Categories

Best Fuel injected Engine

Diesel Engine, TBVECHI 4 Stroke 196CC Engine Air Cooling Single Cylinder Motor Recoil Hand Start 53mm Shaft Length 3000RPM 2.2KW, 3L Air Cooling Vortex Oil System

  • 【Self-Injection Fuel System】4 Stroke 6HP Diesel Engine, equipped with elf-injection fuel system, good atomization, low fuel consumption, more punctual fuel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【Good Cooling Performance】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【Superior Fuel System】Large capacity fuel tank, enhanced thickening, large fuel tank volume, special painting process, seam welding, and oil leakage. Optimize the fuel system and intake and exhaust systems to save energy and fuel. Alloy box, Enhanced thickening, fast heat dissipation, low oil temperature, light weight..
  • 【Application】Widely used in pasture management machines, irrigation and drainage machines, generator sets, small transport vehicles, small walking tractors and other small agricultural machinery fields..
Check Stock

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock

TamerX Vortec Spider Fuel Injector Assembly for Chevrolet/GMC 4.3L

  • TamerX Spider Fuel Injector Assembly Central Port Injection We guarantee fit and function..
  • This TamerX central port fuel injection assembly for the 1996-2001 Chevrolet/GMC Spider Fuel Injector Assembly GM 4.3L GM V6 Engine. This is a completely Remanufactured SCPI Fuel Injector..
  • The TamerX Spider Assembly is 100% tested to meet or exceed OEM specifications. The replacement of your old unit with the TamerX Spider will provide cleaner emissions, improve fuel economy, and increase performance..
  • The assembly comes with new Viton O-Rings, Fuel Pressure Regulator. Application: Make: Chevrolet,GMC Model: SUV, Truck Engine: 4.3L V6 Year: 1996-2001 Warranty: 1 Year 1,000,000 miles.
Check Stock

Universal Fuel Injector Cleaning Tool, Non-Dismantle Fuel Injector Cleaner Tester Petrol Cleaner Kit 600ML 140PSI

  • 【Professional Cleaner Tool】 Improper cleaning of automobile fuel system will lead to TWC blockage and poisoning. fuel injector cleaner kit is a professional fuel injector cleaner, which can help you clean the whole fuel system quickly and simply, including TWC, intake manifold, throttle and exhaust pipe, etc..
  • 【EFI-Electronic Fuel Injection System】 There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
  • 【Advantage of Non-Dismantle injector】 Can operate non-dismantle cleaning to Fuel System, it can operate cleaning air induction system, optional pipe clamp, fast and safe, multiple connectors match most European Union, Asian, American cars and light trucks..
  • 【Multifunctional Fuel Injection Cleaner Tool】 The non-dismantle cleaner has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connector....
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

Oil Engine Treatment Gifts – Engine Catalytic Converter Cleaning,Fuel Oil Sludge Treatment,Oil Tank Sludge Treatment,Converter Catalytic Cleaner (4 Pcs)

  • 【Easy To Clean】Simply pour in your fuel tank. Safe for gasoline, hybrid, and flex-fuel vehicles.
  • does not alter fuel. Not for use in 2-stroke or oil/gas mix engines..
  • 【Reduce Consumption And Improve Performance】While cutting down on fuel consumption, help clean the fuel injection system, as well as the cylinders, improving overall performance..
  • 【Application】Safe for gasoline, diesel, hybrid and flex-fuel vehicles.
  • does not alter fuel, Not for use in 2-stroke or oil/gas mix engines.Removes harmful deposits to optimize the efficiency of the entire fuel injection system, as well as the cylinders, thereby improving overall performance..
  • 【Deeply Clean Your Converter】Without removing it! Simply pour in your fuel tank. Stop the dreaded “service engine” light flashing up on your display. Car converter cleaner make your car get better engine performance! Decreases the total hydrocarbon emissions from your vehicle by up to 50%. Save the environment, save yourself..
  • 【Optimize Car Performance】Improves overall vehicle performance including driveability issues such as power reduction, hesitation, rough idle, hard starts and lost fuel economy. Make your car even more handy!Proper fuel and exhaust flow will keep this engine cleaner, smoother and ....
Check Stock

