Categories

Best Fuel Line Tool For Small Engine

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch

  • SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance.
  • Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements.
  • No need to drain systems before servicing.
  • Ratcheting jaws allow for automatic locking to save you even more time.
  • EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off.
  • 3-IN-1 SET: Package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area.
  • VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank.
  • This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel l....
Check Stock

1/4 inch Fuel Hose Line, Gas Petrol Fuel Line Fuel Line Assembly 3 Feet for Motorcycle Dirt Pit Bike ATV (Yellow)

  • 【 Wide Application 】– Fits for most small engine, can be a perfect replacement fuel line and fuel filter for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
  • 【 Premium Abrasion Resistant Quality 】– This petrol fuel line is ideal for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors! High Quality Petrol Fuel Line, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature..
  • 【Universal Fuel Line Design】– Universal fits for most motorcycle, such as for Honda, Suzuki, Yamaha, etc.Length: 1m / 39.37″/ 3.28 ft.
  • Outside Diameter: 1/4 inch/7mm outside diameter.
  • 【 1/4 inch Fuel Hose Line 】– The outside diameter of the petrol fuel line hose is 1/4 inch/7mm.
  • 【 What You Will Get 】– We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check Stock

CASOMAN 3PC Hose Pincher Pliers Set, Locking Ratcheting Hose Pinch Off Pliers for Automotive Hose Lines, Radiator Lines, Fuel Lines, Coolant Lines

  • The metal pliers sets are durable an safe to use on all hosers, make it more faster and easier than plastic hoe pinchers..
  • 3Pcs Hose Pincher Pliers Set Include: a small 8-inch long tool with a 1.9-inch contact area.
  • a medium 10-inch long tool with a 2.5-inch contact area.
  • a large 12-inch long tool with a 2.5-inch contact area..
  • Easy to use, simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off..
  • Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank..
  • When performing fuel line or coolant maintenance, this set can be safely used for automotive hose lines, fuel lines and coolant lines without damage..
Check Stock

Keenso 1/4 inch 3 feet Fuel Line Hose For Dirt Bike Petrol for Motorcycle Dirt Pit Bike ATV Snowmobile PWC Jet Ski Polyurethane (Fluorescent Yellow )

  • 【Corrosion Resistant】-- Fluorescent Yellow Fuel Hose For Dirt Bike, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature. Can withstand differences in weather conditions.
  • 【Smooth Lining】-- The lining is smooth, fluid resistance small, less hydraulic loss. Can resist extreme heat, abrasion and corrosion. Low-cost and flexible, easy to install.
  • 【Wide Application】-- Fits for most small engine, can be a perfect replacement fuel line and fuel filter for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
  • 【Note】-- Atv Fuel Line, no compatible with greater than 10% ethanol fuel.
  • 【Size】-- 1/4 inch/7mm outside diameter, 0.17inch/4.5mm inner diameter and 3.28 feet/1 m long. Warranty time: 6 months, 100% trust!.
Check Stock

STA-BIL Fast Fix - Small Engine Treatment, Cleans Carburetors and Injectors, Fixes Rough Running Engines, Eliminates Water, Treats Up to 20 Gallons, 8oz (22304) , Green

  • FIXES ROUGH RUNNING ENGINES – STA-BIL Fast Fix eats away at gum and varnish that cause rough starts and no starts in your small engine equipment. This easy-to-use fuel additive combats the effects of ethanol blended gasoline..
  • ELIMINATES WATER – This fuel injector cleaner helps to remove water that may get into your fuel system. Penetrating deep into the fuel line, this simple fuel additive prevents the need to disassemble the engine. The 8 oz. bottle of this alcohol-free fuel additive treats up to 20 gallons of fuel..
  • VERSATILE – Compatible with all small engines, adding STA-BIL Fast Fix to your 2-cycle or 4-cycle small engine cleans carburetors and injectors while acting as a water remover. Use this product in your lawn mower, chainsaw, trimmer, snow blower, generator, and more..
  • DIRECTIONS – For rough running engines use 1 oz. of STA-BIL Fast Fix per 2.5 gallons of fuel. Fill with fresh gas. Start the engine and allow to run for 15 minutes to allow the additive to work its way through the fuel system. If the engine does not start, attempt to turn it over a few times so the additive makes its way through the fuel system and allow to sit overnight. Attempt to start again, if problems persist you may need to have it looked at by a mechanic..
Check Stock

TamerX 18mm Diesel Fuel Injector Cap/Block-Off Tool for 2007-2017 Dodge/Cummins 6.7L (Individual)

  • Includes 1 diesel fuel injector block-off tool..
  • An essential tool for anyone who works on 6.7L Common Rail Cummins Engines.
  • Helps in identification of faulty diesel fuel injectors and also used to diagnose engine knock sounds.
  • This tool will also work on other vehicles with a 18mm fuel line nut.
Check Stock

kweiny Diesel Common Rail 18mm Fuel Injector Cap Block Off Tool

  • Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
  • Compatibility: Fit with 2006-2011 6.6L Chevy/GMC Duramax (LBZ & LMM) and for Dodge/Cummins 2007-2017 6.7L, Renault engine system, and other vehicles with a 18mm fuel line nut.
  • Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
  • Specification: M18x1.5mm internal thread nut.
  • Material: Carbon tool steel, surface antirust..
Check Stock

Keenso Colorful Gas Fuel Line Hose Tube Pipe Petrol 1/4 inch 3 feet for Motorcycle Dirt Pit Bike ATV Snowmobile PWC Jet Ski Polyurethane(Red)

  • High Quality Petrol Fuel Line, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature. Can withstand differences in weather conditions.
  • The lining is smooth, fluid resistance small, less hydraulic loss. Can resist extreme heat, abrasion and corrosion. Low-cost and flexible, easy to install.
  • Fits for most small engine, can be a perfect replacement fuel line and fuel filter for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
  • No compatible with greater than 10% ethanol fuel.
  • 1/4 inch/7mm outside diameter, 0.17inch/4.5mm inner diameter and 3.28 feet/1 m long. Warranty time: 6 months, 100% trust!.
Check Stock

Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet

  • Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT..
  • Material: This small engine fuel line is made of high-quality NBR, which is oil resistant..
  • Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F..
  • Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase..
  • How To Use: Use hose barbs and fuel line clamps to install..
Check Stock