Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

Complete Fuel System Cleaner, Fuel Cleaner Deep Cleans Entire Fuel System, 5.25 Oz, STP

  • Concentrated, high-temp detergents clean your carburetors or fuel injectors, fuel lines, tank, intake valves, combustion chambers and fouled plugs.
  • Improves fuel economy, throttle response, hesitation and stalling.
  • Compatible with both pump gas and race fuel, pre-mixed or injected two-strokes.
  • Cleans deposits on intake valves and combustion chambers, lubricates upper cylinder.
Check Stock

BOSCH (FIX 7803 Vacuum and Pressure Tester Kit, Black

  • Great way to fine tune carburetion and timing for peak performance and maximum fuel economy.
  • Use to test fuel pump pressure, mechanical condition of the engine, vacuum control system function, and much more.
  • Use to find: intake manifold leaks, blown manifold and head gaskets, worn piston rings, burned valves, and leaking vacuum lines on conventional and computer-controlled vehicles.
  • Easy-to-read, 3-1/2 inch diameter face displays 0-30 inches vacuum (0-70cm) and 0-10 pounds (0-70 kPs) of pressure in both standard and metric scales.
  • Includes gauge, hose, multiple adapters, and detailed usage and testing instructions in English, Spanish, and French. Note: fuel system functions are for carbureted engines only - not for use on fuel injected vehicles.
Check Stock

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

  • Fits 5/16 inch and 3/8 inch inside diameter fuel line.
  • Not for fuel injected systems, Max inlet pressure 9 PSI.
  • Adjusts fuel pressure from 1 to 6 pounds.
Check Stock

2 Bottles of New BG 44K Platinum

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....
Check Stock

Fuel Transfer Hose, Fuel Hose 3/4\ x 20' (6 m), 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose

  • 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose. Designed for use with all electric fuel transfer pumps..
  • Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils..
  • One end of thread is 3/4 In. NPT, the other end is 1-inch NPT. Length 20 ft..
  • This Fuel Transfer Hose 3/4 inch may also know as fuel transfer hose 1 inch,1 inch fuel hose 20 feet, Fuel pump hose,Farm Tank Fuel hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Pump hoses,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Fuel hoses,Diesel fuel line hose,Fuel fill hose,Fill hoses,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose..
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. (use with a 1/2" drive ratchet or breaker bar).
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

Rislone Cat Complete Fuel, Exhaust & Emissions System Cleaner, Check Engine Light Medic

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

EFI Fuel Injected Motorcycle Gas Tank Frisco Mount Shallow Tunnel 2.5 Gal Sportster Bobber Style Harley Davidson Nightster Iron Low Forty Eight SuperLow Chopper Custom XL 883 1200 XL883 XL1200 07-2020

  • Excellent Quality ( Not Made in China ) New Motorcycle Gas Tank Frisco Tunnel EFI Fuel Injected Harley Sportster 2007 to 2020 XL 883 1200 XL883 XL1200.
  • Frisco tunnel Utilizes stock fuel pump and Stock fuel cap, Rear of tank reduced 1” from stock.
  • 2.5 gal capacity / 15" long x 9.25" wide x 7.75" tall low shallow Frisco tunnel.
  • Thanks for Looking at our Quality items, Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • The Frisco style gas tank is a throwback to sixties show bikes. Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI). The custom tank will use the stock fuel pump and gas cap and is a direct bolt on part. No drilling, welding or fabrication of mounting points is required. The notorious flat spot removed from the top of the tank. This is a Frisco mount tank so it will sit high up on the back.
Check Stock

Chevron TECHRON Complete Fuel System Cleaner - 12 OZ.

  • RESTORES PERFORMANCE: Fuel injector cleaner cleans entire fuel system to help restore lost engine power.
  • INCREASED RESPONSIVENESS: Helps restore lost acceleration and throttle body response.
  • REDUCES CARBON DEPOSITS: Injector cleaner helps remove carbon buildup for increased power and acceleration.
  • SAFE ON ALL ENGINES: Specially formulated for direct injected or traditional fuel injected engines.
  • TREATS A FULL TANK: Formulated to treat up to 21 gallons of gasoline.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Rislone 4720 Cat Complete Fuel, Exhaust & Emissions System Cleaner, Check Engine Light Medic (4 Pack)

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock