Categories

Best Fr Block Transmitter

Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

  • FLEXIBLE USE---Without assembled, the prototype screw terminal block shield board allows you to try variety mount methods, so that you can use it flexibly.
  • COMPACT STRUCTURE---With compact structure, the prototype screw terminal block shield board is made up of screw terminal block, high quality PCB carrier, FR-4 glass fiber PCB.
  • RICH COMPONENTS---The prototype screw terminal block shield board includes prototype PCB, terminal blocks, and female header sockets, satisfying your working needs.
  • LONG SERVICE PERIOD---Made of high quality of material, and with delicate workmanship treatment, the prototype screw terminal block shield board has long serving life, practical and economic.
  • EXCELLENT AFTER SALE SERVICE---Except the premium product we provide, we also provide considerate after sale service. Please contact us for any problem about our product. It is our pleasure to service you.
Check Stock

AKK KC04 5.8G 600mW FPV Transmitter 700TVL 2.8mm 120 Degree FPV Camera for Racing Quadcopter

  • Small size and light weight, Signal System: NTSC.
  • VTX has 5V output for camera, no need extra battery for cam..
  • The transmitter has double push buttons for easy changing CH and FR.
  • A RTF FPV System for beginners, Suitable for all quadcopters and drones..
Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Happymodel Mobula6 Quadcopter Indoor Four-axis 1S 65mm Brushless Bwhoop Drone BNF AIO 4IN1 Crazybee F4 Lite Flight Controll Built-in 5.8G VTX Parts Without Remote Controller (25000KV Frsky RX)

  • Flight controller: (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Onboard 4in1 ESC: MCU upgraded to EFM8BB21.
  • Current: 5A continuous peak 6A (3 seconds).
  • OnboardFrsky SPI D8 receiver Version: SPI BUS receiver Frsky D8 compatible.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m.
  • OnboardFlysky SPIreceiver Version: SPI BUS receiver.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m.
Check Stock

1769-OA16 Compact I/O 16 Point Output Module 1769OA16 1 Year Warranty

  • Pitch 3.81mm/0.15" screw terminal block..
  • Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
  • FR-4 fiber glass PCB, dual copper layers..
  • Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..
Check Stock

HAPPYMODEL Mobula6 1S 65mm Brushless Whoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTX RC Toy Gift (25000KV Frsky)

  • Flight Controller: (Frsky SPI RX Version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX Version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Receiver Option: Internal SPI Frsky Version (Compatible with ACCST D8/D16, Recommend Non EU transmitter D8 mode).
  • Internal SPI Flysky version(Compatible with AFHDS 8CH and AFHDS-2A 14CH Flysky transmitter).
  • Motor Speed Option: SE0802 KV25000(Race Edition).
  • Onboard 4in1 ESC : Support BLHeliSuite Programmable.
  • AIO 4IN1 Crazybee F4 Lite Flight Controller built-in 5.8G VTX.
  • Extreme Light 1S 65mm Brushless Whoop only 20g.
  • Runcam Nano3 The Lightest 1/3 CMOS 800TVL Camera.
Check Stock

Kat's Frost Plug Engine Heater - 1-3/4\ NPT (44.5 MM) 600 Watt w/ 120 Volt Farmer Bob's Parts K7FR

  • Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Most efficient and reliable way to pre-heat engine block..
  • 10609, 815705, GE24, K7FR, K962705, 11609.
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.

  • Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3..
  • FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm..
  • Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )..
Check Stock

Crank 2.0 (Radio Edit)

  • .../60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global 5V AC / DC Adapter Compatible with ETON FR-300 FR300 FR-250 FR-350 FR-400 FR-405 American Red Cross ARC Emergency Radio AM/FM/SW 1-7 FR200 FR200G Emergency Crank Radio ARCFR300W DC4.5V - DC5V 100mA 200mA 4.5VDC - 5VDC 0.1A 0.2A - 1A 4.5V - 5.0V 4.5 V - 5 V 4.5 VDC - 5 VDC Switching Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU (✅ with a middle negative pin. with ✅ DO: 3.5mm small barrel tip. ❌NOT OD: 5.5mm big barrel tip.).
  • Compatible with: Eton FR300 FR-300 Multi Purpose Radio Re-Inventing Radio LL Bean AM/FM/TV1/TV2/Weather Receiver.
  • ETON Adapter Part Number GPU3504 4.5 volts with the center pin negative with a maximum current of 100 milliamps (0.1 amps).
  • ETON Model: SY-05014 SY05014 4.5VDC 100mA Class 2 Power Supply.
  • Compatible with: Eton Grundig ETON FR200 FR200G FR-200 G FR-200G FR-250 FR-300 FR-350 FR-400 American Red Cross EMERGENCY RADIO Traveler II Digital G8 Radio G8-ACA-US.
  • ETON FR250 FR300 FR350 FR400 FR405 American Red Cross EMERGENCY RA....
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

CZH-LABS DSUB DB62HD Male/Female Header Breakout Board D-SUB Breakout Moudle.

  • Standard DB62HD Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
Check Stock

Hubbell TD1000 Digital Display Module

  • Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
  • Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
  • Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
  • High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check Stock