EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 25FT 300PSI

  • Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm)..
  • Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc..
  • Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase..
  • EVIL ENERGY provide 25ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock

Jarrow Formulas Organic MCT Oil Unflavored - 16 fl oz Pack of 2 - Fast Fuel for Brain & Muscles - Caprylic C8 + Capric Acid C10 - Keto Friendly - Approx 64 Total Servings

  • Fast Fuel: MCT oil is rapidly absorbed, and provides fast fuel to the body for the brain and muscles.
  • Caprylic plus Capric Acid: MCT oil is a natural source of caprylic (C8) and capric (C10) fatty acids with a minimal amount of lauric (C12) acid....
  • 100 Percent Coconut Oil: Jarrow Formulas MCT Oil is made from 100 percent coconut oil.
  • It’s odorless, unflavored, low carb, keto friendly, and....
  • Suggested Use: Take 1 tablespoon per day on an empty stomach or as directed by a healthcare professional.
  • Can be mixed into coffee/tea, added to....
  • Superior Nutrition and Formulation: The goal of Jarrow Formulas is to promote optimal health with high-quality, effective, affordable, and superior....
Check Stock

FEWENi 80cc 2 Stroke Bicycle Engine Motor Gas Motorized Bike Motor Kit

  • Ambienceo 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,which enable you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit fits most 26" or 28" wheeled bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 5 horsepower/6000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting..
Check Stock

Airtex OS75 Oil Pressure Switch

  • Airtex oil pressure safety switches stop electric fuel pump upon engine shut-off per I.C.C regulations.
  • Prevents fuel from continuing through the system in the event of an accident.
  • Use with any universal in-line electric fuel pump.
  • 100 percent tested throughout the entire manufacturing process for worry free, out-of-the-box performance.
Check Stock

TRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)

  • 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
  • Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock

MOTOOS 80CC 24' 26' 28' Bicycle Engine Kit Bike Bicycle Motorized 2 Stroke Cycle Motor Engine Kit (Silver)

  • MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Black)

  • MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

60\ Hustler Raptor SD Tune-Up Kit (with Kawasaki FR Engine)

  • Stens Carries A Wide Variety Of Oem/Aftermarket Replacement Parts For Small Engine Outdoor Power Equipment.
  • Includes Air Filter 100-131, Pre-Filter 100-743, Oil Filter 120-485, Fuel Filter 120-562, 2 Spark Plugs 130-191, Motor Oil 770-107, Motor Oil 770-311, And 2 Hose Clamps 120-113.
Check Stock

80cc Bicycle Engine Kit 26' 28' Bicycle Motor Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade Silver

  • Bicycle 26 & 28 inch: Fits for most 26″ or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

  • Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

Universal Electric Fuel Pump Kit for All 12V Cars Trucks Boats Carburetor Lawn Mower, DC 12V (3-6PSI) Fuel Pump+ 2M 5/16" ID Fuel Line + Fuel Filters + 10pcs Hose Clamp

  • Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA.
  • which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel..
  • - : Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient..
  • : You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower..
  • : The wall thickness is 3.2mm. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance..
Check Stock

OTOHANS AUTOMOTIVE Outboard Fuel Pump with Gasket for Johnson Evinrude 438556 433387 20-140 hp 48/90/115 18-7352

  • Fuel Pump Compatible with Johnson Evinrude 20hp 25hp 28hp 30hp 33hp 35hp 40hp 45hp 48hp 50hp 55hp 60hp 85hp 88hp 90hp 100hp 112hp 115hp 140hp Replace....
  • A top quality oil pump separator. This oil pump separator may not be the cheapest around, but it is well made, high flow and will handle fluids that....
  • Suitable for virtually all fluids, this will handle kerosene, oils, water etc..
  • Hole Distance: 40mm/1.57inch,Hole Diameter: 5.5mm/0.22inch,Package include: 1 x Fuel Pumpp, 1 x Gasket.
  • Aluminum alloy low pressure casting, high density, not easy to leak oil.
Check Stock

TFCFL 100CC 2-Stroke Bicycle Gasoline Engine Motor Kit, Bike Bicycle 44 Tooth Motorized Petrol Gas Motor Engine Kit

  • The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Comes with all needed accessories for easy installation..
  • Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.Suitable for most 26" /28"bikes..
  • Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air..
  • 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).
Check Stock