Categories

Best Front Strut Tool

Detroit Axle - Pair 2 Front Quick Ready Struts and Coil Springs + 2 Front Stabilizer Sway Bar Links Replacement for 2007-2010 Sebring 2.4L FWD Sedan - [2008-2014 Dodge Avenger 2.4L FWD Sedan]

  • Replacement for 2008-2014 Dodge Avenger (2.4L FWD Sedan) - [2007-2010 Chrysler Sebring (2.4L FWD Sedan)].
  • Kit Includes: (2) Front Ready Strut Assembly and (2) Front Sway Bar Links.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

Detroit Axle - Front Strut w/Coil Spring Assembly + Rear Shock Absorber Replacement for 2003-2007 Saturn Ion Excluding RedLine - 4pc Set

  • Replacement for 2003-2007 Saturn ION (Excluding RedLine).
  • Kit Includes: (2) Front Quick-Install Ready Strut Assembly and (2) Rear Shock Absorber.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set

  • Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
  • This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
  • This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
  • Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check Stock

ATLIN Strut Spreader Tool – Strut Socket for Audi, VW, BMW, Mini, Ford

  • Compatibility – The ATLIN strut spreader is designed to fit any vehicle equipped with a pinch bolt style hub which is commonly found on Volkswagen, Audi, BMW, MINI, Ford vehicles. Some compatible models include the 2005+ VW Golf GTI, Jetta, and Passat.
  • Superior Design – Audi and VW spindle housings may require a significant torque to spread apart. Unlike other brands, the ATLIN strut removal tool features an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel.
  • Low Profile – Most strut socket tools are difficult to use due to their length. The ATLIN strut spreader tool was designed to be as low profile as possible, allowing it to fit in tight spaces, thus making your job much easier.
  • High Quality – Crafted from hardened S2 tool steel, a material used in premium tools and known for its extreme toughness, this spreader socket will not yield under high torque applications.
  • Size & Materials – 1/2” drive, pry bit measures 5.5x8.2mm, S2 tool steel, chrome vanadium (CR-V).
Check Stock

Detroit Axle - Front & Rear Struts & Coil Spring Assembly Replacement for Lexus ES350 Toyota Avalon Camry - 4pc Set

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Strut w/ Coil Spring Assembly + 2x Rear Strut w/ Coil Spring Assembly.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

OMT Spring Compressor 11-1/2 Macpherson Strut Spring Compressor 13/16 Socket 1/2 Drive to Compress The Coil Spring Set of 2

  • ...d spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)..
  • Constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair novice..
  • 1-YEAR WARRANTY: Orion Motor Tech backs these spring compressors with a generous 1-year warranty as well as our usual friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!.
Check Stock

BILITOOLS Strut Spreader Tool 2 Piece Suspension Tool Compatible with VW Audi BMW Mini Ford Renault ect.

  • Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
  • 2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
  • The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
  • The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
  • Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.
Check Stock

Bilstein B4 Front Struts & Rear Shock Absorbers Kit For BMW E90 E91 E92 3.0L L6

  • This package contains 2 front driver and passenger side complete struts. Each complete strut comes pre-assembled with a strut, coil spring, strut mount, boot, bumper kit, spring seat and isolator. A spring compressor is not required for installation.
  • OE / Interchange: 172901, 182901, 172902, 182902. Each strut is nitrogen gas charged.
  • ISO / IATF 16949 Certified, direct fit and made from high quality materials to meet OEM specifications. Backed by a 6-month warranty.
  • Replacement for 2013 2014 2015 2016 2017 Nissan Altima 2.5L 3.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. Purchased bundles may only be returned as a complete bundle. Partial returns of bundles are not permitted.
Check Stock

UTMALL Suspension Strut Spreader Tool Mechanical Spreader Car Shock Absorber Ram Strut Remover External Hexagon 17MM

  • This suspension strut spreader tool separates the suspension strut from the wheel bearing seat by being stuck in the gap, and only needs to rotate the outer hex to separate it, which is easy to operate..
  • The extension range of this Suspension Strut Spreader Tool is: 5.1-11.4MM, suitable for most models, with a wide range of applications, compatible with Audi, VW, BMW, etc..
  • It not only can quickly separate the suspension strut from the wheel bearing seat for easy removal and adjustment, but also saves time & effort, saves the time of the repairman, and improves work efficiency..
  • The suspension strut spreader tool is output through the parallel pressure surface and spreads smoothly, which can effectively prevent the tool from accidentally jumping out or slipping off, and protect the suspension strut and wheel bearing..
  • Designed for disassembly and assembly of extended suspension struts and ball joints, external hexagon rotation design, built-in booster drive, can smoothly separate suspension struts and ball joints..
Check Stock

5pcs Strut Nut Socket 18mm 19mm 21mm 22mm 24mm with 12 Point 1/2 Drive Suspension Strut Nut Socket Tool Easy Remove Strut Nuts

  • 【Specification】 18mm, 19mm, 21mm, 22mm, 24mm strut nut socket with 12 point design, 1/2" square drive slot, The length is 3.1 inches. Various size can meet many different vehicles..
  • 【Function】 Specially designed to remove and install the locking nut on front suspension strut when replace the units. Compact and simple design, easy to carry and use..
  • 【Easy to Use】The strut nut sockets with cut out design allows 90° hex key to hold the strut whilst tightened to correct torque with a torque wrench.These suspension strut sockets can withstand 65-75 N..
  • 【High Quality】Made of high hardened 4140 impact grade steel,with black oxide coating which is great strength, not ease bent, rust-resistance and durable to use..
  • 【Satisfaction Guarantee】If you're not 100% satisfied with this Tool , simply return it for a full refund in 30 days, guarantee with 12 months’ warranty..
Check Stock

Monroe Shocks & Struts Quick-Strut 171377R Strut and Coil Spring Assembly

  • Replacement for 2005-2010 Jeep Grand Cherokee Excluding SRT8 Models - [2006-2010 Jeep Commander].
  • Kit Includes: 2x Front Strut Assembly + 2x Rear Shocks.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock