Categories

Best Front Axle Shafts

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Team Associated 20157 SC28 Fox Factory Edition Micro Short Course Truck Ready to Run Kit 1/28 Scale 2WD

  • Off road style front bumper with 2-piece LED.
  • Metal front CVA and rear solid axle shafts with 12mm hex adapters.
  • Black anodized aluminum battery/radio tray with hook-and-loop hold down strap.
  • Black scale 1.9 wheels with soft compound off road tires.
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Steel Axle Front CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10

  • Come assembled for easy installation, Ultra high strength cross pins.
  • Increased size universal joint for maximum strength at the joint.
  • Some rubbing may occur initially at the link mount screws due to larger diameter shafts..
Check Stock

ZKTOOL Lower Control Arm Prying Tool,2 Pack Specialty Tools for Mechanics Lower Control Arm Tool,Suspension Specialty Bushing Tool, Designed to Work With a 7/8 in Diameter Pry Bar.

  • 【8629 Wheel Hub Removal Tool】Universally applicable to all axle bolted hubs (5, 6 and 8 lug hubs). Used to safely remove the frozen hub assembly instantly without damaging the axle..
  • 【6007 Lower Control Arm Prying Tool】For most front-wheel drive vehicles. suitable for the lower control arm.
  • the eyelet end is suitable for any 7/8" crowbar. Used to help the installation of wheel bearings, front axles and CV joints..
  • 【Brake Caliper Hooks】used on variety of automotive repair work that related to brakes, wheel bearings, axle shafts and suspension servicing. Prevent the brake caliper from obstructing operation during maintenance, reducing damage to the brake caliper, brake hose and other parts..
  • 【Superior Material】Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant. Wheel Hub Removal Tool 3/4” steel backing plate and reinforced striking platefor a long-term and reliable performance..
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty..
Check Stock

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

  • SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
  • This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
  • This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
  • Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
  • Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
Check Stock

Team Associated RC8B4e Team Kit ASC80946 Cars Elec Kit 1/8 Off-Road

  • New rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning.
  • New captured CVA drive shafts design front and rear with center dogbone driveline.
  • New chassis layout featuring two shorty-style only battery configurations..
  • New RC8B4e specific side guards are narrower and feature integrated wire routing clips.
Check Stock

Ebike Universal Torque Arm for Electric Bicycle e-Bike Bike Front or Rear Hub Motors and Mid Drive e-Bike (T-2 for 16mm)

  • This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts.
  • The universal torque arm conversion kit is made of consistent quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • Even though it's a universal design, please check the size & diameters to make sure it fits your bike..
  • Consistent quality steel arm, hub mount, and C-clamp. Comes ready to be installed on either front or rear axle.
  • We are committed to making riding safer,If you have any questions about this universal torque arm kit , please reply to us by email and we will help you resolve any issues as soon as possible..
Check Stock

TIKSCIENCE Universal Torque Arm Conversion Kit,Fit for Electric Bicycle E-Bike Front or Rear 2 Set

  • ➤[Fitment] : This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm).
  • ➤[Excellent Function] : These versatile torque arms can be installed inside the frame/fork or outside.This torque arm will help prevent the motor from coming loose from the fork (front) or frame (rear) and also prevent the slotted axle from bending or breaking your dropouts..
  • ➤[Durable Material] : The universal torque arm conversion kit is made of high quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
  • ➤[You Will Get] : 2 x Steel torque arm.
  • 2 x Stainless steel nut and 5mm Allen bolt.
  • 2 x Slotted electric motor C washer as pictured..
  • ➤[About Service] : The universal torque arm conversion kit designed and manufactured meets stringent delivery standards, with precision inspections before shipment to ensure quality problems.The customer service period is 2 year. If you have any questions about our product, please reply to us by email and we will help you resolve any issues as soon as possible....
Check Stock

Wheel Kit, 6" Black Blow-Molded Hollow Plastic Wheels & Axle Caps for 3/8" Axle Shaft - Includes 2 Wheels & 2 Axle Caps (696561)

  • For battery chargers with 3/8" axle shaft. Also used on barbecue grills and other light equipment, check dimensions for proper fit. Replaces the following battery charger wheel sets: Associated 605672, Century 413-044-666, John Deere PT1598, PT16173, PT19357..
  • PLEASE NOTE THAT THESE WHEELS ARE FOR LIGHT-DUTY APPLICATIONS. DO NOT INSTALL THESE WHEELS ON 2-WHEEL EQUIPMENT THAT WEIGHS OVER 50 LBS. USE ONLY SMOOTH AXLE SHAFTS - DO NOT USE THREADED ROD. DO NOT USE SPACERS, SPRINGS OR SHIMS ON UNDERSIZE AXLES..
  • Kit includes 2 wheels, 6" black hollow plastic, and two 3/8" press-on axle caps. Steel axle caps are press-fit, no special tools required..
  • Load Rating: 25 lbs per wheel (50 lbs per pair).
Check Stock

TUSK Racing Axle Block Orange for KTM 530 EXC-R 2008-2011

  • Fitment: The Front Axle Nut Covers Compatible for Harley 2002-2011 VRSC (except VRSCF and VRSCR), for 2015-later XG, for 2008-later XL Sportster , for 2008-2017 Dyna, for 2007-later Softail (except Springer, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and for 2008-later Touring and Trike models. 2018-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS and FXLR models require separate purchase of Front Axle Adapter Kit..
  • Package Included: One Pair of Front Axle Nut Cover Bolt Kit.
  • Function: The Front Axle Nut Cover Caps can protect front axle hardware from dirt, moisture, dust..
  • Great Replacement:These Front Axle Nut Cover with spinning blades are great replacement for your old Axle Nut Covers..
  • Material: Housing made of ABS Plastic and inner made of Aluminum.
Check Stock

Chorme Spun Blade Spinning Front Axle Nut Cover Cap Nut Cover for Harley

  • Aftermarket replacement parts conceal your front axle hardware for an exclusive skull look.
  • Easy to install, Give the front axle a nice touch that said an improvement over the stock axle exposed.
  • Kindly Remind: Please check the measurement before order, You may have to modify both sides to fit your axle, a spacer might required for smaller axle nut.
  • Tips: Use loctite on screws to secure the caps in place.
  • Package Includes: 2x front axle nut caps, 2x set screws, 1x Allen key.
Check Stock

Tusk Racing Axle Block Orange - Fits: KTM 250 SX-F 2005-2012

  • ️Compatibility: Front axle nut cover with Electra Glides, s and Road Kings / Road Glides / Dynas / s / V-Rod (except VRSCR and VRSCF) / Softails (except Deuce, Springer and Rocker). - davidson breakout.
  • ️Fashionable appearance: low-key appearance, stylish design and classic colors, with decorative functions, stylish appearance and improved car grade. Make your car look more dazzling. Hidden front axle hardware makes the appearance look cleaner. - davidson accessories.
  • ️High quality: For for HARLEY Axle Nut Covers is made of high-quality CNC aluminum, sturdy and durable, which maximizes durability and ensures quality. If there is a quality problem....
Check Stock