Categories

Best Four point Contact Ball Bearing

Crescent 3-1/2 Inch Harpoon Blade Composite Handle Pocket Knife - CPK350C

  • 5Cr15MoV steel blade features premium grade stainless steel and is precision-ground for excellent cutting performance.
  • Smooth action heavy-duty ball bearing system provides quick and easy blade deployment for the life of the tool.
  • Ergonomic handle optimizes hand and finger contact points to maximize fit, control, and user ergonomics.
  • Harpoon blade design provides overall blade durability and extra leverage for a variety of cutting applications.
  • Easy action flipper tab for easy blade deployment.
  • Liner lock mechanism provides secure locking of blade in open position and easy closing action.
  • Composite handle is ergonomically designed to optimize hand and finger contact points for enhanced fit and superior control.
Check Stock

Schaeffer Manufacturing Co. 02192-029 SynForce Green Extreme Pressure Waterproof Grease NLGI #2, 14 oz. (Pack of 30)

  • Excellent extreme pressure and load carrying capabilities (four ball e.P. Weld point > 800 kgs).
  • Superior protection to shock loading that protects and cushions against impact, vibration, stress and chatter during heavy loads and start-stop operations.
  • Excellent resistance to water washout and water spray off.
  • 100% reversibility—grease retains its grease-like consistency and remains with bearing during severe mechanical action..
  • Strong resistance to oxidation and thermal degradation especially during high temperature operation.
Check Stock

Sumner 784310 Lil Hoister 2210 Lift 10 Maximum Height 300 lb Lifting Capacity

  • UNIVERSALLY FITS ALL KAYAKS, CANOES, AND PADDLE BOARDS: Enjoy the freedom to have your watercraft on or off in minutes with this garage ceiling....
  • EASY TO INSTALL: Four point hoist kit comes with illustrated instructions and installation video. Block and tackle are pre-assembled.
  • SIMPLE USE: Patented system lifts evenly regardless of weight distribution. Pulley system reduces weight by 6 times for a 6:1 mechanical advantage..
  • SAFEST HOIST DESIGN WITH ANTI-DROP SYSTEM: The self-locking cleat grips instantly to prevent accidental release if the rope is dropped..
  • QUALITY MANUFACTURING WITH 5-YEAR WARRANTY: High quality stainless steel hardware and double braided rope provide durability, ball bearing pulleys....
Check Stock

Alera ALEPAFFLG Two-Drawer 14-7/8 in. x 19-1/8 in. x 27-3/4 in. Metal Pedestal File Cabinet - Light Gray

  • Four casters (two locking) for mobility or four glides for stationary use..
  • Counterweight anti-tip mechanism prevents tipping..
  • High-sided file drawers include legal conversion bar..
  • Steel ball bearing slide suspension with 3/4 extension on box drawers and full-length extension on file drawers..
  • Two 12" high-sided file drawer with full steel ball bearing slide extension..
  • Visible, easy-access casters, two locking..
Check Stock

Hookah Set 4 Hose - GRENAOH 22

  • GRENAOH Premium Hookah Series - 22" Complete System.
  • Parts: (1) Glass Vase, (1) Shaft w/ Downstem, (4) Synthetic Leather Hose, (1) Ceramic Bowl, (1) Ashtray, (1) Pair of Tongs ,(50) hookah foil,(100) Disposable Hookah Tips - All Rubber Seals Included.
  • Modern Design,Stylish and Easy to Assemble, Disassemble, Clean and Store Away.
  • Four Hoses Can Be Used Simultaneously - 4 Hose Valves Have Internal Ball Bearing Air Plugs - Hose Valve Will Automatically Close When Not in Use.
  • Worry-Free Purchase: If the Product is Defective or Damaged During Transportation, Please Contact Us, We Will Be the First Time to Replace or Refund..
Check Stock

RBC JHA15XL0 Thin Section Ball Bearing, Sealed, 4-Point Contact X-Type, 1.5\ Bore x 1.875\ OD x 0.25\ Width

  • X-type 4-point contact ball bearing for use where space is limited and moment loads are high.
  • Deep-groove geometry for high speeds and supporting both radial and axial loads.
  • 52100 steel races and bearing balls for durability and resistance to deformity under heavy loads.
  • Conforms to ABEC 1F precision standard for performance within a narrow range of variation.
  • Rubber seals to retain lubricant and for protection against contaminants.
Check Stock

TACTICAL GEARZ G10 Pocket Knife! TG Lux Solid G10 Handle Razor Sharp D2 Steel Blade! Ball Bearing Pivot System! Includes Sheath!

