Categories

Best Full Color Strip Display

WS2812B LED Strip Individual Addressable Light 3.2FT 144Pixels/m 144Pixels SMD 5050 RGB Pixel Strip White PCB Full Color LED Pixel Strip Non-Waterproof DC5V

  • Dream full color Programmable LED Strip,WS2812B led, WS2812B IC Built in 5050SMD.256 brightness display and 24-bit color display.It comes with 3pin JST-SM connectors on both ends for easy installation.
  • INDIVIDUALLY ADDRESSABLE LED STRIP: WS2812b is the digitally-addressable pixels type of LED strip. Each SMD 5050 LED has a built-in integrated driver IC, which either allows you to control the color and brightness independently or is beneficial for you to add complex lighting effects to a project accordingly. And it is made of pure gold wire, which has long lifespan..
  • HOW TO MAKE IT WORK? You need a 5V power supply and a pixel controller, or other controlling systems.
  • 3.2ft 144leds require a 5V 9A 45W power supply to make it work(not included). Please don’t use higher than 6V.
  • otherwise, it will destroy the entire strip. Also, each LED can be cut off individually without damaging the rest strip..
  • WIDELY APPLICANTS: WS2812b multi-colored led strips can be applied to hotels, KTV, bar, game room, Christmas decorations to heighten the atmosphere, car/shop/home decoration, and so on. As it is a non-waterproof type, it is merely workable for indoor decorations..
  • Only Support DC5V.Never use DC12V or DC24V. Match use controller can appear colorful curtain-up/ fl....
Check Stock

ALITOVE 12V WS2812B LED Strip Light WS2813 12V RGB Addressable LED Pixel Tape Light WS2815 Programmable LED Felxible Strip 16.4ft/5m 300 LEDs Waterproof IP67 White PCB for Decor Lighting Project

  • 【12V WS2813 LED Strip】 WS2815 LED strip is upgraded version of 5V WS2813 / WS2812B LED strip. For 5M LED strip, even if all the LEDs are turned on full white, 12V version has no voltage drop. You don’t need to inject power as frequently as 5V version..
  • 【Dual-signal wires】 Designed with one data wire and one backup data wire. . Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work..
  • 【Individually addressable】Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display..
  • 【Wide compatibility】It can be programmed with K1000C T1000S etc. It can also be controlled by SP105E SP108E pre-programmed app controllers and SP107E Colorful x2 sound activated music controllers..
  • 【User-friendly Design】Designed with 4pin JST-SM connectors on both ends for easy hooking up. Separate power/ground wires on both ends for injecting power in case of voltage drop. Covered by waterproof silicone tube, which protects it very well and makes it easy to clean, up to IP67 waterproof..
Check Stock

Lytmi Fantasy Classic Kit with Neo 2 Sync Box & 85~90” TV LED Backlight & Smart Light Strip, Ambient Lighting Compatible with Alexa & Google Assistant, App Control

  • 【Infinite Contrast & Dynamic Color Mapping】The Neo Sync Box’s advanced ColorSync technology captures every color pixel from your screen to synchronize into lighting that is accurate and outstanding. The Light Strip’s chip brings 16 millions shades of color in light to selectively process, and display richer, brighter colors for your immersive watching experience..
  • 【Advanced Color Lighting】：The LED Light Strip’s chip brings 16 millions shades of color in light to selectively process, and display richer, brighter colors for enlightening your everyday mood. You can also set the right mood by dimming the brightness in different colors..
  • 【Personalized DIY Creativity】：Shade, cut, and extend(extendable up to 65 feet) the LED light strip to design lighting for your space - whether it’s behind the tv table, under the couch and bed, stairs, or even on the ceilings. It’s where your creativity meets color and lighting in a full-room effect..
  • 【Smart Control】The Lytmi's bluetooth App allows you to remote control, voice control, and a PC software version is provided. Amplify your entertaining experience in living room gaming, bedroom binge watching, or having a cozy movie night by smart controlling your vibe at ea....
Check Stock