Fuel Pressure Gauge Kit，0-140 PSI Fuel Pump Tester，Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool

  • ... ABS Plastic, Iron, and Aluminum. Anti-corrosion materials to ensure long lasting using life.Nylon resin hose is resistant to fuel, wear and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization，Items are protected well in a sturdy case..
  • 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
  • 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Shows.Enclosed with an instruction manual.Note: Not for diesel high pressure injection pump or direct-injection engine.Buy with confidence, We provide 6 months warranty service, if you have any questions, please feel free to contact us via email.We will solve it for you as soon as possible..
Check Stock

Fuel Injector Cleaner Tool Car Fuel System Cleaner Kit Portable Non-Dismantle Cleaning Tools Fuel Injector Tester 600ML 140PSI Injector Cleaning Machine(Without Liquid)

  • 【Multifunctional Fuel Injection Cleaner Tool】 This injector cleaner tool can clean the entire fuel system, including the throttle valve, fuel nozzle and combustion chamber. At the same time, it also has a high and low pressure cleaning function to help you better complete the fuel system cleaning job..
  • 【Disassembly-Free & Dual-System Fuel System Cleaner Kit】The fuel system cleaner kit is used to clean the fuel injector, intake system and three-way catalytic converter. It can clean the car without disassembly. And it has two electronic fuel injection systems. One engine has an oil return pipe, and the other engine does not have an oil return pipe (Quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids.).
  • 【Adjustment of Throttle Mode of Fuel Injector Cleaning Kit】The connection method is the same, just adjust the air source pressure to 1-5PSI. How to identify the inlet and return hoses: ①Generally speaking, the larger the inlet pipe, the smaller the return pipe.
  • ②There is always a filter interface on the side of the inlet hose and a buffer interface on the return side.
  • ③There is an arrow on the hose Indicate the fuel flow direction..
  • 【Widely Applicable Engine Cleaning Tools】 This injector c....
Check Stock

DYRABREST 4-Stroke Diesel Engine Single Cylinder Vertical Diesel Motor Air Cooling Horizontal Gas Engine 196CC

  • ★【Advancement】In the design process, the structure data is analyzed through advanced software, and the design is continuously optimized to ensure the reliability of the diesel engine in terms of structure and work..
  • ★【Compact Structure】Compact structure, small size, light weight. Compared with gasoline engines, it is more economical and reliable..
  • ★【Large-capacity Fuel Tank】3L reinforced and thickened alloy fuel tank, using special painting process, thorough seam welding. Fast heat dissipation, low oil temperature, light weight..
  • ★【Energy Saving】Optimize the fuel system and the intake and exhaust system, and adopt the self-injection fuel system, the fuel is further atomized, the combustion is more thorough, the fuel consumption is low, the fuel injection is more punctual, and the service life is long..
  • ★【Good Heat Dissipation】Excellent structural design, fast heat dissipation of the fuselage, low oil temperature, light weight. Through advanced software analysis and optimization design, the engine structure and cooling curve are guaranteed..
Check Stock

FRAM C1191A Spin-On Fuel Filter

  • Keeps smaller contaminants in the system out of your engine so that it continues running smoothly.
  • Prevents clogging and fuel delivery problems in your fuel line.
  • Exceptional fuel filter to meet the needs of virtually all engine configurations.
  • High technology filtration designed for fuel injection systems and oxygenated fuels.
Check Stock

Lichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, B1BK

  • FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
  • WIDE COMPATIBILITY - Suitable for most gasoline engines on car, truck, SUV, motorcycle, ATV, RV. NOT FOR diesel high pressure injection pump or direct-injection engine, INCOMPATIBLE WITH EFI, CIS or TBI System, INCOMPATIBLE WITH Ford 1/4" Small Schrader Fitting.
  • UP TO 140PSI / 10BAR - Provide with dual scale accurate readings 0-140psi (0-10 bar), easy to read and provide you more precise and accurate readings.
  • ALL IN ONE SET - Equipped with various adapters and hoses to connect for testing, great for 1/4" standard Schrader valve and M6/M8/M10/M12/M14 service port. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles..
  • LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking.
Check Stock