  • Premium EDC Pocket Knife, Razor Sharp D2 Steel Drop Point Blade, Solid G10 Handle, Ball Bearing Pivot System!.
  • Features Include: 420 SS Belt Clip & Screws! Ball Bearing Pivot System, Liner Lock. Includes Nylon Storage Sheath!.
  • Handle Construction: 420 SS Screws, Durable Textured G10 over Milled Stainless Steel Inlays. G10 is favored for its high strength, low moisture....
  • Blade: Razor Sharp High Quality D2 Steel, Drop Point, Hardness: 59HRC, Heat Treatment: Vacuum, Blade thickness: 4.1mm (.16").
  • Blade Length: 3.5", Handle Length: 4.5", Overall Length: 8", Weight: 5.01oz. Includes Nylon Storage Sheath.
Check Stock

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

  • Pressed steel flanged housing for light-duty applications with low to moderate speeds.
  • Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
  • Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Extended inner ring for increased shaft support.
Check Stock

Southwire Tools & Equipment KODRAW3/4 Knockout Punch Draw Studs, 3/4-Inch

  • Manual knockout sets with unique 3-point cup cutting surface provides a clean, quick and easy cut, saving time and money.
  • Slug splitting punch features in an economic Manual ball bearing design.
  • Cuts through 10 gauge mild steel as well as aluminum, fiberglass, and plastics.
  • Punches and Dies may be used with southwire mpr01sd ratchet drivers and mp-01pro or m360hp Hydraulic drivers.
  • Ball bearing 7/16-inch and 3/4-inch draw studs for reduced friction.
Check Stock

10pcs 6700ZZ Thin Section Bearing Thin Wall Mini Ball Bearings Double Shielded 10x15X4mm

  • This A-Type, angular contact ball bearing is best suited to applications with high axial loads. This bearing also works well in radial or combined radial-thrust applications but should never be used alone to support moment loads or reversing axial loading..
  • Thoroughly coated in MIL-PRF-3150 or MIL-PRF-6085 oil and drained of excess and vacuum sealed in a plastic bag for shipping..
  • Manufactured to ABEC 1F precision tolerances related to the bearing bore, outer diameter, radial runout, axial runout and radial play..
  • Static Thrust Rating 970 pounds, Dynamic Thrust Rating 960 pounds.
  • This RBC thin section ball bearing can be advantageous in a design where space limitations, combined loading, or weight restrictions are proving to be challenging to overcome with a traditional ball bearing solution..
Check Stock

OLE ANDIGO Tennis Ball Retrievers, 75 Balls with Wheel

  • Design revolves around a "floating" center rod that moves as you pick up balls, eliminating bent wires.
  • Includes a stand option that allows you to swing the handles down, raising the basket to waist level for ball access, and swing the handles up, lowering the basket for ball pick up. Unbreakable basket bottom is constructed without welds.
  • Basket assembled at the factory prior to shipment - for added protection along the entire contact points (not just at corners like other ballhoppers).
  • Comes shipped in four pieces A)The Basket B) The two Handles C) the cover!.
  • #1 top of the line tennis hopper and truly built like one should be! GUARANTEED DURABILITY! Will outlive any other hopper.
Check Stock

3007715/98001.175x25 Spline Gray

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

SRC16 Sealmaster New Ball Bearing Cartridge Unit

  • Cartridge block with ball bearing insert for use with cylindrical bore housings.
  • Steel cartridge housing and single-row radial ball bearing for applications that support high radial loads.
  • Relubricatable solid one-piece cartridge housing for maximum strength and rigidity.
  • Fixed-type bearing with two set screws set apart at 120 degrees for secure attachment to a cylindrical shaft.
  • Felt labyrinth seal for protection against contaminants, and for less drag and heat generation than heavy contact seals.
Check Stock