Categories

Best Fpc 4 Layers Board

FR4 Epoxy-Sheet Resin Glass-Fiber Insulation-Plate - 335X300X1MM Green

  • 1. FR-4 epoxy board has the characteristics of insulation, flame retardant, high temperature resistance, and strong physical properties.
  • 2. It is an indispensable main material or auxiliary material for high -end motor electrical appliances, wind power, hydropower, rail transit, aviation navigation, mold molds, electronics, intelligent physiotherapy and other industries..
  • 3. You can injection mold molding machine, motor, PCB, ICT treatment table grinding pad, high -performance electronic insulation, FPC reinforcement board, carbon film, insulation pad ..
  • 5.Size: 1/25 "Thick x 11.8" Wide x 13.2 "Long.
Check Stock

Geekworm Raspberry Pi Hdmi in Module, Hdmi to CSI-2 C790, Hdmi Input TC358743 Supports up to 1080p60fps Video & Audio Supported Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W/CM4

  • 【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
  • 【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
  • HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
  • 【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable（15cm length） ✔1 x FPC 22pin 0.5mm cable（15cm length） ✔1 x I2S cable (15cm length).
  • 【User manual】Refer to our WiKi search C790..
Check Stock

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

SKYRC eFUEL 1200W/50A Regulated Power Supply High Power High Output

  • Over Temperature Protection Over Current Protection hort Circuit Protection Gives you Max Safety.
  • PFC, short for power factor correction, consists of active FPC and negative FPC. Active FPC, which is integrated into SkyRC 1200W/50A regulated power supply, can provide higher power utilization..
  • Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. It’s capable of correction on AC input voltage and universal on a global basis..
  • Adopting the intelligent Air cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree..
  • Maximum output of the main port is 50A, while each of other three deputy outlets provides up to 10A output with a switch to control respectively. 1200W output with 4 outlets to power your charger, you deserve to have one such power supply..
Check Stock

TKDMR 300W PTC Heating-Soldering Plate - Hot Plate LED Remover Chip Welding Station for LED Repair DIY Laboratory

  • Material: Aluminum+PTC, Size: (L)X(W) 120x70mm / 4.72''x2.76''(appr.).
  • Input Voltage: 110/220V, Power: 300W, Max temperature:500℉.
  • Automatic constant temperature. High performance and high power.Use for LED remove and repair and Laboratory heating..
  • Can also be used for BGA solder ball.Can be used to disassemble the LED light bead and FPC board.PTC heating plate and heat dissipating aluminum sheet construction..
  • 30 seconds will be reach about 500℉ (±10%) ≈260℃.The temperature is constant. It has no temperature regulator..
Check Stock

eXtremeRate Clicky Hair Trigger Kit for Xbox One X/S Controller LT RT Shoulder Buttons, Custom Flashshot Trigger Stop Flex Cable for Xbox One X/S Controller Model 1708

  • Only compatible with Xbox One X/S controller (model 1708).
  • Custom Clicky flex cable with built-in bracket is specially designed for Xbox One X/S controller, which can shorten the LT RT trigger distance to 1.5mm and make its speed up shooting.
  • The installation process requires customer with basic electronic upgrade experience. Clicky FPC boards need to be soldered. Get an installation video guide on YouTube by searching “eXtremeRate Xbox One X/S Clicky Trigger Kit".
  • Package includes customized conductive flex cable, FPC board built-in bracket kit, 2 screwdrivers and spare screws. Note: The controller, trigger button and other parts are not included.
  • Kindly note after installing the Xbox One X/S Clicky hair trigger kit in racing games is always full speed. If you have any problems with this product, please feel free to send us a message.
Check Stock

eXtremeRate Clicky Hair Trigger Kit for Xbox Series X/S Controller LT RT Shoulder Buttons, Custom Flashshot Trigger Stop Flex Cable for Xbox Series X/S, Xbox Core Controller Model 1914

  • Only compatible with Xbox Series X/S, Xbox Core controller (model 1914).
  • Custom Clicky flex cable with built-in bracket is specially designed for Xbox Series X/S controller, which can shorten the LT RT trigger distance to 1.5mm and make its speed up shooting.
  • The installation process requires customer with basic electronic upgrade experience. Clicky FPC boards need to be soldered. Get an installation video guide on YouTube by searching “eXtremeRate Xbox Series X/S Clicky Trigger Kit”.
  • Package includes customized conductive flex cable, FPC board built-in bracket kit, 2 screwdrivers and spare screws. Note: The controller, trigger button and other parts are not included.
  • Kindly note after installing the Xbox Series X/S Clicky hair trigger kit in racing games is always full speed. If you have any problems with this product, please feel free to send us a message.
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip for Bedroom TV Back Lighting Christmas Valentine s Day Black PCB

