Categories

Best Front Camera Flex Cable Replacement

2 Pairs OEM DJI 9450 Self-Tightening Propellers(Metal Hub), Use for Phantom 3 Pro/Adv/Sta, Phantom 2/2 Vision/2 Vision Plus

  • Replacement Flex Ribbon Cable Compatible for DJI Phantom 2 Vision Plus Gimbal Camera.
  • High Quality, Tear Resistant Polyimide (PI) with immersion Gold Finger contacts.
  • DJI Phantom 2 Vision+ OEM Gimbal Replacement Flex Ribbon Cable.
  • Same cable thickness as original DJI ribbon cable.
  • Engineered 100% DJI compatible with extra heavy power traces for higher performance.
Check Stock

Afeax Compatible with OEM Apple iPhone Face Front Camera Flex Cable with Sensor Proximity Light and Microphone Flex Cable Replacement for iPhone 8 Plus 5.5inch

  • 100% Brand New and Original.Tested one by one and is 100% working.
  • OEM Part includes the front camera,secondary microphone, and ambient light and proximity sensors..
  • Best replacement for damaged front face camera proximity light sensor flex cable for iphone 8 plus 5.5 inch.
  • We are confident with our product,and you will get a full refund if you aren't pleased with this product or have any problem.
Check Stock

Tailgate Emblem W/Reverse Backup Camera Replacement for 2004-2016 Ford F150 F250 F350 F450 F550 Flex (2009-2012) Rear Backup Camera W/Guideline | Night Vision | IP69 Waterproof

  • 【NOTICE】This emblem backup camera is aftermarket and will NOT work for FACTORY & OEM monitor and please measure your space and emblem before purchasing.
  • 【FITS】Replacement for 2004-2016 Ford F150 F250 F350 F450 F550 Flex (2009-2012),the tailgate emblem backup camera fits like OEM..
  • 【INSTALL】This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. There was plenty of cable to reach the front of the truck,On some older models, you may need to drill a small hole in your tailgate to run the wiring through..
  • 【CAMERA】HD wide-angle camera with 0.1Lux sensitivity to enhanced night visibility, it is very useful while reversing your truck and trailer. IP69 Waterproof, work normally even in bad weather..
  • 【WARRANTY】We provide 180 days warranty. During the warranty period, if you have any questions, please contact us first, and we will provide you with a new replacement..
Check Stock

YOXINTA Screen Replacement for iPhone 6s Plus White 3D Touch Screen LCD Digitizer Replacement Frame Display Assembly Set with Repair Tool Kits(6s Plus, White)

  • 《Quality Guaranteed》»：Each iPhone 6s plus screen replacement LCD was double tested before shippig and working perfectly,more wearable..
  • 《Great Replacement》»：To replace faulty, defective, cracked, dead black iPhone 6 plus digitizer replacement assembly with great color pixels and resolution display LCD as original..
  • 《Perfect Package》»：Screens and tools are packed in exquisite boxes and are not easily damaged or crushed..
  • 《Compatibility》»: Only fit for iPhone 6s plus 5.5 inch ( white）, NOT compatible for 6, 6 plus, 6s, and NOT including Home button, front-facing camera, proximity sensor flex cable, receiver, etc..
Check Stock

SummitLink Flex Ribbon Cable for DJI Phantom 3 Standard Gimbal Camera Replacement

  • DJI Phantom 3 Standard Gimbal Camera Replacement Flex Ribbon Cable.
  • High Quality, Tear Resistant Polyimide (PI) with immersion Gold Finger contacts.
  • Same cable thickness as original DJI ribbon cable.
  • Engineered 100% DJI compatible with extra heavy power traces for higher performance.
Check Stock

LNONLS USB Charger Charging Port Dock Connector Ribbon Flex Cable Replacement for iPad Pro 11 inch 2018 A1980 A2013 A1934 and iPad Pro 12.9 inch 3rd A1876 A2014 A1895 with Repair Toolkit(Black)

  • Brand New OEM Quality:100% perfect fit for iPad Pro 11 inch 2018 A1979 A1980 A2013 A1934 and iPad Pro 12.9 inch 3rd 2018 A1876 A1895 A1983 A2014..
  • Comprehensive Repair Kit: Complete Set Professional OEM Charger Port Connector Flex Cable with Screwdrivers,SIM Eject Pin,Nylon plastic spudger opening tool pry bar，Triangle plastic pry pieces openers..
  • Easy Installation: Accurate Replacement part used to Replace the broken damaged part! Perfect fit. You do not need a Technician to do it..
  • Notice:This is Charger Port Connector Flex Cable Module for replacement to replace your old damage charger flex module .Don't include instructions, If Your USB Charger module Broken, don't need to change new machine, just buy this item and replce your damage Main Back Rear Camera Connector Flex Cable Module, let your Device work again again.If you are the first time to do this job,We suggest you check the related video in internet (Will help your DIY smoother)!.
  • High quality product by LNONLS: Each part is tested before shipment, Item in Stock..
Check Stock