Lamomo LED Neon Rope Lights - 24V LED Light Strip Neon Flex DreamColor Chasing Effect Led Strip Light with Remote, IP65 Waterproof Led Light for Bedroom DIY Neon Sign Indoor&Outdoor(Uncuttable)

  • 【Dreamcolor LED Strip Light】① Upgraded on the basis of traditional RGB, displaying multiple colors at the same time in one line to create rainbow-like effects - chasing, dancing, waving, jumping, flowing gives you an amazing visual experience.
  • ② it also could display as normal RGB strips to show solo color in one line..
  • 【4 Static Modes & 10 Dynamic Modes】① - 4 static color modes - 3/7/16 color combinations to create more cool colors, say goodbye to separate color display. ② - 10 dynamic modes - queuing tail mode, trailing mode, flowing mode, left-ward/right-ward running, automatic cycling, color floating, queue trailing to left/right etc. Let your lights inject life, full of vibrant colors..
  • 【Easy Installation 24V Color Chasing LEDs】① - Compared with the traditional 12V, Lamomo 24V color chasing Led Strip offers more stable electric power ensuring brightness；② - Packed with a power adapter, receive it and plug to use it instantly..
  • 【IR Remote Control】PLEASE USE THE REMOTE CONTROL WHEN YOU PLUG IT IN, POINT TO THE RECEIVER. You could lay on the comfort sofa controlling the light conveniently....
Check Stock

HKBAYI 4M 5V 60Leds/M 240pixels programmable WS2812B RGB 5050 LED Strip Individually addressable Dream Color Waterproof IP67 PCB Black (IP67 Waterproof)

  • ...leeve with JST- SM connectors on both ends for easy installation,Each pixel is on a separate PCB, which allows you to cut up the strips into smaller segments if required for your installation..
  • Addressable LEDs allow each individual LED to have a distinct color & brightness to every other LED. It allows you to display most anything on an LED strip that can be displayed on this screen! Full color video, signs, complex chase patterns, persistence of vision projects–really, the sky is the limit..
  • This 5050 Dream Color is a good choice for LED hobbyists：You can expect some cool chases, interesting rainbow patterns, and varying speed fades and patterns,Making led screen, led wall, advertising board, apply to hotel, KTV, bars, Outdoor advertising signs, Christmas or wedding party decoration.
  • Ultra-bright but running at low temperature.
Check Stock

NEON Addressable RGB PC LED Strip Kit, WS2812B RGBIC Rainbow Magnetic ARGB Strip for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, with 12pcs Strong Magnetic Brackets and Controller

  • ➤WIDE COMPATIBLE: Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync etc. which prefect for you DIY gamers to build up any color or animation you desired..
  • ➤DIMMABLE& ADJUSTABLE SPEED: 5-level brightness when the light strip in static mode(single color display), avialiable 5-leve speed in dynamic mode(color changing display) which all adjust by rf remote controller..
  • ➤PACKAGE INCLUDES: 1x ADD RGB extension cable A(for ASUS, MSI, ASROCK ect), 1x ADD RGB extension cable B(for Gigabyte), 1x extension cable, 2x Neon Digital-RGB LED Strip, 1x RF Remote controller together with 1 x 5V SATA connection cable. Airgoo strips support daisy chain, we recommand 4 strips max total. If you need more, please visit Airgoo Store on Amazon..
Check Stock

BTF-LIGHTING Neon WS2812B IC LED RGB PC Light Strip 2PCs 19in Individually Addressable LED Strip for 5V 3-Pin RGB LED headers for Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light