  • 【Black FPC LED Strip Light】The FPC is black, which is different from most of white FPC strips. Perfect black FPC strip for you to decorate TV,....
  • 【RGB Color Changing Rope Lights】The led chip is SMD 5050, and each LED contains R, G, B, three independent lamp beads. You can use one RGB remote....
  • 【IP65 Waterproof Tape】This 16.4ft length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Low Power Consumption Strip】This rope light works with 12V power adapter, low Power Consumption & environmental. Safe to touch. (DC 12V Power is....
  • 【Best After-Sales Service】Please contact with us if our 5050 LED strip light can not work or has other problem. Professional SUPERNIGHT team would....
Check Stock

digitharbor® Video Door Scope Viewer Build-in 600mAh Lithium Battery+cyclic Storage Digital Peephole viewer Door Camera Door Open Chime 2.4 inches Color 320x420p LCD Screen 0.3MP 90degrees View

  • please be advised, you have to drill a hole on your front door before installation.it is not wireless, and do not support external memory card..
  • Step 1: According to the door thickness to choose a suitable screw, then turn the screw into the screw hole on the barrel of outdoor unit..
  • Step 2: Insert the barrel together with the FPC through the door peephole, then hold the outdoor part on door in right direction..
  • Step 3: Take out the metal bracket (the "UP" arrow on the bracket means upward), the FPC pass through the rectangular hole, the screw pass through the round hole of the metal bracket, then to lock the metal bracket with outdoor part tightly..
  • Step 4: Connect the FPC from outdoor unit to the connector of the indoor unit in right direction.Step 5: The four slots on the back of indoor unit is aligned with four hooks on the metal bracket and buckle up, then pull down indoor unit to lock tightly. Done!.
Check Stock

KREPLACEMENT® 10.1 Inch Touch Screen Digitizer Sensor Glass Panel Replacement for ASUS Transformer Book T100TA-C1-GR (Non-LCD)

  • No.1, ONLY 10.1" Touch Screen digitizer panel for ASUS Transformer Book T100TA-C1-GR. FPC Version: Black. Please make sure that your touch digitizer FPC is in Black Color..
  • No.2, 7-15 working days to U.S.A. Our carrier is safer for FRIABLE product..
  • No.3, Sometimes, touch digitizer is called "Touch Screen". BUT the internal LCD screen is not included HERE..
  • No.4, Assume that you are skilled in installation. It's a replacement part, if you're unsure about the compatibility, please contact us in advance..
Check Stock

Arducam 16MP Autofocus Raspberry Pi Camera Module with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models

  • 【16MP for All Pis】The Raspberry Pi camera features a 16MP IMX519 sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera.
  • Compatible with any Raspberry Pi board with a MIPI/CSI interface.
  • Unlike the native Pi camera, this camera requires some simple script configuration before use, and does not support raspbian..
  • 【IMX519 AF Camera Moudle】Built-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera. The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds..
  • 【Crisper Images/Videos】The 16 megapixel camera can capture 1080p Full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view..
  • 【V1/V2 Size】The autofocus camera module has the same size as the pi camera V2, the package comes with plastic housing, also suitable for V1 and V2 boards. And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod..
  • 【Package Contents】The package includes a camera board with IMX519 sensor and an autofocus lens, an FPC cable and a camera housing. Please search ....
Check Stock

MakerFocus Raspberry Pi Expansion Board 4 Channel Relay Board Module Power Relay Module for Raspberry Pi 4B/3 Model B+/Raspberry Pi 3/2 Model B (No Programming Required/Programmable)

  • The product operation guide can be obtained in the product guide and document. This Raspberry Pi expansion board supports Raspberry P.
  • The Relay Board gives your Raspberry Pi board the ability to control high voltage/high current devices, and easily makes normal home appliances become intelligent. Can be accessed programmatically or directly by shell. Up to 4 layers can be stacked..
  • Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication..
  • The 4 Channel Relay uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi. You can use mulitiple relay modules stacked together to add many channels.
  • The 4 Channel module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects.
Check Stock

A Drop in the Bucket

  • Only compatible with PS4 Gen 2 controller (CUH ZCT2*, JDM-040/050/055).
  • Check the second picture of the listing before purchase.
  • Custom Clicky flex cable with built-in buttons is specially designed for PS4 controller, which can shorten the trigger distance to 1.5mm and make its speed up shooting.
  • Easy for installation, just to take apart your controller, replace and install.
  • Get an installation video guide on YouTube by searching "eXtremeRate Clicky Trigger Kit for PS4".
  • Package includes customized conductive flex cable, FPC board built-in buttons kit, cross screwdrivers and spare screws. Note: The controller, trigger button and other parts are not included.
  • Kindly note after installing the Clicky hair trigger kit in racing games is always full speed. If you have any problems with this product, please feel free to send us a message.
Check Stock