Categories

Best Fr4 0 8mm

G10 FR4 300 * 335 * 3.0mm Fiberglass Composite Sheet Panel 3.0MM 11.8 x 13 Inch for DIY Models Part and Knife Handle

  • Thickness Tolerance: (-0.005" - +0.005").
Check Stock

DingPeng 5.8GHZ Triple Feed Patch Antenna SMA/RP SMA Directional Circular Polarized Antenna for FPV Fatshark Goggles RC Drone RC Drone FPV Antenna Color RP SMA

  • The Triple Feed Patch antenna is a directional circularly polarized antenna..
  • Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz..
  • Good axial ratio, not just directly perpendicular to the patch but also off-center..
  • Cheap and easy to manufacture with high accuracy, even for a hobbyist..
Check Stock

KEYESTUDIO 10PCS Proto Shield for Arduino Mega, Double Sided PCB Prototype Shield Solderable for Arduino Mega R3 2560

  • Good Value PCB Diy Kit-contains 10 pieces prototype circuit boards and comes with a beautiful box.
  • Perfect size for arduino mega board-seamlessly plug it into the mega board with the pin headers and 4 mounting holes at the corners.
  • High Quality-solid and sturdy glass fiber FR4 material proto boards, thick and double sided.
  • Very Convenient-clear yellow pin labels and pre-tinned plated holes on board make you easily solder components and sensors for your projects without mistakes.
  • Hole-pitch: 2.54mm/ 0.1inch, Hole-diameter: 1mm/ 0.04 inch, allowing easy attachment of medium sized wire.
Check Stock

RCmall 5.8GHz Triple Feed Patch Antenna High Gain 9.4dBi Directional Circularly Polarized LHCP RHCP Antenna with 50ohm SMA Load Terminator for FPV Racing Drone Eachine EC800D

  • The Triple Feed Patch antenna is a directional circularly polarized antenna..
  • Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz..
  • Good axial ratio, not just directly perpendicular to the patch but also off-center..
Check Stock

Foxeer Pagoda PRO 5.8G FPV Antenna SMA Pagoda Antenna RHCP 150mm Omnidirectional Antenna for Long Range FPV Racing Drone Quadcopeter TX/RX Black

  • Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz.    Additionally, most array....
  • Exceptionally good axial ratio, not just directly perpendicular to the patch but also off-center..
  • High gain, though not as high as the theoretical gain of an array with 7 ?lements.    This is because maximizing the gain would result in high....
  • Very low sidelobes, almost all energy is concentrated in the main lobe.    This increases the width of the main lobe, at the expense of some gain..
Check Stock

MG Chemicals 6\ x 4\ Positive Presensitized Copper Clad Board, Single Sided, 1 oz Copper, 1/16\ Thick, FR4, cat# 606

  • This flame retardant laminate is translucent in color and made of continuous woven glass cloth impregnated with epoxy resin.
  • The copper on 1 ounce boards is 1.34mil thick (0.0341mm, 34.1 microns).
  • The boards are made of FR4 which is a flame retardant version of G-10 material.
  • Developed specifically for the circuit processing industries requirements.
  • Complies with UL #E214381 (select boards comply to UL #E213990).
Check Stock

NC KDAFA Pagoda Array FPV Antenna,150mm Triple Feed Patch 5.8GHz 14dBi Pagoda Array FPV Antenna for RC Drone Eachine Skyzone Fatshark Goggles Monitor Ground Station

  • Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz.    Additionally, most array....
  • Exceptionally good axial ratio, not just directly perpendicular to the patch but also off-center..
  • High gain, though not as high as the theoretical gain of an array with 7 ?lements.    This is because maximizing the gain would result in high....
  • Very low sidelobes, almost all energy is concentrated in the main lobe.    This increases the width of the main lobe, at the expense of some gain..
Check Stock

5.8GHz FPV Triple Feed Patch Antenna, RCmall 9.4dBi High Accuracy SMA Male to SMA Male Cable Adapter, Directional Circularly Polarized Antenna for FPV Racing Drone

  • The FPV Triple Feed Patch antenna is a directional circularly polarized antenna. Connector type is SMA Male to SMA Male. Note: This antenna is not include terminator!.
  • Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz..
  • Good axial ratio, not just directly perpendicular to the patch but also off-center..
  • Cheap and easy to manufacture with high accuracy, even for a hobbyist. With Adapter Link: FS-GR3E.
  • Package included: 1 x Triple Feed Patch Antenna, 1 x semi-rigid coax (SMA male to SMA male). If there is any problem please contact us feel free..
Check Stock

YUNGUI PCB Protoboard,3 Pack PCB Prototype Board Solderable Breadboard for DIY Electronics and Soldering kit(4” X 6”,Blue)

