF123E059-16B Steel CoroCut 1-2 Shank Tool for Parting and Grooving Holder, 0.1\ Maximum Depth of Cut

  • CoroCut 1-2 1.000" Square Shank External Machining - Shank Tools.
  • Square Shank Parting and Grooving Holder CoroCut Tool Holder.
  • Clamp screw: 3212012-259 Key 5680043-14 Coolant Nozzle Additional spare parts.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

Sandvik Coromant RF123G079-16B Steel CoroCut 1-2 Shank Tool for Parting and Grooving Holder, 0.421\ Maximum Depth of Cut

  • CoroCut 1-2 1.000" Square Shank External Machining - Shank Tools.
  • Square Shank Parting and Grooving Holder CoroCut Tool Holder.
  • Clamp screw: 3212012-310 Key 5680043-15 Coolant Nozzle Additional spare parts.
Check Stock

Sandvik Coromant RF123E059-12B Steel CoroCut 1-2 Shank Tool for Parting and Grooving Holder, 0.787\ Maximum Depth of Cut

  • CoroCut 1-2 0.750" Square Shank External Machining - Shank Tools.
  • Square Shank Parting and Grooving Holder CoroCut Tool Holder.
  • Clamp screw: 3212012-259 Key 5680043-14 Coolant Nozzle Additional spare parts.
Check Stock