Categories

Best Fuel Injection For Big Block Chevy

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

JDMON Compatible with Fuel Injectors Chevy Impala Malibu Monte Carlo Venture Pontiac Aztek Grand Am Prix Montana Buick Custom Rendezvous Oldsmobile Alero Silhouette 2000-2005 3.1L 3.4L 6Pcs

  • ... of the engines cylinders consistenly, helping to maximize the efficiency and performance of your vehicles engine..
  • Recommendations for regular cleaning of fuel injectors: Generally speaking, if the car is in good condition and the fuel quality is good, it can be done every 40,000-60,000 kilometers. Even if the fuel injection nozzle is slightly clogged, you don't need to be too nervous, because the impurities can be sprayed and dissolved when accelerating at a high gear. It is recommended that car owners should often run at high speeds when driving daily to reduce the possibility of carbon deposits..
Check Stock

A-Team Performance - Steel Key-Way Power Steering Pump Pulley Single Groove - Compatible with 1955-72 GM Chevrolet SBC BBC Small and Big Block Chevy SBF Small Block Ford Black

  • Steel Key-Way Power Steering Pump Pulley Single Groove, Black.
  • Compatible with 1955-72 GM Chevrolet SBC BBC Small and Big Block Chevy SBF Small Block Ford.
  • V-belt Pulleys — Compatible with small and big block Chevy and small block Ford. A-TEAM'S steel pulleys provide affordable style and reliability, quality-tested to ensure trouble-free performance and durability.
  • Available in multiple finishes, A-TEAM'S got v-belt pulleys for small and big block Chevy and small block Ford.
  • Easy to install and helps restore power steering to proper functioning.
Check Stock

LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock

  • ✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
  • ✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
  • ✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
  • ✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

Autek Throttle Response Controller compatible for 2012-2021 Chevy Coloroda PC07 Wind Booster Fuel Pedal Electronic Commander,silver(PC38)

  • ...he best throttle response controller on the market. The acceleration sense from weak to strong is very obvious, and no effect the throttle control capability..
  • [GAS SAVING] The Pedal throttle response commander’s significantly slow response can increase your compatible for 2012-2021 Chevrolet Colorado, adjust fuel Injection and save you up to 20% in fuel economy. (PC-07).
  • [QUICK EASY INSTALLATION] A simple plug-and-play device that takes only about 5-10 minutes to install. No need for Bluetooth which might often lose connection and hard to pair. No need to download any APP. All adjustment must be in a SAFE driving convenient. (Note: This electronic throttle controller apply for cars with ELECTRONIC THROTTLE only. Please make sure your car is Electronic accelerator with plug, our product not support Mechanical accelerator.).
  • Compatible with vehicle type: Compatible for 2012-2021 chevy Colorado.
Check Stock

1965-72 Compatible/Replacement for Chevy Big Block 396-427-454 Short OEM Style Steel Valve Covers - Chrome

  • Chevy big block OEM style chrome steel valve covers fit 1965-72 Chevy 396-427-454 big block engines..
Check Stock

1965-72 Compatible/Replacement for Chevy Big Block 396-427-454 Short OEM Style (Recessed Corner) Steel Valve Covers - Chrome

  • Chevy Big block OEM style chrome steel valve covers fit 1965-72 Chevy 396-427-454 big block engines..
  • Driver side has a recessed corner for corvettes or cars with power brakes..
Check Stock

OKAY MOTOR IAC Idle Air Control Valve for Chevrolet GMC Pontiac Cadillac Trucks 4.8L 5.3L 5.7L 6.0L V8

  • Fuel Injection Idle Air Control Valve For Chevy Chevrolet GMC Cadillac Pontiac 4.3L 5.3L 5.7L 6.0L V8.
  • Description: Chevy Escalade Avalanche Silverado Suburban GMC Yukon Sierra Cadillac Pontiac.
  • OEM Part Number: AC234, 17113598, 89053319.
  • 180-days manufacturer type warranty limited.
Check Stock

Exhaust Bellows Replace Mercruiser 3-4' 70981A3 Sierra 18-2762 Mallory Marine 9-72808

  • Upper Exhaust Bellows for Mercruiser 3-4" 70981A3 3.0 3.7 5.0 5.7 18 2762 89070.
  • 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
  • After market Ref:Mercruiser:70981A3,Mallory Marine: 9-72808,Sierra: 18-2762,GLM: 89070.
  • Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow.
  • used: 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

NEW RAM 11" CLUTCH & BELLHOUSING KIT WITH GM 621 3899621 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, CLUTCH FORK BOOT & CLUTCH PIVOT BALL, PRESSURE PLATE, 26 SPLINE DISC, FLYWHEEL, SBC BBC CHEVY

  • ...55, 901180) > Fits transmissions with 1 5/32"-26 spline input shafts and Chevy engines with a 2 piece rear main seal.
  • The Southwest Speed 11" Performance Cast Aluminum Bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block and Small Block engines > This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, fit, and perform just like original > If you are doing a restoration of an early muscle car, or just want the correct bellhousing to finish that rod project, this bellhousing is the perfect part.
  • Fits: > 1964-1988 Chevy Chevelle, Malibu, Monte Carlo* > 1959-1987 Chevy El Camino* > 1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery* > 1963-1981 Chevy Corvette* > 1967-1981 Chevy Camaro* > 1968-1974 Chevy II, Nova* > *With Manual Transmissions and 168 tooth Flywheel > The bellhousing was used with 4 speed transmissions in 66-72 Chevelle, 66-81 Corvette, 67-72 Camaro, 68-72 Nova, and 64-81 Impala.
  • This new Chevy high performance 11" aluminum bellh....
Check Stock

Moroso 62205 Oil Pump Primer for Small and Big Block Chevy

  • Small Block Chevy, Big Block Chevy, and 90� V6 engines.
  • This oil pump primer offers a superior design.
  • Includes bushing to pressurize the valvetrain.
  • Primes the oil pump right through the distributor hole using an electric drill.
Check Stock