  • ♔The material is all FR4 full glass fiber plate, all Copper foils are Tin-plating for strength,which can effectively prevent the pad from falling off..
  • ♔The solderable breadboard contains 2 size hole diameter of 1mm/0.04”and 1.4mm/0.055”. PCB protoboard holes are Suitable for resistor,capacitor,AWG(American Wire Gauge),SWG (Stand Wire Gauge),and other Electronic Components..
  • ♔PCB board is more suitable for analog circuits and discrete circuits,four mounting holes at the corners of the board are very convenient for installing them together..
  • ♔Electronic parts and Electronic equipment replaced and Repaired include: LCD Modules, Optoelectronic Displays, Capacitors , Resistors , Potentiometers , LED Displays , Electronic Accessories & Supplies,Electronics Stocks,Ative Compent , Integrated circuit , Diode , Transistor..
  • ♔Our Guarantee:Quality assurance,efficient service.Fast Shipping! We provide 30 day money-back and 12-months warranty. Please feel free to contact us if you have any question..
Check Stock

HFS (R) 200Pcs M2 M2.5 M3 M4 Slotted Spring Pin Assortment Kit, 304 Stainless Steel

  • [MATERIAL]: The product is made of 304 stainless steel, corrosion-resistant, durable, rust proof, high tensile strength..
  • [SIZE]: 15PCS M2*6mm(0.236''),15PCS M2*8mm(0.315''),15PCS M2*10mm(0.394''),15PCS M2*12mm(0.472''),15PCS M2.5*6mm(0.236''),15PCS M2.5*8mm(0.315''),15PCS M2.5*10mm(0.394''),15PCS M2.5*12mm(0.472''),10PCS M3*6mm(0.236''),10PCS M3*8mm(0.315''),10PCS M3*10mm(0.394''),10PCS M3*12mm(0.472''),10PCS M4*8mm(0.315''),10PCS M4*10mm(0.394''),10PCS M4*12mm(0.472''),10PCS M4*16mm(0.63'').
  • [EXQUISITE PACKAGING]: The product is equipped with a translucent storage box. The inside of the storage box is evenly divided into multiple storage tanks, which are used to store products of different sizes for easy identification and use.
  • [HIGH PERFORMANCE]: The product is axially slotted and chamfered at both ends to strengthen the positioning, connection and fixation of parts.
  • [WIDE APPLICATION]: It is suitable for various working environment, widely used in automobile, machinery, garage, workshop and power equipment, which can save you a lot of time and money..
Check Stock

BokWin 8mm to 8mm Inner Dia Universal Steering Shaft U Joint Coupler 2Pcs

  • 【Material & Package 】: Nickel-coated iron.
  • 2Pcs 8mm to 8mm universal joint shaft coupling, 4Pcs fastening screws..
  • 【Function】: Can be used in model airplane boat, robot, RC modelmotor etc..
  • 【Widely Used】Universal joint shaft coupling is produced based on International Flange Standard, widely used in model shaft connection.
  • 【Dimensions】: Bore Diameter: 8mm to 8mm (0.31inch to 0.31inch). Thread Size: M4.
  • 【QUALITY AFTER-SALE SERVICE】: If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. FREE REPLACEMENT or REFUND within 90days..
Check Stock

DC 12V Drive Stepper Motor Linear Screw Slider Stepper Motor for DIY Engraving Machine, 18 Degree Lead Screw Worm Drive Stepper Motor

  • ✔ Product Contain: 1 Set T8 Lead Screw Nut Set.
  • ✔ T8 screw thread: clear and complete thread, uniform force, smooth sliding.
  • ✔ Connector size: 25 x19mm / 1" x0.7" Housing bore: 8mm / 0.31".
  • ✔ Lead screw length: 200mm / 7.9" Lead screw diameter: 8mm / 0.31" Link shaft use: 5mm / 0.2" to 8mm / 0.31".
  • ✔ Product Material: 304 stainless steel, high tensile strength, higher hardness than ordinary materials on the market, with moisture, corrosion, acid and rust..
Check Stock

Thrive Causemetics Liquid Lash Extensions Brynn Rich Black-0.38OZ/10.7g

  • Style:12/13/14/15/16mm and Under Eyelashes,Contains length 10D individual cluster eyelashes,12/13/14/15/16mm,20D individual cluster eyelashes,12/13/14/15/16mm, and Under Eyelashes Mixed..
  • 10D individual cluster eyelashes ,thickness 0.10mm , C Curl ，6mm(under eyelashes),8mm,9mm,10mm,11mm,12mm ,13mm,14mm,15mm,16mm./20D individual cluster eyelashes ,thickness 0.07mm , C Curl,Length :8mm,9mm,10mm,11mm,12mm ,13mm,14mm,15mm,16mm,17mm,18mm,19mm,20mm.
  • 10D individual cluster eyelashes ,thickness 0.10mm.
  • 20D individual cluster eyelashes ,thickness 0.07mm , C Curl,Length :8mm,9mm,10mm,11mm,12mm ,13mm,14mm,15mm,16mm,17mm,18mm,19mm,20mm.
Check Stock