  • ...RGB motherboards with 3 pin +5V ADD_Header (+5V,DATA,N/A,GND) or (+5V,DATA,GND). Please NEVER connect it to 4pin 12V RGB_HEADER (12V, G,R,B). Otherwise you will destroy the entire led strip..
  • 【Cuttable Addressable RGB LED Strip】2PCs 19in BTF-LIGHTING WS2812B LED strip allows for control of each individual LED to display colors independently for nearly unlimited combination of colors and gradients.Two strips can be connected in series and each LED can be cut.Enough light strip length to cut your own desired lengths..
  • 【Various effects】 it can display many cool dynamic color effects, such as rainbow, wave, breathing,strobing,gradual change, color cycle, comet, music sync etc.The super bright led strips for modding your PC case which create amazing RGB sync effects and more brighter, these lights strips perfect for gamers or someone who want to decorate the computer..
  • 【Easy installation】 There is also double-sided tape on the back of the LED light strip, which is suitable for fixing it on any dry and flat surface without any screws or clips. The full kit comes with all the essential parts you may need for your computer. All in one kit, just hook them up, plug and play. Chainable design, you can expand the length by adding more strips..
Check Stock

ACEIRMC 5pcs 12 Bit WS2812 WS2812B Full Color 5050 RGB Lamp Panel Round LED Ring Lamp Light for Arduino (12 Bit)

  • 4-7V Intelligent reverse connect protection.
  • the power supply reverse connection does not damage the IC The control circuit and the LED share the only power source Control circuit and RGB chip are integrated in a package of 5050 components.
  • form a complete control of pixel point Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate Built-in electric reset circuit and power lost reset circuit Each pixel of the three primary color can achieve 256 brightness display.
  • completed 16777216 color full color display, and scan frequency not less than 400Hz/s Cascading port transmission signal by single line Any two point the distance more than 5m transmission signal without any increase circuit When the refresh rate is 30fps, cascade number are not less than1024 points Send data at speeds of 800Kbps The color of the light were highly consistent, cost-effective.
  • Wattage:0.7W Applications Full-color module, Full color soft lights a lamp strip LED decorative lighting, Indoor/outdoor LED video irregular screen.
Check Stock

CHINLY 3.3ft 60leds WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 60 Pixels Dream Color Waterproof IP67 Black PCB 5V DC (Black PCB 3.3ft 60leds Waterproof)

  • Length: 3.3ft , LED SMD Qty: 60pcs RGB SMD5050 per meter , Tube-waterproof IP67 , Black PCB ,DC5V.
  • Dream full color Programmable LED Strip, WS2811 IC Built in 5050SMD, 256 brightness display and 24-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want..
  • Work great with Arduino, ready-to-go library, FastLED library and Raspberry Pi, etc. It’s very easy to program..
  • It comes with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want..
  • It can be used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, Christmas or wedding party decoration, and so on..
Check Stock

WS2812B RGB LED Strip Light 30 Pixels/M Digital Programmable, Aclorol WS2812B Individually Addressable 16.4ft 150 5050 RGB SMD Pixels Dream Color Black PCB 5V Work with Arduino & Raspberry Pi

  • ...is is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with Arduino, FastLED library, Adafruit NeoPixel Library and Raspberry Pi..
  • FULL COLORFUL: 256 brightness display and full 24-bit color display. Each 5050 SMD w/ WS2811 build in can have its own color and brightness. You can control each LED Pixel individually and set it to any color or animation you want.
  • CUTTABLE&CONNECTABLE: This WS2812B Pixel can be cut off without damaging the rest pixels. Each LED strip comes with 3pin JST-SM connectors and can be connected end to end, Maxim base on you controller. So you can DIY for length you want..
  • HOW TO GET IT WORK: First, you will need an output is 5V power supply and controller (Both don’t include). Second, Connect Power and Ground from Power Supply. AND Connect Ground and Control (data) wire to whatever you are driving the string with – Arduino, ESP8266 or any controller..
  • SAFETY & EASY INSTALLATION. Work under DC6V, low voltage for human safety, low power consumption, energy-saving, super-bright but running with low temperature. It comes with self-adhesive 3M tape on its back, ....
Check Stock

DAYBETTER Led Strip Lights 32.8ft Kit with Remote and Power Supply Color Changing

  • RGBIC Color Effect: Our RGBIC technology allows the strip lights to display multiple colors at the same time. Fill your home, bedroom, and kitchen with colorful 5050 LED lights that are sure to boost your mood. (Note: the strip lights are uncuttable).
  • DIY Colored Lighting: Personalize each of the 15 strip light segments to show a different color via the Govee Home app. Simply select your favorite colors from the virtual color palette to create interesting light effects and a more colorful display..
  • Upgraded App Function: The newly-added Chasing and Crossing scene modes provide an animated display, amplifying the atmosphere for your parties. With Govee Home app, you can enjoy 64 Scene modes and a convenient Timer function. (Not Support Alexa).
  • Smart Color Picking: The app can intelligently recognize colors from your pictures and apply them to your smart LED strips. Choose from 9 styles to determine how colors are captured, helping you create the lighting effects you need for any occasion..
  • Easy Installation: Firmly install the lights by sticking the adhesive to any dry, clean surface. For more security, use the provided screws and clips. Easily manage your LED lights from up to 10m away via the Bluetooth app or simply use the control box..
Check Stock

ALITOVE Addressable RGB LED Strip for PC , 5V WS2812B Rainbow Digital Light Strip for ASUS AURA SYNC, MSI MYSTIC LIGHT SYNC, ASRock POLYCHROME RGB 3 pin 5V ADD Header on Motherboard, 40cm 24 LED, 2pcs

  • ... Light Sync and ASRock POLYCHROME RGB motherboards with 3 pin +5V ADD_Header (+5V,DATA,N/A,GND). Please NEVER connect it to 4pin 12V RGB_HEADER (12V, G,R,B). Otherwise you will destroy the entire led strip..
  • Individually Addressable RGB LED Strip ALITOVE WS2812B LED strip allows for control of each individual LED to display colors independently for nearly unlimited combination of colors and gradients. When attached to motherboards with +5V 3-pin addressable RGB support, it can display many cool dynamic color effects, such as rainbow, wave, breathing,strobing,gradual change, color cycle, comet, music sync etc..
  • User-friendly Design The full kit comes with all the essential parts you may need for your computer. All in one kit, just hook them up, plug and play. Chainable design, you can expand the length by adding more strips. 3M VHB Heavy-duty foam adhesive tape on the back, easy to install..
  • A must have for PC DIY illumination ALITOVE Digital Rainbow LED Strip takes PC DIY illumination to the next level with addressable RGB LEDs, increasing lighting possibilities with multiple colors on one strip. It comes with high build quality and durability our users are accustomed to, modders and gamers alike. It is a must have for any enthusiast looking to brighten....
Check Stock

WS2812B ECO LED Strip,BTF-LIGHTING Chasing Effects 5050SMD Individually Addressable 16.4FT 60Pixels/m 300Pixels Flexible Black FPCB Dream Color IP65 Waterproof for Bedroom DIY Projects DC5V

  • ...s.(Power supply or controller is not included).BTF-LIGHTING also provides pure gold wires WS2812B LED Strip..
  • 【Individually Addressable】Dream full color Programmable LED Strip. Chasing Lighting, Rainbow ,Fire ,Meteor, rhythm, etc all kinds of scenes and special effects. WS2812B IC Built in 5050SMD.256 brightness display and 24-bit color display.It comes with 3pin JST-SM connectors on both ends for easy installation and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want..
  • 【DIY Controllers】(Power supply or controller is not included).The addressable RGB IC Chip is built-in the 5050SMD.Each pixel can have its own color and brightness as your wish. Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. Support SP110E SP105E SP108E SP110E SP601E etc Bluetooth APP IR controllers, CSY07 CSY08 X2 SP106E SP107E SP601E SP608E SP611E etc music bluetooth APP controllers,SP511E SP501E etc smart WiFi Alexa music Controllers..
  • 【DC5V,Power】Only Support DC5V.Never use DC12V or DC24V.Light up 1 color（red or green or blue or pure white) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blu....
Check Stock