Pi Camera Arducam Octoprint Octopi Webcam Monitor 3D Printer 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards.
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
  • 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the....
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm....
Check Stock

Tab A 8.0 T387 USB Charging Port Flex Cable Replacement T387V T387W T387P T387T microUSB Charger Dock Board Flex Cable Connector for Samsung Galaxy Tab A 8.0 (2018) SM-T387 Port Flex Cable Repair Part

  • ★ COMPATIBLE MODELS --- The Tab A 8.0 inch T387 USB Charging Port Flex Cable Connector Replacement Compatible Only Fit for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V SM-T387A SM-T387P SM-T387T 2018 Version Charger Board Repair Part With Tools,Don't Fit For Samsung Galaxy Tab A 8.0 (2017) SM-T380 SM-T385..
  • ★ HIGH QUALITY --- The T387 Charging Port microUSB Flex Cable USB Charger Port 100% Tested Well Before Shipping Out .100% Perfect Fit for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V Charging Port Flex Cable Ribbon..
  • ★ WHAT YOU GET --- 1 Piece T387 Charging Port Flex Cable Replacement SM-T387 USB Charging Port Board Flex Cable for Galaxy TAB A 8.0 2018 T387V. 1 Set Repair Tools..
  • ★ IMPOTANT --- Please Double Make Sure Your Phone Model is SM-T387 Before Buy the Replacement USB Charging Port Board Flex Cable for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V .It is Don't Fit Don't Fit For Samsung Galaxy Tab A 8.0 (2017) SM-T380 SM-T385..
  • ★ ATTENTION: The T387 Charging Port Don'T Include The Installation Instructions. Please Make Sure That You Can Repair It Before Buy The TAB A 8.0 2018 T387 Charging Port Flex Cable.The SM-T387V USB Port Flex Cable Is Replacement Part For Your Damage Or No Working SM-T387 Charging....
Check Stock

iPhone 8 Plus Screen Replacement Black 3D Touch Screen LCD Digitizer Replacement Frame Display Assembly Set with Repair Tool Kit (iPhone 8 Plus Screen, Black)

  • Compatibility: Only fit for iPhone 8 Plus 5.5 inch ( Black, NOT compatible for 8, and NOT including Home button, front-facing camera, proximity sensor flex cable, receiver, etc..
  • Quality GuaranteedEach iPhone 8 Plus Screen Replacement LCD was double tested before shippig and working perfectly,more wearable..
  • Great ReplacementTo replace faulty, defective, cracked, dead black iPhone 8 plus digitizer replacement assembly with great color pixels and resolution display LCD as original..
  • Easy to InstallYou just watch a YouTuBe video, according to the video operation,you can easily install a new screen..
  • Perfect PackageScreens and tools are packed in protective bag and are not easily damaged or crushed..
Check Stock

MELIFE Octoprint Octopi Webcam Mini Camera Video Module 5 Megapixels Monitor 3D Printer with 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi A/B/A+/B+, 2, 3, 3B+

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards..
  • Come with extra 100cm/3.28ft extension cable, long enough for mounting the camera, especially useful when you don¡¯t want to place the camera near the Raspberry Pi..
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series and 1 5MP camera module. Cable for Pi zero is not included..
Check Stock

Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space Project, Work with V2 Camera on Jetson Nano

  • Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between. It does NOT support 5MP V1 cameras or any other sensors..
  • Fresh Look: Give your Raspberry Pi Camera Module V2 a fresh look by freeing the sensor from the camera board without losing the traditional flex ribbon cable extension.
  • Fresh View: Having got rid of the restrictions caused by the camera board, you can now see in a new perspective and put the camera in a smaller enclosure and narrow space, like through a small hole or a tube.
  • Fresh Option: The extension cable is compatible with Arducam IMX219 Sensor drop-in replacement modules including IMX219 autofocus and IMX219 M12 lens series. Those combinations will also work with the NVIDIA Jetson Nano.
  • Note: Please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. The Raspberry Pi Camera Module V2 is NOT included..
Check Stock

Replacement Left Right L R Speaker Loudspeakers for NDSL DS Lite Console

  • SD Card Reader Slot & L/R Shoulder Button Module Flex Cable Replacement Compatible with Nintendo DSi.
  • Tips: This is SD Card Reader Slot & L/R Shoulder Button Module Flex Cable replacement to replace your old damage SD Card Reader Slot & L/R Shoulder Button Module Flex Cable, don't include instructions, please install it by a professional technician..
  • Broken your SD Card Reader Slot & L/R Shoulder Button Module Flex Cable, don't need to change new machine, just buy this item and replce your damage SD Card Reader Slot & L/R Shoulder Button Module Flex Cable, let your Device work again again..
  • Compatible with: Nintendo DSi (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
Check Stock

BIGTREETECH Octopus V1.1 32Bit Control Board + TFT35 E3 V3.0 Touch Screen+ 8PCS TMC2209 v1.2 Stepper Motor Driver DIY Voron 3D Printer Controllers for Raspberry Pi Model

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards.
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
  • 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the....
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm....
Check Stock