Categories

Best Fully Automatic Concrete Block

BLUEPOINT BP303A- .27 Caliber semi-automatic powder actuated tool, for 10 shot (6.8 x 11mm) strip load

  • This Fully Automatic Powder-Actuated Fastening Tool is perfect for many applications - fastening drywall track, 2x4s, suspended ceiling applications, insulation, and fastening grating to concrete or steel is a snap..
  • The fully automatic cartridge advance and piston return provides for a higher fastening rate, without the need to manually cycle your tool..
  • The magazine accessory accepts collated strips of 10 fasteners, and an optional narrow-access baseplate allows for use of single fasteners with pre-mounted steel washers..
  • This tool meets ANSI standard A 10.3, as well as OSHA requirements for low velocity tools..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block

  • 6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block.
  • Cut the Hardest Materials: Hard Concrete, Cured Concrete, Reinforced Concrete, Concrete Block, Brick.
  • 17" Overall Length 14" Long Barrel Length.
  • Built for Pros who need the highest quality.
Check Stock

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

Aquabot APRVJR Pool Rover Junior Robotic Above-Ground Pool Cleaner,Color May Vary

  • Pool rover Jr. comes with 40-feet of floating cable, a built-in 2-micron fine reusable filter bag and a power supply transformer.
  • Fully automatic robotic cleaner vacuums any round, oval, or rectangular flat-surface above-ground pool in 1 hour or less without hoses.
  • Powered by a 24-volt pump motor that provides vacuum suction and jet-drive propulsion and works with the touch of a button.
  • Extra-wide non-marring wheels roll over any surface and patented E-Z swivel device ensures a tangle-free cable.
  • reduces chemical, water, and energy costs.
  • 1-year warranty for the motor.Surfaces: Vinyl, Gunite/Concrete Fiberglass, Tile.
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor

  • MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Check Stock

INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer, 1 Quart, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • 75 - 100 square foot coverage for interior or exterior use.
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

Agri-Fab 45-0365 Push Spike Aerator, Black

  • Expose grass to air, nutrients, and water.
  • Steel weight tray holds concrete block, creates pressure and pushes spikes into ground.
Check Stock