Transformateur

Check Stock

Donner Special-Ⅰ Professional High-Performance Passive DI-Box Unit Hum Eliminator 1/4\ instrument Direct Box to balanced & unbalanced XLR

  • 【Heavy-duty】Professional and multi-purpose direct injection box for stage and studio applications.
  • 【High sound quality】Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers.
  • 【Clean and pure 】Ultra-flat frequency response due to renowned Donner LAB-S1 transformer .The transformer also helps eliminate hum and buzz caused by ground loops by isolating the input from the output..
  • 【Robust circuit design】Converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
  • 【Low noise】Ground Lift switch eliminates typical ground loop problems .Send the thru signal to your amp and the output to the PA system. Transformer isolation eliminates nasty hum and buzz caused by ground loops..
Check Stock

Genie GIRUD-1T Alleviates Frequency Interference in Garage Door Opener Remotes Upgrades Most Major Brands to Intellicode Security, Black

  • UPGRADES OLD GARAGE DOOR OPENERS: Upgrades or adds Intellicode security to older openers..
  • ALLEVIATES FREQUENCY INTERFERENCE: The Genie GIRUD-1T is designed to alleviate frequency interference issues from implemented Land Mobile Radio Communication systems that cause shortened opener range..
  • COMPATIBLE WITH MOST MAJOR BRANDS: Don’t have a Genie garage door opener? No problem. The GIRUD is universal..
  • INCLUDES NEEDED ACCESSORIES: Kit comes with receiver box, transformer, wireless remote transmitter, wire and clips, mounting screws and instructions..
  • AUTOMATICALLY SEEKS CORRECT FREQUENCY: The Universal Dual Frequency Kit auto seeks the 315 or 390 Mhz so your opener responds regardless of nearby interference..
Check Stock

Schlage Electronics PS902-2RS Class 2 Power Supply with 2 Relay Output Board

  • Ultra High Output Power:All-copper high-frequency transformer, large output power, can meet one access control controller, 2 electric plug locks or 2 280 kg magnetic locks work at the same time..
  • Quality Material:This access control has an aluminum alloy casing that is rugged, shielded and resistant to interference. The rear of the power supply has a lifting hole that can be placed on the antenna board or hung on the wall..
  • Good Heat Dissipation:This access control power supply has cooling holes, and the side is also equipped with cooling holes, which hae excellent heat dissipation performance, but also fireproof, long serice life and low price. You will not regret it when you buy it back!.
  • high leel, low leel, switching quantity control three ways. Circuit protection: oercurrent, oeroltage, short circuit protection.
  • Buy With Total Confidence:We proide 1 month free return and exchange serice. If you find any quality problems during this period, except for man-made damage, you can contact us and we will gie you one within 24 hours.....
Check Stock

Kuuleyn Vacuum Electron Tube Valve Preamp Amplifier Board Headphone Amp Parts Musical Fidelity Kit, 6J1 Audio Tube Headphone Amplifier, Compact Electronic DIY Kit DIY Parts (Static Bag)

  • 【Funtion】Connect the 6J1 tube pre-amp between sound source and amplifier, it will effectively filter digital flavor, the music and human voice will be relatively good.
  • 【Eight 470uf Capacitor Filter】Eight 470UF capacitor filter is very clean, excellent power system to no hum, filaments are powered with DC 12V and need to be connected in series in order to reduce noise.
  • 【High Frequency And Low Proof】A coupling capacitor is an electrodeless electrolytic capacitor with high frequency and low proof.
  • 【Easy To Use】Using DC 5.5*2.1 socket and AC 12V transformer, you can also use AC 12V transformer without a plug, just need to weld the power cord onto the circuit board.
  • 【Can Yourself Assemble Them】This kit comes in parts so you can assemble them together by yourself, enjoy the process of building your own tube amplifier.
Check Stock

Ceiling and Wall Mount Speaker - 8” 2-Way 70V Audio Stereo Sound Subwoofer Sound with Dome Tweeter 600 Watts in-Wall & in-Ceiling Flush Mount for Home Surround System - Pyle PDIC8LT White

  • 70V TRANSFORMER: Pyle ceiling speakers feature 70 volt transformer, while an 8 ohm bypass setting allows use with regular home audio receivers and....
  • 55Hz - 20kHz FREQUENCY RESPONSE: Pyle 8” speaker system has a directable 1/2” high compliance dome tweeter and 55Hz to 20kHz frequency response.....
  • 2-WAY MOUNT SPEAKER: The stereo sound subwoofer speaker has two way of installation: in-wall or in-ceiling flush mount. It has convenient speaker....
  • FLUSH MOUNT DESIGN: It has a flush mount design midbass speaker in white for simple and easy in-wall or in-ceiling installation. The product includes....
  • 600 WATTS PEAK: The wall speaker system is carefully combined to reproduce sound clearly with outstanding responsiveness and 600 watts. It can achieve....
Check Stock

