Klein Tools 80019 Tool Set, Multi-Bit Screwdriver and Nut Driver Tool Kit, 28 Different Industrial Strength Bits and Sizes, 4-Piece
- Multi-Bit Screwdriver Tool Kit is the ideal 4-Piece Multi-Bit Tool Kit for any professional.
- Multi-Bit Screwdriver / Nut Driver, 11-in-1 (Cat. No. 32500) holds 8 popular tips (Phillips, Slotted, Square, Torx Bits) and converts to 3 nut driver sizes.
- Multi-Bit Electronics Screwdriver, 4-in-1, Phillips, Slotted Bits (Cat. No. 32581) has four different non-magnetic tips in one tool, includes #0 and #00 Phillips plus 1/8-Inch (3.2 mm) and 3/32-Inch (2.4 mm) Slotted tips.
- Multi-Bit Screwdriver / Nut Driver, 6-in-1, Stubby, Phillips, Slotted Bits (Cat. No. 32561) has a compact interchangeable shaft that holds 4 universal tips and converts to 2 nut driver sizes.
- INCLUDES: Non-magnetic Nut Driver sizes 1/4-Inch and 5/16-Inch and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) Slotted.
Check StockGeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino
- 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
- Stepper motor with a standard interface could be connected with Driver Board easily.
- A, B, C, D four-phase LED indicates the status of the stepper motor work..
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
- Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check StockKEF LS50 Meta (Pair, Carbon Black)
- LS50 Meta features KEF's breakthrough Metamaterial Absorption Technology (MAT) reducing unwanted sound from the rear of the driver by 99%..
- Features KEF'S 12th Generation Uni-Q Driver proving a 40% increase in smoothness over the previous version..
- Available in four stunning finishes: Cabon Black, Mineral White, Titanium Grey, and Royal Blue Special Edition.
Check StockFits 2003-2007 Cadillac CTS/CTS-V 4Pc Mats EBONY VELOURTEX CADILLAC LOGO
- Four piece mat set for driver, passenger & rear seats.
- Made by Lloyd Mats in their Velourtex material.
- Features professionally embroidered Cadillac logo on driver & passenger mats.
Check StockDayton Audio MKSX4 Four 4\ Driver Low Profile Passive Subwoofer
- Unique four driver design combines form and function.
- Utilizes same high excursion drivers as the MK402 bookshelf speakers providing a matched, cohesive sound.
- Manifold driver layout mitigates unwanted vibration and resonance.
- Removable rubber feet allow the sub to be installed upright or laid flat.
Check StockBose F1 Model 812 Flexible Array Loudspeaker
- Strong, low-frequency output from a 12-inch high-performance woofer.
- F1 Model 812 (45 lbs.) – 26.1″ H x 13.1″ W x 14.6″ D | F1 System Stack (85 lbs.) – 73.5” H x 16.1” W x 17.6” D | Max SPL – @ 1m, 132 dB (peak) | Rated power – 1,000 W | Frequency response (-3 dB) – 52 Hz – 16 kHz | Range (-10 dB) – 43 Hz – 20kHz.
- Bi-amplified design with 2 high-output, Class-D amplifiers to separately power the FLEX array and 12-inch LF driver.
- Exclusive flexible array can be configured into four unique shapes (“Straight,” “C,” “J” or “Reverse J”), allowing the customer to choose the best possible coverage pattern for the application.
- 2 input channels with independent volume controls and Line Level/Mic switch on Channel 1 | Wide, consistent coverage from an 8-driver mid/high line array, with each driver mounted on a custom 100° waveguide.
Check StockBosch GSR12V-300N 12V Max EC Brushless 3/8 In. Drill/Driver (Bare Tool)
- Efficient drill/driver design provides Pro torque in a 3/8 in. Drill/driver At only 1. 6 lbs. (Tool only, not including battery).
- Eco Brushless motor delivers 300 in. -Lbs. Of torque and a max speed of 1, 750 RPM for outstanding performance.
- Compact housing features a head length of only 6. 0 in. And a weight of only 1. 6 lbs. (Tool only, not including battery).
- Two-speed transmission provides a high-power setting at 0-460 RPM and a high-speed setting at 1, 750 RPM.
- Precision 20+1 clutch settings allows for accurate torque settings for less fastener damage.
- Included Components: (1) Gsr12V-300 12V Max Ec Brushless 3/8 In. Drill/Driver.
Check StockSony 5.1-Channel Surround Sound Multimedia Home Theater Speaker Bundle
- Bundle Includes: Sony SSCS8 2-Way 3-Driver Center Channel Speaker (Black), Sony SSCS5 3-Way 3-Driver Bookshelf Speaker System (Black) and Sony 10-Inch Active Subwoofer (Black).
- Mica-Reinforced Drivers: The SS-CS8 utilizes foamed, dual-layer mica woofer diaphragms - the upper surface is fashioned to deliver supple and faithful sound quality, while the bottom layer is designed to leverage low weight with strength for a powerful bass response.
- Optimized Crossover Component: The crossover network in the SS-CS8 is intended to assure minimal signal loss for an energetic vocal response with even the most delicate nuances. It is mounted directly to the cabinet for vibration isolation.
- 145W Peak Power: Equipped with two 4-inch woofers and a 1-inch tweeter, the Sony SS-CS8 2-Way 3-Driver Center Channel Speaker handles 145W of peak power.
- Reduced Vibration: Four rubber foot pads are included to isolate the speakers from your shelf, so as to reduce shelf vibration.
Check StockKlein Tools 80019 Tool Set, Multi-Bit Screwdriver and Nut Driver Tool Kit, 4-Piece & 11055 Wire Cutter and Wire Stripper, Stranded Wire Cutter, Solid Wire Cutter, Cuts Copper Wire
- Product 1: Multi-Bit Screwdriver Tool Kit is the ideal 4-Piece Multi-Bit Tool Kit for any professional.
- Product 1: Multi-Bit Screwdriver / Nut Driver, 11-in-1 (Cat. No. 32500) holds 8 popular tips (Phillips, Slotted, Square, Torx Bits) and converts to 3 nut driver sizes.
- Product 1: Multi-Bit Electronics Screwdriver, 4-in-1, Phillips, Slotted Bits (Cat. No. 32581) has four different non-magnetic tips in one tool, includes #0 and #00 Phillips plus 1/8-Inch (3.2 mm) and 3/32-Inch (2.4 mm) Slotted tips.
- Product 1: Multi-Bit Screwdriver / Nut Driver, 6-in-1, Stubby, Phillips, Slotted Bits (Cat. No. 32561) has a compact interchangeable shaft that holds 4 universal tips and converts to 2 nut driver sizes.
Check StockDGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino
- A, B, C, D four-phase LED indicates the status of the stepper motor work..
- Stepper motor with a standard interface, when used directly pluggable..
- 5 line 4 phase can be used for ordinary..
- ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking..
- Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board.
Check StockLEGO City The Mine (4204) (Age: 6 - 12 years)
- Includes four minifigures: a crew chief, a crane driver, a driller and a truck driver.
- Accessories includes three dynamite packs (one with a timer), two detonators, two rocks containing six gold nuggets each, 36 small rocks in a selection of colors, two gold bars, an explosion warning sign, a storage box, a jackhammer, a fence with hazard lights, a wheelbarrow, a broom, a shovel, a pickaxe, a walkie-talkie and a coffee cup.
- Mine features a train, a train track, a mine door, a safe and a working conveyer belt.
- Crane features a rotating cabin, a moving arm and a lowering shovel.
Check StockSony 3-Way 4-Driver Bass Reflex Stereo Floor-Standing Speaker Bundle with Monoprice Select Series 16 AWG Speaker Wire 100ft and Deco Gear 6 x 6 inch Microfiber Cleaning Cloth
- Sony 3-Way 4-Driver Bass Reflex Stereo Floor-Standing Speaker.
- Experience authentic, full-frequency audio with this versatile three-way coaxial, four-driver speaker system.
- High-Resolution Audio for uncompromising sound.
- BUNDLE INCLUDES: Sony 3-Way 4-Driver Bass Reflex Stereo Floor-Standing Speaker - Monoprice Select Series 16 AWG Speaker Wire 100ft - Deco Gear 6 x 6 inch Microfiber Cleaning Cloth.
Check StockDell 452-BCYT D6000 Universal Dock, Black
- Troubleshoot incompatible display driver this message will appear if the primary graphics card drivers installed are not wddm compatible. Windows 7 onwards is not designed to operate without wddm drivers. Download and install the latest graphics drivers for your primary graphics card.Third 4K display at 30 Hertz.
- Four USB 3.0 Ports. One USB C port. System Requirement (Recommended): PC’s equipped with USB 3.0 or USB C port, Display Link Driver installation.
- Os required Windows 7, 8, 8.1, 10 32/64bit or later. Charges up to 65W laptop via USB C.
- Supports up to three 4K displays or a single 5K Display.
- Enjoy Ultra HD 5K on a single screen or up to three 4K displays via USB C.
Check Stock