Categories

Best Fuel Pump Assemblies

Coleman 3000005094 Lantern and Stove Pump Cup Replacement

  • Coleman replacement pump cup with backup plate..
  • This kit includes one leather pump cap, one metal nut, and one plastic cap. These parts sandwich together inside the pump so that the leather cap can create an air seal when pumped..
  • Note that the leather cap will need to be oiled before use, which can be found as part #: 200K2251 (not included)..
  • Fits pump assemblies on all Coleman stove and lanterns with fuel tanks, including models 222, 226, 229, 400, 440, 442, 445, 450, 550, 3022 and 3024..
Check Stock

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

OTC Tools 5080A Leaf Spring Pin and Bushing Service Set (Truck Front)

  • Delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily.
  • Services bushings with diameters from 1-1/4 inch through 1-7/8 inch and pin diameters from 7/8 inch through 1-1/8 inch.
  • Handles all popular OE and aftermarket components including Horton pin and bushing assemblies.
  • Service bushing assemblies in many cases without removing leaf spring hangers and spring assemblies from the vehicle.
  • All accessories are included except the hydraulic hand pump which must be purchased separately.
Check Stock

Fuel Transfer Hose, Fuel Hose 3/4\ x 20' (6 m), 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose

  • 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose. Designed for use with all electric fuel transfer pumps..
  • Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils..
  • One end of thread is 3/4 In. NPT, the other end is 1-inch NPT. Length 20 ft..
  • This Fuel Transfer Hose 3/4 inch may also know as fuel transfer hose 1 inch,1 inch fuel hose 20 feet, Fuel pump hose,Farm Tank Fuel hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Pump hoses,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Fuel hoses,Diesel fuel line hose,Fuel fill hose,Fill hoses,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose..
Check Stock

Universal Fuel Pump Removal Tool Adjustable Fuel Pump Lock Ring Tool Fuel Tank Lock Ring Tool Fuel Tank Repair Kit 5.31 to 7.17 Adjustable Lock Ring Spanner

  • Widely Fitment: This fuel pump removal tool Use for symmetrical holes type & 5 or 7 holes type fuel tank lid. (Check the type of the lock ring of your....
  • Adjutable Size: This fuel tank lock ring tool has a large adjustment range (5.83~7.83inch) which is suitable for different oil pump lock rings..
  • A MUST HAVE TOOL: This universal fuel pump removal tool will help tackle the job of replacing the fuel sender fast and effective without damaging the....
  • Intended Use: This fuel pump ring removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending....
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on....
Check Stock

Carter Universal Electrical Fuel Pump Automotive Replacement 12V (P4600HP)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • INCREASED FUEL EFFICIENCY: Carter electric fuel pump provides accurate fuel needs while adjusting to your vehicle pressure accordingly. Feel safer on the road while receiving your vehicle's maximum power potential..
Check Stock

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Carter In-Tank Universal Electric Fuel Pump Automotive Replacement 12V (P4389)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • INCREASED FUEL EFFICIENCY: Carter electric fuel pump provides accurate fuel needs while adjusting to your vehicle pressure accordingly. Feel safer on the road while receiving your vehicle's maximum power potential..
Check Stock

Kohler (2 Pack) 45 883 02-S1 Engine Air Filter With Pre-Cleaner Kit For K341, M10 - M16, KT Dome Style, CV17 - CV25

  • 47-559-11-S Fuel Pump Replaces Obsolete Part Numbers: 4755901-S, 4755904-S, 4755910-S, 47-559-02-S, 47-559-01-S, A-235845-S and A-235807-S.Replace Kohler 12-559-04-S,47 393 19-S,47 393 61-S,47 559 04-S,47 559 11-S..
  • 47-559-11-S Fuel Pump compatible with Kohler engine:K301-47722 K301-47725 K301-47726 K301-47730 K301-47731 K301-47745 K301-47746 K301-47755 K301-47762 K301-47765 K301-47766 K301-47769 K301-47770 K301-47771 K301-47813 K301-47814 K301-47828 K301-47831 K301-4775 K301-4780 K301-4773 K301-4784 K301-4786 K301-4794 K301-4795 K301-4796 K301-4797 K301-4798 K321-10202 K321-10210..
  • 47-559-11-S Fuel Pump compatible Kohler engine:K241-46428 K241-46429 K241-46430 K241-46431 K241-46432 K241-46433 K241-46434 K241-46439 K241-46443 K241-46444 K241-46446 K241-46447 K241-5105A K241-5106A K241-5107A K241-5108A K241-5109A K241-51100A K241-51100C K241-51100D K241-51100E K241-51101A K341..
  • 47-559-11-S Fuel Pump fits for Gravely 38789,John Deere AM134269.AKA 12-559-04-S Fuel Pump,K341 Fuel Pump,K301 Fuel Pump,K241 Fuel Pump,K341 Fuel Pump Rebuild Kit..
  • K341 Fuel Pump compatible with Kohler Magnum Series Engine:M10-461524 M10-461543 M10-461550 M10-461551 M12-471525 M12-471529 M12-471534 M12-471535 M12-471559 M12-471567 M12-471568 M12-471573 M12-471574 M12-471575 M12-4....
Check Stock

Surwit Electric Fuel Pump Assembly Compatible with Volvo Penta 4.3L 5.0L 5.7L 5.7OSXI 5.7OSI 5.7GXI 5.0GXI 5.7GI 5.0OSI 4.3GXI 4.3OSI Part# 21608511 21545138

  • This assembly is actually made of two pumps along with a fuel reservoir. The low-pressure pump pulls the fuel from the fuel tank in the boat and deposits it into a small reservoir on the assembly. The high-pressure pump provides fuel to the fuel injection system. The fuel pump assembly reservoir is a small fuel tank mounted on the engine. It fills continually with fuel from the main fuel tank by the low-pressure pump and then is delivered to the engine fuel rail by the high-pressure pump..
  • This Electric Fuel Pump Assembly fits for Volvo Penta 4.3L 5.0L 5.7L for 5.7OSXI 5.7OSI 5.7GXI 5.0GXI 5.7GI 5.0OSI 4.3GXI 4.3OSI. Customers can find the product you need accurately according to the OE number. OEM replace part number: 21545138, 21397771, 3594444, 3861355, 3860210..
  • This assembly can greatly affect the way your motor burns fuel, and subsequently, how much power your engine generates. Once a boat part has failed, it's obviously too late to repair it. For performance of your boating, this fuel pump assembly is one component you can’t ignore..
  • Over time, your fuel pump assembly may wear out and require replacement. Our each product is manufactured to the same specifications as the factory, and constructed with precision machined parts, you can purchase i....
Check Stock