Indoor Outdoor PA Horn Speaker - 9.7 Inch 20-Watt Power Compact Loud Sound Megaphone w/ 400Hz-5KHz Frequency, 8 Ohm, 70V Transformer, Mounting For 70V Audio System - PyleHome PHSP101T (Gray) Grey

  • ...o horn speaker has 8-ohm impedance, 102dB SPL, & 400Hz - 5KHz frequency range for full-range sound reproduction.
  • FOR 70V AUDIO SYSTEM: Pyle horn pa speaker horn indoor/outdoor megaphone is great for your 70 V audio system. Perfect for outdoor PA systems when you need your voice heard far and wide. Includes a 70 Volt transformer tappable at 20, 15, & 5 watts.
  • EASY INSTALLATION: The mountable public address power horn speaker outdoor pa speaker comes with mounting bracket and hardware to make installation easier. The power horn only weighs 5.97 lbs and measures 9.7" H x 9.7" W x 11.3" D in total.
  • ALUMINUM HOUSING: This compact horn loud speaker music horn speaker sports an aluminum housing structure. The heavy-duty housing and structure provides a strong foundation and it is super easy to mount and install to your existing sound system.
  • Power/Load Rating: 20 Watts RMS - Mounting Bracket & Hardware Included.
  • Nominal Impedance: 8 Ohms - Dimensions: 9.7'' H x 9.7'' W x 11.3'' D.
  • 70 Volt Transformer Tapping @ 20 / 10 / 5 - Color: Grey.
Check Stock

Atlas Sound SM42T-B 4' 2-Way Weather Resistant Speaker System With 70.7V/100V-16W Transformer

  • 1 ferrofluid cooled dome tweeter highly efficient 4 polypropylene woofer..
  • Atlas Sound Polyguard high frequency protection circuit..
  • Weather-resistant construction for year-round indoor or outdoor use..
  • Trx waveguide constant directivity style high frequency wave guide system..
  • Screwdriver Adjustable 16-Watt 70. 7V100V Transformer may be bypassed for 8-ohm operation. Sold in Pairs.
  • included_components : Speakers - Commercial.
Check Stock

Portable No Tune End Fed Half Wave Antenna Assembly

  • The single-band 80m-10m end-feed half-wave linear antenna provides the antenna. It is designed as a highly portable wired antenna that can be easily set as an inverted V-shaped, horizontal, tilted, or vertical radiator (at higher frequencies)..
  • Your feeder is inherently balanced, so no separate feeder is required. The high-impedance half-wave line is matched to your 50-ohm feed point through an integrated impedance-matching toroidal transformer with a rated power of 10 watts..
  • Use a high-voltage capacitor on the primary of the transformer with a specific radiator length to further expand and reduce the SWR within the range of 80m-10m..
  • It is designed to be used without the use of a tuner, and after optimizing the driven element, SWR ≤ 1.2 for any part of the frequency band..
  • Package Included: 1 x Portable No Tune End Fed Half Wave Antenna.
Check Stock

Cermant 5pcs 100W 2 Ohm luminum Case Wirewound Resistors Mounted Resistor Adapters (5pcs 100W 2 Ohm)

  • Aluminum Housed Resistor--aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment..
  • Mounting type: chassis mounted with Screws. Color: yellow..
  • Product Size: 85x20x15mm/3.35"x0.79"x0.59".
  • Adapted To:Nest Hello Doorbell, and transformer, power supply, car LED light, transducer, audio, frequency converter, frequency divider, elevator, arena audio and Other High Requirement Equipment Industry..
Check Stock

Cermant 5pcs 100W 3 Ohm luminum Case Wirewound Resistors Mounted Resistor Adapters (5pcs 100W 3 Ohm)

  • Aluminum Housed Resistor--aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment..
  • Mounting type: chassis mounted with Screws. Color: yellow..
  • Product Size: 73 x 20 x 15mm/2.87 x 0.79 x 0.59inch.
  • Adapted To:Nest Hello Doorbell, and transformer, power supply, car LED light, transducer, audio, frequency converter, frequency divider, elevator, arena audio and Other High Requirement Equipment Industry..
Check Stock

Make 1 Million Dollars

  • SUPERIOR SOUND. High-current EI transformer makes sure that sound quality doesn't suffer. Large custom audio capacitors and a discrete output stage..
  • AMP TECHNOLOGY. Wide Range Amplification Technology delivers high-current power stability via large custom capacitors, while low-NFB amps capture depth and spatiality for a wide frequency spectrum with low distortion..
  • AUTHENTIC AUDIO. Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-pathlengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound..
  • BASS BOOST. Phase Matching Bass Boost eliminates phase-shift between low- and mid-range frequency bands. Bass response is enhanced without compromising vocal clarity, which is especially useful when playing music at low volumes..
  • FEATURES. 50 W + 50 W (4 ohms, 20 hz–20 kHz, 0.9% THD, 2-ch Driven, FTC). Remote controller..
Check Stock

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock